Novel ethero atoms containing polyesters based on 2,6‐naphthalendicarboxylic acid: A comparative study with poly(butylene naphthalate)

Poly(butylene naphthalate) (PBN), poly(diethylene naphthalate) (PDEN), and poly(thiodiethylene naphthalate) (PTDEN) were synthesized and characterized in terms of chemical structure and molecular weight. The polyesters were examined by TGA, DSC, and DMTA. All the polymers showed a good thermal stability, even though depending on chemical structure. At room temperature they appeared as semicrystalline materials; the effect of the introduction along the PBN polymer chain of ether oxygen atoms or sulfur ones was a lowering in the T_g value, a decrement of T_m, and a decrease of the crystallization rate. Changing in chemical structure also affects the main α absorption associated with the glass transition which moves to lower temperature and whose energetic requirements decrease. The results were explained as due to the presence of highly flexible C? S? C or C? O? C bonds in the polymeric chain. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1694–1703, 2007     

Interactions of xanthines with activated carbon: II. The adsorption equilibrium

In the present work, we have studied the adsorption of xanthine derivatives by activated carbon sorbents in aqueous solutions. The study comprised both kinetic, equilibrium and thermodynamic aspects. The kinetic results were reported in a previous paper; the equilibrium-related results are discussed here. The two types of carbon used exhibit some differences but the equilibrium isotherms obtained are all of the H-3 type in the classification of Giles. This suggests a high affinity of the sorbents for the sorbates. We also found that the overall adsorption process comprises more than one individual adsorption-desorption process of which one leads to the formation of a “monolayer” and the other to the “precipitation” of the sorbate on the sorbent surface (multilayer adsorption); the amount of sorbate adsorbed in monolayer form was seemingly greater in C-A14.     

Passivation of the calcite surface with malonate ion

Samples of polycrystalline calcite were impregnated with solutions of malonic acid of three concentrations (5 x 10(-2), 5 x 10(-3) , and 5 x 10(-4) M) and different pH values (6.00, 7.00, and 8.00). The impregnation was carried out at room temperature to evaluate the adsorption of malonate ion in the calcite surface to optimize the conditions for possible application on limestone and marble in cultural heritage materials. The affinity of the malonate ion was determined through the potentiometric measurement of the surface charge and the corresponding adsorbed amounts by titration, Raman spectroscopy, and small-angle X-ray scattering (SAXS). The results indicate effective adsorption of the malonate ion on the surface at a pH value close to the point of zero charge (pHpzc approximately 8.20) and changes in some surface morphological properties such as the pore shape and the pore size distribution. The presence of a malonate adsorptive layer on calcite generates an interface interaction potential that may influence the reaction and transport mechanisms within the medium.     

Adsorption of atomic hydrogen at a nanostructured electrode of polyacrylate-capped Pt nanoparticles in polyelectrolyte

Atomic hydrogen electrosorption is reported at crystallite sites of polyacrylate-capped Pt nanoparticles (d = 2.5 +/- 0.6 nm), by assembling nanostructured electrodes of polyacrylate-Pt nanocrystallites layer-by-layer in a cationic polyelectrolyte, poly(diallyldimethylammonium chloride). Cyclic voltammetry in 1 M H2SO4 revealed a strongly adsorbed hydrogen state and a weakly adsorbed hydrogen state assigned to adsorption at (100) and (110) sites of the modified nanocrystallites, respectively. Resolving hydrogen adsorption states signifies that surface capping by the carboxylate groups is not irreversibly blocking hydrogen adsorption sites at the modified Pt nanoparticle surface. Adsorption peak currents increased with increasing the number of layers up to 16 bilayers, indicating the feasibility of nanoparticle charging via interparticle charge hopping and the accessibility of adsorption states within the thickness of the nanoparticle/polyelectrolyte multilayers. Despite similarity in hydrogen adsorption in the cyclic voltammorgrams in 1 M H2SO4, negative shifts in adsorption potentials were measured at the nanocrystallite Pt-polyelectrolyte multilayers relative to a polycrystalline bulk Pt surface. This potential shift is attributed to a kinetic limitation in the reductive hydrogen adsorption as a result of the Pt nanoparticle surface modification and the polyelectrolyte environment.     

Kinetics of the amorphous—anatase phase transformation in copper doped titanium oxide

Samples of TiO₂ doped with 2 and 5 mol% of Cu²⁺ were prepared by the sol-gel process. Titanium(IV) isopropoxide and copper(II) nitrate were used as precursors. The samples were prepared as monolithic shapes, dried at 80°C for 72 h and heat treated at various temperatures in the range 200–900°C for 2 h. The structural transformation and texture of the samples were investigated by X-ray powder diffraction (XRD) and nitrogen adsorption. Significant changes were observed during the crystallization process; on the one hand, the crystallization profiles show that crystallization occurs uniformly and is practically insensitive to the dopant concentration, but when the transformation at a given temperature is followed as a function of time, the rate of the amorphous-anatase transformation is larger for the sample containing 2 mol% Cu²⁺. Electron spin resonance (ESR) results show that in this sample there is no segregation of Cu²⁺ ions. The sample containing 2 mol% of Cu²⁺ was selected for the kinetic studies and the temperatures selected were 300, 325, 350, 375 and 400°C, which were taken from the amorphous to anatase crystallization profile. An activation energy of 137 ± 4 kJ/mol for the crystallization process was estimated from the kinetic data. These results showed that the effect of the open structure present in the TiO₂ amorphous phase provides the atomic mobility required for the crystallization. On the other hand, the differences in the crystallization rate due to the amount of Cu²⁺ were explained by the segregation of copper ions to the surface of the samples.     

Development and validation of a capillary electrophoresis method for the determination of phenothiazines in human urine in the low nanogram per milliliter concentration range using field-amplified sample injection

A capillary zone electrophoresis (CZE) method with ultraviolet-visible detection has been established and validated for the determination of five phenothiazines: thiazinamium methylsulfate, promazine hydrochloride, chlorpromazine hydrochloride, thioridazine hydrochloride, and promethazine hydrochloride in human urine. Optimum separation was obtained on a 64.5 cm x 75 microm bubble cell capillary using a buffer containing 150 mM tris(hydroxymethyl)aminomethane and 25% acetonitrile at pH 8.2, with temperature and voltage of 25 degrees C and 20 kV, respectively. Naphazoline hydrochloride was used as an internal standard. Field-amplified sample injection (FASI) has been applied to improve the sensitivity of the detection. Considering the influence of parameters affecting the on-line preconcentration (nature of preinjection plug, sample solvent composition, injection times, and injection voltage) and due to the significant interactions among them, in this paper we propose for the first time the application of a multivariate approach to carry out the study. The optimized conditions were as follows: preinjection plug of water for 7 s at 50 mbar, electrokinetic injection for 40 s at 6.2 kV, and 32 microm of H3PO4 in the sample solvent. Also, a solid-phase extraction (SPE) procedure is developed to obtain low detection limits and an adequate selectivity for urine samples. The combination of SPE and FASI-CZE-UV allows adequate linearities and recoveries, low detection limits (from 2 to 5 ng/mL), and satisfactory precisions (3.0-7.2% for an intermediate RSD %).     

Application of Task-specific Ionic Liquids for Intensified Separations

Summary. Ionic liquids offer tremendous opportunities to intensify reactions and separations in process technologies by tuning their physical and chemical properties. Several ionic liquids are suitable for the separation of aromatic and aliphatic hydrocarbons. CO₂ absorption behavior was influenced by the functionalized chains appended to the room temperature ionic liquid (RTIL) cation. Ionic liquids seem able to combine the chemical features of amine solutions with the characteristic advantages of the physical solvents used for CO₂ absorption.     

Evidence of impurities in thiolated single-stranded DNA oligomers and their effect on DNA self-assembly on gold

The diversity of techniques used in the synthesis, treatment, and purification of the single-stranded DNA oligomers containing a thiol anchor group (SH-ssDNA) has led to a significant variation in the purity of commercially available SH-ssDNA. In this work, we use X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectrometry (ToF-SIMS) to study how the impurities present in commercially synthesized SH-ssDNA oligomers affected the structure of the resulting DNA films on Au. XPS results indicate that two of the purchased SH-ssDNA oligomers contain excess carbon and sulfur. The molecular fragmentation patterns obtained with ToF-SIMS were used to determine the identity of several contaminants in the DNA films, including poly(dimethylsiloxane) (PDMS), lipid molecules, and sulfur-containing molecules. In particular, the ToF-SIMS results determined that the excess sulfur detected by XPS was due to the presence of dithiothreitol, a reductant often used to cleave disulfide precursors. Furthermore, we found that the SH-ssDNA self-assembly process is affected by the presence of these contaminants. When relatively pure SH-ssDNA is used to prepare the DNA films, the P, N, O, and C atomic percentages were observed by XPS to increase over a 24-h time period. In contrast, surfaces prepared using SH-ssDNA containing higher levels of contaminants did not follow this trend. XPS result indicates that, after the initial SH-ssDNA adsorption, the remaining material incorporated into these films was due to contamination.     

Electroreduction of the antifouling agent TCMTB and its electroanalytical determination in tannery wastewaters

The electrochemical reduction of antifouling agent 2-thiocyanomethylthiobenzothiazole (TCMTB) was investigated by cyclic and pulse differential voltammetry. The irreversible electrode reduction of TCMTB proceeded by ECEC reaction mechanism by two electrons transfer with one irreversible wave. Upon the basis of electrochemical evidence, the electrodic reaction mechanism was suggested to formation of mercaptobenzothiazole (MTB) in solution.Subsequently, a pulse differential method is described for the formation of TCMTB based on this electroreduction. Having been obtained a detection limit of 1.0 × 10⁻⁷ mol L⁻¹ and recovery to 98% to concentration of 2.0 × 10⁻⁶ mol L⁻¹. Therefore, the proposed method in this study is practical, sensitive and accurate for the analysis of TCMTB in tannery wastewater samples.     

Diastereoselective synthesis of substituted 2,3,4,5‐tetrahydro‐1H‐1‐benzazepine‐5‐carboxylic esters by a tandem reduction‐reductive animation reaction

An efficient, diastereoselective synthesis of substituted and unsubstituted 2,3,4,5‐tetrahydro‐1H‐1‐benzazepine‐5‐carboxylic esters has been developed based on the tandem reduction‐reductive amination reac tion. Catalytic hydrogenation of a series of 2‐(2‐nitrophenyl)‐5‐oxoalkanoic esters initiates a reaction sequence involving (1) reduction of the aromatic nitro group, (2) condensation of the N‐hydroxylamino (or amino) nitrogen with the side chain carbonyl, and (3) reduction of the seven‐membered cyclic imine. Cyclizations that produce 2‐alkyl‐2,3,4,5‐tetrahydro‐1H‐1‐benzazepine‐5‐carboxylic esters are diastereose lective for the product having the C2 alkyl and the C5 ester groups cis. In these reactions, the transannular ester group exerts a strong stereodirecting effect on the reduction of the cyclic imine intermediate, though not as strong as that observed in previous closures of 2‐alkyl‐1,2,3,4‐tetrahydroquinoline‐4‐carboxylic esters. This decrease in diastereoselectivity is attributed to (1) the greater distance between the ester and the imine double bond and (2) the increased conformational mobility of the larger ring, both of which diminish the stereodirecting effect of the ester. Finally, formation of the seven‐membered ring is sufficiently slow that reaction with the side chain ester group competes with heterocycle formation in several of the reactions.