STRUCTRE AND PROPERTIES OF COMPOSITE Ni/HARD CARBON FILMS PREPARED BY PLASMA DEPOSITION

IntroductionHardcarbonfilmsprcparcdb}'vari0usplasmaprocesscsareofc0nsidcrablcinterestbccauscofthcirunusualmcchanical-opticalandelcctricalpropertiesll~3l.Rccently,ithasReceive(IJl111c5,l9`)5;,.`,1iis()tI1ie)\tioII,1'ceil'edJtl1)'l4,l995*'I11isprojectiss[1pportcdh}tl1cNatiol1a1Nat[lntlScicl1ccI`()ul1dati()l1ofCl1il1aal1dtl1eI,aboraton'ofSolidI,ubricati()l1,l.al1/l10ulnstitutcofCl1cn1icalPh\'sics,111cChincscAcadcl11\'ofScicnccs.benfoundthattheinc0rporati0nofmetaIintocarbonfilmscangrcatl}'…     

无溶剂法大量制备高效红光碳点及其在白光器件中的应用

以邻苯二胺、 2,5-二氨基苯磺酸和三氯化铝为原料, 通过无溶剂法大量制备了高效的红色荧光碳点 (R-CDs). 制得的碳点尺寸大约为2.4 nm, 含有13%的氮元素, 主要由高度石墨化的碳核及覆盖在其表面的大量官能团构成. 在不同的波长光激发下, 碳点在乙醇溶液中表现出不依赖于激发的红光发射, 其荧光峰位于 704 nm, 最大量子产率达到22%. 由于R-CDs具有优异的光学性质, 利用其构筑了紫外光激发的碳基白色发光二极管, 其色坐标为(0.33, 0.33), 非常接近自然光. 该研究为高效红色荧光碳点的大量制备提供了一种新路径, 同时拓宽了其在白光器件中的应用.     

Low Temperature Catalytic Hydrolysis of Carbon Disulfide on Activated Carbon Fibers Modified by Non-thermal Plasma

In order to improve the carbon disulfide (CS₂) catalytic hydrolysis efficiency of activated carbon fibers (ACFs), ACFs surface was modified by non-thermal plasma (NTP). In particular, the effects of modification conditions on the catalyst properties were studied, including the reactor structure, modification atmosphere, modification time, output voltage and discharge gap. The catalytic activity study showed that ACFs with NTP modification enhanced CS₂ catalytic hydrolysis. The optimal reactor structure, modification atmosphere, modification time, output voltage and discharge gap was a coaxial cylinder, an N₂ atmosphere, 5 min, 7 kV and 7.5 mm, respectively. The effect of the NTP modification on the micro-structural properties of the ACFs was characterized using scanning electron microscopy (SEM), Brunauer–Emmett–Teller (BET) and X-ray photoelectron spectroscopy (XPS) methods. The results showed that NTP modification improved the dispersion of functional groups and increased the number of oxygen-containing and nitrogen-containing functional groups, thus the catalytic activity could be enhanced. The present results indicated that NTP modification was an effective way to manipulate ACFs surface properties for the CS₂ catalytic hydrolysis reaction.     

Fabrication of silicon microwire arrays for?photovoltaic?applications

A?novel method of combining photolithography, wet chemical etching and oxidation process was proposed to fabricate large area of silicon microwire (SiMW) arrays. The dimensions of the SiMWs can be easily controlled by photomask and etching conditions. Solar cells based on the heterojunction between SiMW and double-walled carbon nanotubes (DWNTs) were constructed. The initial test on the DWNT/SiMW shows efficiency (??) of?0.59%. By adding a few drops of HBr/B₂ electrolyte, the efficiency was improved to 1.96% with J _sc=19.2?mA/cm² and V _oc=0.35?V, FF=29.2%, showing the potential of SiMWs in photovoltaic applications.     

Recent Development of Durable and Self‐Healing Surfaces with Special Wettability

Artificial special wetting surfaces have drawn much interest due to their important applications in many fields. Nevertheless, tremendous challenges still remain for the fabrication of wetting surfaces with durable and self‐healing properties. Here, recent progress of durable, self‐healing wetting surfaces is highlighted by discussing the fabrications of several typical wetting surfaces including superhydrophobic surfaces, superamphiphobic surfaces, underwater superoleophobic surfaces, and high hydrophilic antifouling surfaces based on expertise and related research experience. To conclude, some perspectives on the future research and development of these special wetting surfaces are presented.

     

液体表面张力系数的实验研究

改变液体的浓度可以调控液体的表面张力系数,各种形状膜架的挂膜时间与液体表面张力系数存在着一定的关系,本文对于这两个方面进行了实验研究,得出了相应的结果.此外,溶液的温度和空气的流动对挂膜时间都会产生影响.     

Flame synthesis of few-layered graphene/graphite films

We report a fast (in 10-40 s) flame synthesis of high quality few-layered graphene/graphite films, offering the advantages of simplicity, high efficiency, energy saving, low cost and the ability to extend to continuous and mass production of graphene.     

基于DIS系统测定自制音叉振动频率的研究

利用自制装置将音叉的振动转换为感应电流,使用数字信息化系统(DIS)微电流传感器,变更测量参量,从而测定出待测音叉的频率.     

Preparation of polyacrylonitrile-based activated carbon fiber for CS2 adsorption

Research on Chemical Intermediates - Polyacrylonitrile (PAN)-based activated carbon fiber (ACF) was prepared by CO2 and KOH activation method, respectively, and used for the adsorption of CS2 at...     

From layered double hydroxide to spinel nanostructures: facile synthesis and characterization of nanoplatelets and nanorods

Mg-Al spinel (MgAl2O4) nanorods and nanoplatelets transformed from Mg-Al layered double hydroxide (Mg-Al-LDHs) were synthesized via a combined hydrothermal method and calcination route using Al(NO3).9H2O and Mg(NO3)2.6H2O as raw materials. The nanorods and nanoplatelets were characterized by means of physical techniques, including powder X-ray diffraction (XRD), transmission electron microscopy (TEM), high-resolution transmission electron microcopy (HRTEM), selected-area electron diffraction (SAED), Fourier transform infrared spectra (FT-IR), thermogravimetric (TG), and nitrogen adsorption-desorption isotherms. XRD patterns reveal that the Mg-Al-LDHs nanostructures were obtained under a hydrothermal reaction temperature of 200 degrees C and Mg-Al spinel nanostructures were fabricated via calcination of the Mg-Al-LDHs nanostructures at 750 degrees C. It can be seen from TEM that the sizes of the Mg-Al-LDHs nanoplatelets were about 20-40 nm and the diameters of the MgAl2O4 nanorods were ca. 6 nm. The HRTEM images indicate that the crystal lattice spaces of the MgAl2O4 nanorods and nanoplatelets are 0.282 and 0.287 nm, respectively.