Metal components analysis of metallothionein-III in the brain sections of metallothionein-I and metallothionein-II null mice exposed to mercury vapor with HPLC/ICP-MS

Mercury vapor is effectively absorbed via inhalation and easily passes through the blood–brain barrier; therefore, mercury poisoning with primarily central nervous system symptoms occurs. Metallothionein (MT) is a cysteine-rich metal-binding protein and plays a protective role in heavy-metal poisoning and it is associated with the metabolism of trace elements. Two MT isoforms, MT-I and MT-II, are expressed coordinately in all mammalian tissues, whereas MT-III is a brain-specific member of the MT family. MT-III binds zinc and copper physiologically and is seemed to have important neurophysiological and neuromodulatory functions. The MT functions and metal components of MTs in the brain after mercury vapor exposure are of much interest; however, until now they have not been fully examined. In this study, the influences of the lack of MT-I and MT-II on mercury accumulation in the brain and the changes of zinc and copper concentrations and metal components of MTs were examined after mercury vapor exposure by using MT-I, II null mice and 129/Sv (wild-type) mice as experimental animals. MT-I, II null mice and wild-type mice were exposed to mercury vapor or an air stream for 2 h and were killed 24 h later. The brain was dissected into the cerebral cortex, the cerebellum, and the hippocampus. The concentrations of mercury in each brain section were determined by cold vapor atomic absorption spectrometry. The concentrations of mercury, copper, and zinc in each brain section were determined by inductively coupled plasma mass spectrometry (ICP-MS). The mercury accumulated in brains after mercury vapor exposure for MT-I, II null mice and wild-type mice. The mercury levels of MT-I, II null mice in each brain section were significantly higher than those of wild-type mice after mercury vapor exposure. A significant change of zinc concentrations with the following mercury vapor exposure for MT-I, II null mice was observed only in the cerebellum analyzed by two-way analysis of variance. As for zinc, the copper concentrations only changed significantly in the cerebellum. Metal components of metal-binding proteins of soluble fractions in the brain sections were analyzed by size-exclusion high-performance liquid chromatography (HPLC) connected with ICP-MS. From the results of HPLC/ICP-MS analyses, it was concluded that the mercury components of MT-III and high molecular weight metal-binding proteins in the cerebellum of MT-I, II null mice were much higher than those of wild-type mice. It was suggested that MT-III is associated with the storage of mercury in conditions lacking MT-I, and MT-II. It was also suggested that the physiological role of MT-III and some kind of high molecular weight proteins might be impaired by exposure to mercury vapor and lack of MT-I and MT-II.     

Measurement of attachment force of microbial cells

A parallel-plate flow chamber consisting of two transparent electro-conductive glass plates was constructed. The two glass plates were set parallel to each other and connected to a potentiostat apparatus to regulate the strength of the electric field between the plates. A microbial cell suspension was flowed through the chamber. This system enabled the application of an electrostatic force to suspend charged particles, e.g. microbial cells, existing between the two plates. The time course of the cell attachment of Pseudomonas syringae pv. atropurpurea NIAES 1309 suspended in 10 mM phosphate buffer solution (pH 7.0) to the glass plate was investigated at various electric field strengths ranging from −4.2 to +4.1 V cm⁻¹. The attachment rate and the maximum number of attached cells increased linearly with the increase in the strength of the positive electric field. In contrast, the rate and the number of cells decreased linearly with the decrease in the strength of the negative electric field. These linear relations gave a specific value for the strength of the electric field (−5.9 ± 0.7 V cm⁻¹) where the electrostatic repulsion and the microbial attachment force were thought to be equal, resulting in no cell attachment. From this value, the electrostatic repulsion, i.e. the microbial attachment force, was calculated to be 5.0 × 10⁻¹¹ N cell⁻¹ for cells of average size.     

Cellulose Synthesized by Acetobacter Xylinum in the Presence of Acetyl Glucomannan

Acetobacter xylinum was cultured in Hestrin-Schramm medium (control medium) and Hestrin-Schramm medium containing acetyl glucomannan (mannan medium). Loose bundles of the cellulose microfibrils are formed in the mannan medium in contrast to the normal ribbons being produced in the control medium. Rapid-freeze and substitution method followed by metal-shadowing revealed the droplet-like structures around the microfibril synthesized in the mannan medium. The cellulose synthesized in the mannan medium was stained heavily by the periodic acid-thiocarbohydrazide-silver proteinate (PATAg) method, while the cellulose synthesized in the control medium was not stained. X-ray diffractometry and FT-IR spectroscopy indicated that the addition of mannan induced a change in the crystal structure from the algal-bacterial type to the cotton-ramie type. Thus the presence of acetyl glucomannan in the medium prevents the assembly of cellulose microfibrils and changes the crystal structure of cellulose.     

Selective Formation of Spinel Iron Oxide in Thin Films by Complexing Agent-Assisted Sol-Gel Processing

The structure of iron oxide was controlled by regulating the hydrolytic polymerization of aquo iron complexes with organic polydentate ligands such as diols. Iron oxides were prepared by calcining the precursor polymers obtained from iron nitrate nonahydrate and diols. When the diols were 1,2-pentanediol, 1,2-hexanediol and 1,2-octanediol, α-Fe₂O₃ with corundum structure appeared exclusively or as the main crystalline phase, in spite of the amount of diol used and the calcination temperature. In the case of 1,2-decanediol and 1,2-dodecanediol, when five moles of the diols were used to one mole of iron nitrate and the calcination temperatures were below 400°C, ψ-Fe₂O₃ with spinel structure appeared as the main phase and, when less than five moles of the diols were used, α-Fe₂O₃ appeared exclusively or as the main phase, irrespective of the calcination temperature. This tendency was also observed in thin films. Thus, a transparent magnetic film composed of γ-Fe₂O₃ could be prepared by applying a benzene solution of the iron polymer, obtained with 5 equivalents of 1,2-decanediol, on quartz and calcining the gel film at 350°C.     

Cp/mas 13c nmr and Electron Diffraction Study of Bacterial Cellulose Structure Affected by Cell Wall Polysaccharides

Acetobacter xylinum was cultured in Schramm–Hestrin medium containing pectin (pectin medium), xylan (xylan medium), or glucomannan (mannan medium). X-ray diffractometry revealed that xylan and glucomannan affected the size of the cellulose crystals and their d-spacing values. Solid-state cross polarization magic angle spinning carbon-13 nuclear magnetic resonance spectroscopy indicated that the ratio of cellulose I was reduced by the addition of polysaccharides. These effects were more remarkable on the cellulose in the mannan medium than that in the xylan medium, and were scarcely observed in the pectin medium. Electron diffraction analysis revealed that these effects on hemicelluloses along cellulose microfibrils are continuous in the mannan medium and discontinuous in the xylan medium. These findings suggest that the uronic acid in the polysaccharides prevents interactions with cellulose leading to alterations of the structure of the cellulose crystal.     

Formal catalytic asymmetric total synthesis of fostriecin

The common synthetic intermediate of a potent and promising anticancer agent, fostriecin, was synthesized using a unique method that combines four catalytic asymmetric reactions as shown above.     

Dioxopyrrolines. LXII. Diels-Alder reaction of 1-Aryl-4- and 5-methoxycarbonyl-1H-pyrrole-2,3-diones with various 1,3-dienes

Two new dioxopyrrolines (1-aryl-4-methoxycarbonyl-1H-pyrrole-2,3-dione 6 and the 5-methoxycarbonyl isomer 8) behaved as good dienophiles to some kind of 1,3-dienes examined. In most cases, the products were explained by the reaction where the largest lobe of HOMO of dienes reacted to the larger LUMO of dienophiles in an expected cis-endo manner. However, in the reactions of 8 with alkylbutadienes, piperylene and isoprene, abnormality in the reaction was observed, which was well explained by taking account of steric factors.     

Selective formation of AAB- and ABC-type heterotrimeric alpha-helical coiled coils

The alpha-helical coiled coils have a representative amino acid sequence of (abcdefg)(n) heptad repeats. We previously reported that two peptides named IZ-2A and IZ-2W formed an (IZ-2A)(2)/IZ-2W heterotrimer with an Ala-Ala-Trp interaction in the hydrophobic core. In this paper, we describe the selective formation of AAB- and ABC-type heterotrimers. To increase the selectivity of the AAB-type heterotrimeric formation, Lys residues at the f position were mutated to either an Ala or a Gln residue to form IZ-2A(fA) or IZ-2W(fQ). Separately, both IZ-2A(fA) and IZ-2W(fQ) have a random structure at pH 7 and 20 degrees C. However, together IZ-2A(fA) and IZ-2W(fQ) form a 2:1 complex with a thermal transition midpoint (Tm) of 48 degrees C. This procedure was applied to prepare the ABC-type heterotrimer, in which two sets of Ala-Ala-Trp interactions were designed in the hydrophobic core. Interhelical interaction between the e and g positions and the alpha-helical propensity of the amino acid at the f position were also considered in the design. The resultant three peptides selectively formed the ABC-type heterotrimer with a Tm of 51 degrees C. Other peptide combinations had random coil properties.