WIDE RANGE DETECTOR USING PARABOLIC CYLINDRICAL MIRROR FOR THz APPLICATIONS

A new, wide-band, high-speed and high-sensitivity THz detector has been developed. The prototype detector consists of a parabolic cylindrical mirror, a long wire antenna and a Schottky barrier diode. Direct detection measurements have shown a stable sensitivity of 150 ± 50 V/W for 1–2 THz without any adjustments. The long wire antenna was fixed at the focus of parabolic cylindrical mirror then it has been realized less operation steps, easy coupling to the external THz signals and a dramatic enhancement in the practicality of this system. The optically polished mirror and frosted surface one showed comparable sensitivities, thus easy polishing and less cost mirror fabrication can be applied for this system. The radiation pattern showed a maximum radiation angle of approximately 23° with its dominant main lobe, which was attributed to the wire antenna character and confirmed good agreements with classical antenna theory.     

HCN laser scattering on the JIPP T-IIU tokamak

A 4-channel HCN laser scattering system has been developed and applied to the JIPP T-IIU tokamak. Main aim of this system is to study microturbulence excited in the plasma, especially in the high power ICRF heating experiment. The observed density fluctuations are in a frequency range of the electron diamagnetic drift wave and have broad frequency spectra. The main part of the wavenumber is found to satisfy the condition of . In the heating experiments, deterioration of the energy confinement time is observed, and the density fluctuation level increases with the increase of the heating power.     

Synthesis, structure, and physical properties of 1,11-o-benzeno[2]orthocyclo[2](1,2)tropyliophane

The title compound (2) has been synthesized, the structure and the physical properties of which are investigated by X-ray, spectroscopic analyses, and MO calculations. There exists charge transfer (CT) interaction between the tropylium ion and the facing phenyl ring. From the pK_R⁺ value of 2, it can be clear that the cation 2 is stabilized by the CT interaction. In spite of the presence of bond weakening σ-π orbital mixing, the cation 2 withstands retro[4+4]type bond cleavage, which is quite interesting when compared to a facile cleavage for the congener with anthracene photodimer type structure.     

Design and synthesis of highly sensitive and selective fluorescein-derived magnesium fluorescent probes and application to intracellular 3D Mg2+ imaging

The role of intracellular magnesium ions is of high interest in the fields of pharmacology and cellular biology. To accomplish the dynamic and three-dimensional imaging of intracellular Mg2+, there is a strong desire for the development of optimized Mg2+ fluorescent probes. In this paper we describe the design, synthesis, and cellular application of the three novel Mg2+ fluorescent probes KMG-101, -103, and -104. The compounds of this series feature a charged beta-diketone as a binding site specific for Mg2+ and a fluorescein residue as the fluorophore that can be excited with an Ar+ laser such as is widely used in confocal scanning microscopy. This molecular design leads to an intensive off-on-type fluorescent response toward Mg2+ ions. The two fluorescent probes KMG-103 and -104 showed suitable dissociation constants (Kd,Mg2+ = 2 mM) and nearly a 10-fold fluorescence enhancement over the intracellular magnesium ion concentration range (0.1-6 mM), allowing high-contrast, sensitive, and selective Mg2+ measurements. For intracellular applications, the membrane-permeable probe KMG-104AM was synthesized and successfully incorporated into PC12 cells. Upon application of the mitochondria uncoupler FCCP to the probe-incorporated cells, the resulting increase in the free magnesium ion concentration could be followed over time. By using a confocal microscope, the intracellular 3D magnesium ion concentration distributions were satisfactorily observed.     

Effect of surface covering of lactose carrier particles on dry powder inhalation properties of salbutamol sulfate

The effect of the surface covering of lactose carrier particles on the dry powder inhalation properties of salbutamol sulfate was investigated. Lactose carrier surfaces were covered with sucrose tristearate (J-1803F) by a high-speed elliptical-rotor-type powder mixer (Theta-Composer). In the present study, drug/carrier powder mixtures were prepared consisting of micronized salbutamol sulfate and lactose carriers with various particle surface conditions prepared by surface covering. These powder mixtures were aerosolized by a Jethaler), and the in vitro inhalation properties of salbutamol sulfate were evaluated by a twin impinger. Compared with the powder mixed with uncovered lactose carrier, the in vitro inhalation properties of the powder mixture prepared using the surface covering lactose carrier were significantly different, showing that the in vitro inhalation properties of salbutamol sulfate were improved. In vitro inhalation properties increased with the percentage of J-1803F added. Using this surface covering system would thus be valuable for increasing the inhalation properties of dry powder inhalation with lactose carrier particles.     

Influence of storage humidity on the in vitro inhalation properties of salbutamol sulfate dry powder with surface covered lactose carrier

The influence of storage humidity on the in vitro inhalation properties of salbutamol sulfate dry powder with surface covered lactose carrier was investigated. In the present study, drug/carrier powder mixtures were prepared consisting of micronized salbutamol sulfate and lactose carriers with different particle surface conditions prepared by surface covering. Lactose carrier surfaces were covered with vegetable magnesium stearate (Mg-St-V) by a high-speed elliptical-rotor-type powder mixer (Theta-Composer). These powder mixtures were aerosolized by a Jethaler), and the in vitro inhalation properties of salbutamol sulfate were evaluated by a twin impinger. Compared with the powder mixed with uncovered lactose carrier, the in vitro inhalation properties of the powder mixture prepared using the surface covered lactose carrier were little decreased with increased in relative humidity (RH), showing that the in vitro inhalation properties of salbutamol sulfate were improved at high RH. Using this surface covering technique would thus be valuable for storage humidity of dry powder inhalation (DPI) with lactose carrier particles.     

Electrodeposition of manganese and molybdenum mixed oxide thin films and their charge storage properties

Manganese and molybdenum mixed oxides in a thin film form were deposited anodically on a platinum substrate by cycling the electrode potential between 0 and +1.0 V vs Ag/AgCl in aqueous manganese(II) solutions containing molybdate anion (MoO(4)2-). A possible mechanism for the film formation is as follows. First, electrooxidation of Mn2+ ions with H2O yields Mn oxide and protons. Then, the protons being accumulated near the electrode surface react with MoO(4)2- to form polyoxomolybdate through a dehydrated condensation reaction (by protonation and dehydration). The condensed product coprecipitates with the Mn oxide. Cyclic voltammetry of the Mn/Mo oxide film-coated electrode in aqueous 0.5 M Na2SO4 solution exhibited a pseudocapacitive behavior with higher capacitance and better rate capability than that of the pure Mn oxide prepared similarly, most likely as a result of an increase in electrical conductivity of the film. Electrochemical quartz crystal microbalance and X-ray photoelectron spectroscopy clearly demonstrated that the observed pseudocapacitive behavior results from reversible extraction/insertion of hydrated protons to balance the charge upon oxidation/reduction of Mn3+/Mn4+ in the film.     

Electronic relaxation of molecular exciplexes in the vapor phase

Interaction of electronically excited TCNB (tetracyanobenzone) and ground-state MB (methylated benzenes) leads to the formation of fluorescent exciplexes in the vapor phase. Studies of exciplex fluorescence as a function of excess vibrational energy in TCNB and of temperature and pressure of added buffer gas, lead to the conclusion that the low-frequency inter-molecular vibrations play a very important role in the radiationless deactivation of exciplexes. The results also indicate that collisional relaxation of low-frequency intermolecular vibrations proceeds much more rapidly than that of high-frequency intramolecular vibrations.     

CHOICE OF COATINGS FOR THE OPTICAL ELEMENTS IN THE IRRADIATION SYSTEM OF VACUUM-ULTRAVIOLET RADIATION ABOVE 50 nm

The spectral throughput of a vacuum-ultraviolet irradiation system at the SOR-RING facility was examined with various combinations of aluminum-and gold-coated optical elements in a 2.2-m modified Wadsworth monochromator. We found that the optimum was a combination of an aluminum-coated collimating mirror, concave grating, and plane deflecting mirror, and a combination of a gold-coated collimating mirror, concave grating and an aluminum-coated plane deflecting mirror in the wavelength regions 190-110 nm and 110-50 nm, respectively.     

QUATERNARY STRUCTURE OF PEA PHYTOCHROME I DIMER STUDIED WITH SMALL-ANGLE X-RAY SCATTERING and ROTARY-SHADOWING ELECTRON MICROSCOPY

Abstract— The quaternary structure of pea phytochrome type I (PI) dimer in the red-light-absorbing form was studied by small-angle X-ray scattering (SAXS) technique and rotary-shadowing electron microscopy. Structural parameters for PI 114 kDa chromopeptide dimer and its tryptically digested N-terminal 59 kDa chromopeptide monomer, such as average electron density, molecular volume and the second moment of electron density distribution, were determined in terms of SAXS using the contrast variation method. Furthermore, by means of model simulation for the scattering profiles of the chromopeptides, most plausible structural models for both peptides were constructed. The distance between the chromophoric domains was estimated to be about 70 A in the resultant model for 114 kDa chromopeptide dimer. Furthermore, the model was consistent with the electron-micrographic images of both the intact PI dimer and the PI 114 kDa chromopeptide dimer, so that the N-terminal 7 kDa fragment did not significantly contribute the low-resolution images of the dimer.