Synthesis, structure and physical properties of Ru ferrites: BaMRu5O11 (M=Li and Cu) and BaM′2Ru4O11 (M′=Mn, Fe and Co)

The synthesis, structure, and physical properties of five R-type Ru ferrites with chemical formula BaMRu₅O₁₁ (M=Li and Cu) and BaM′₂Ru₄O₁₁ (M′=Mn, Fe and Co) are reported. All the ferrites crystallize in space group P6₃/mmc and consist of layers of edge sharing octahedra interconnected by pairs of face sharing octahedra and isolated trigonal bipyramids. For M=Li and Cu, the ferrites are paramagnetic metals with the M atoms found on the trigonal bipyramid sites exclusively. For M′=Mn, Fe and Co, the ferrites are soft ferromagnetic metals. For M′=Mn, the Mn atoms are mixed randomly with Ru atoms on different sites. The magnetic structure for BaMn₂Ru₄O₁₁ is reported.     

An integral representation for decomposable measures of measurable functions

Summary We start with a measurem on a measurable space (,A), decomposable with respect to an Archimedeant-conorm on a real interval [0,M], which generalizes an additive measure. Using the integral introduced by the second author, a Radon-Nikodym type theorem, needed in what follows, is given.The integral naturally leads to a -decomposable measurem on the space of all measurable functions from to [0, 1]. The main result of the present paper is the converse of this, namely that, under natural conditions, any -decomposable measurem on can be represented as an integral of a certain Markov-kernelK. We extend this representation to measures on which have values in a set of distribution functions.These results generalize the work done by the first author in the case of additive measures.     

Synthesis and thermal transformations of polyphosphosiloxane based on trimethyl phosphate and (3-aminopropyl)triethoxysilane

A method for the synthesis of polyphosphosiloxane by the thermal condensation of an equimolar mixture of trimethyl phosphate and (3-aminopropyl)triethoxysilane at 200 °C was developed. The reaction affords ethanol and polyphosphosiloxane-{Si(OEt)[(CH₂)₃NR¹R²]-O-P(O)(OMe)-O}_n-(R¹ = H, Me; R² = Me), whose composition and structure were confirmed by ¹H, ¹³C, and ³¹P NMR spectroscopy, IR spectroscopy, and elemental analysis. The scheme of polymerization involving the intermediate formation of methyl-and dimethylphosphoric acids and their condensation with ethoxysilanes was proposed. The calcination of the obtained polyphosphosiloxane in vacuo at 350 °C results in the elimination of the amino groups and alkoxide substituents, and a spatially cross-linked polymer is formed as an amorphous powder. Its further thermolysis at 600 and 1000 °C gives crystalline phosphosilicates Si₅O(PO₄)₆ or SiP₂O₇. Their amorphous and crystalline samples were characterized by IR spectroscopy, X-ray diffraction analysis, and solid-state ¹³C and ³¹P spectroscopy. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2138–2148, November, 2007.     

Sol–gel derived ZnO nanoparticulate films for ultraviolet photodetector (UV) applications

Zinc oxide nanoparticles based UV detector was fabricated on thermally oxidized silicon substrate. ZnO nanoparticle films were deposited using sol–gel route. The seed solution was prepared using two different solvents (methanol and isopropyl alcohol (IPA)). The surface morphology of the prepared films was characterized by FESEM. Structural characterization along with optical measurements was carried out using XRD and UV–vis spectroscopy. For the UV photo-detector, ZnO thin film prepared in IPA is selected based on their structural and optical analysis. The changes in photo-response of ZnO thin film with respect to time was studied under the dark and variable UV intensities. It was observed that the photocurrent increased with a factor of 4.82 under 1.16 mW of UV intensity. It is believe that the synthesized ZnO thin films have potential to use in the ultraviolet photo-detector applications.     

A Methodology for Temperature Correction When Using Two-Color Pyrometers - Compensation for Surface Topography and Material

In this investigation, the applicability of the two-color pyrometer technique for temperature measurements in dry hard turning of AISI 52100 steel was studied, where both machined surfaces as well as cutting tools were considered. The impacts of differing hard turned surface topography on the two-color pyrometer readings was studied by conducting temperature measurements on reference samples created using cutting tools with different degrees of tool flank wear. In order to conduct measurements in a controlled environment, a specially designed furnace was developed in which the samples were heated step-wise up to 1,000 °C in a protective atmosphere. At each testing temperature, the temperatures measured by the two-color pyrometer were compared with temperatures recorded by thermocouples. For all materials and surfaces as studied here, the two-color pyrometer generally recorded significantly lower temperatures than the thermocouples; for the hard turned surfaces, depending on the surface topography, the temperatures were as much as ~20 % lower and for the CBN cutting tools, ~13 % lower. To be able to use the two-color pyrometer technique for temperature measurements in hard turning of AISI 52100 steel, a linear approximation function was determined resulting in three unique equations, one for each of the studied materials and surfaces. By using the developed approximation function, the measured cutting temperatures can be adjusted to compensate for differing materials or surface topographies for comparable machining conditions. Even though the proposed equations are unique for the hard turning conditions as studied here, the proposed methodology can be applied to determine the temperature compensation required for other surface topographies, as well as other materials.