Diffusion Structural Analysis Study of Titania Films Deposited by Sol-Gel Technique on Silica Glass

The diffusion structural analysis (DSA) was used to characterize microstructure changes of hydrous titania gel films under in situ conditions of heating. TG and DTA were used in order to elucidate the processes controlling the formation of anatase film during heating of hydrous titania gel film. The annealing of porosity and near surface structure defects of the dehydrated titania films was indicated by DSA in the temperature range 255–700°C as the decrease of radon release rate. It was demonstrated that the annealing was enhanced on heating in oxygen in comparison with heating in argon. The DSA experimental results were compared with model curves describing the radon diffusion mobility and the annealing of radon diffusion paths.     

Preparation and properties of the biodegradable graded blend of poly(L‐lactic acid) and poly(ethylene oxide)

We prepared biodegradable poly(ethylene oxide) (PEO)/poly(L ‐lactic acid) (PLLA) graded blends by the dissolution–diffusion process, and discussed the biodegradability and tensile strength of the graded blends by comparing isotropic blend and PLLA only. All the graded blends were degraded more largely than the PLLA only and isotropic blend (PEO: 37.5 wt %), which had the same content as the total content of those graded blends. The graded blend having most excellent wide compositional gradient was degraded most largely with the enzyme. Thus, graded structure of the blends promoted their biodegradabilities large. It was considered that the dissolution of PEO with water increased the surface area attacked by the enzyme, while PEO caught PLLA oligomers to promote the biodegradation of PLLA. Then, the biodegradabilities of the graded blends were suppressed by the increasing crystallinity of PLLA. Furthermore, the strengths of all the graded blends were larger than those of the isotropic blend. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2972–2981, 2007     

Cerasome as an Organic-Inorganic Vesicular Nanohybrid: Characterization of Cerasome-Forming Lipids having a Single or a Dual Trialkoxysilyl Head

Morphological characterization of the organic-inorganic vesicular nanohybrids, Cerasomes, was performed in aqueous media from two aspects. Firstly, a novel Cerasome-forming lipid having two triethoxysilyl groups in the head moiety was synthesized and the physical property of the Cerasome was investigated. While the morphological stability of the Cerasomes, as evaluated from the vesicular collapse behavior against a micelle-forming nonionic surfactant, Triton-X 100, was extremely higher than that of the conventional phospholipid liposome, the stabilities were comparable to each other for the Cerasomes derived from the dual- and single-head lipids. On the other hand, the surface property of the Cerasome formed with the dual-head lipid more closely resembled the colloidal silica particles rather than that derived from the single-head lipid, as suggested by zeta-potential measurements. Secondly, the effect of the media pH on the morphological stability of the Cerasome formed with the single-head lipid was evaluated and appeared as a time difference in obtaining the morphological stability of the Cerasome. These morphological characteristics of the Cerasomes could be mainly owing to the development of the siloxane network on the vesicular surface.     

Emanation Thermal Analysis of SiC Based Materials

Results of emanation thermal analysis (ETA) characterizing microstructure changes of SiC based materials during heat treatment in argon are demonstrated. This method made it possible to reveal fine changes of the texture of SiC nano-sized powders, SiC micro-sized powders and SiC whiskers under in situconditions of the heating. ETA curves can serve as fingerprints of the respective samples.This revised version was published online in November 2005 with corrections to the Cover Date.     

Photocatalysis of sprayed nitrogen-containing Fe2O3–ZnO and WO3–ZnO composite powders in gas-phase acetaldehyde decomposition

Two series of nano-sized N-containing MO_x–ZnO (M: Fe, W) composite powders were synthesized by spray pyrolysis. The nitrogen content was controlled from 500 to 2100 ppm by changing the powder ingredients and spray pyrolysis temperature. Ultraviolet-visible (UV-Vis) spectra indicated that the N-containing MO_x–ZnO powders absorbed not only ultraviolet light (λ<387 nm) like pure ZnO powder, but also part of visible light (λ<650 nm). Acetaldehyde decomposition was used as a probe reaction to evaluate the photocatalysis of these composite powders. The photocatalytic activity of the N-containing ZnO powder was pronouncedly enhanced by the WO₃ addition under both UV and visible-light irradiation. However, that of the N-containing ZnO powder was suppressed by the Fe₂O₃ addition. A model of the semiconductor energy-band structure is proposed to explain the enhancement and suppression of photocatalytic activity.     

Adsorption and reactions of NO on clean and CO-precovered Ir(111)

Adsorption and reactions of NO on clean and CO-precovered Ir(111) were investigated by means of X-ray photoelectron spectroscopy (XPS), high-resolution electron energy loss spectroscopy (HR-EELS), infrared reflection absorption spectroscopy (IRAS), and temperature-programmed desorption (TPD). Two NO adsorption states, indicative of fcc-hollow sites and atop sites, were present on the Ir(111) surface at saturation coverage. NO adsorbed on hollow sites dissociated to Na and Oa at temperatures above 283 K. The dissociated Na desorbed to form N2 by recombination of Na at 574 K and by a disproportionation reaction between atop-NO and Na at 471 K. Preadsorbed CO inhibited the adsorption of NO on atop sites, whereas adsorption on hollow sites was not affected by the coexistence of CO. The adsorbed CO reacted with dissociated Oa and desorbed as CO2 at 574 K.     

Nigellamines A3, A4, A5, and C, new dolabellane-type diterpene alkaloids, with lipid metabolism-promoting activities from the Egyptian medicinal food black cumin

New dolabellane-type diterpene alkaloids, nigellamines A(3), A(4), A(5), and C, were isolated from the methanolic extract of an Egyptian medicinal food, black cumin (the seeds of Nigella sativa). Their absolute configurations were determined on the basis of chemical and physicochemical evidence. Nigellamines were found to lower triglyceride levels in primary cultured mouse hepatocytes, and in particular, the activity of nigellamine A(5) was equivalent to that of the hypolipidemic agent, clofibrate.     

Origin of visible-light-driven photocatalysis: A comparative study on N/F-doped and N-F-codoped TiO2 powders by means of experimental characterizations and theoretical calculations

An overall comparative study was carried out on N-doped, F-doped, and N-F-codoped TiO₂ powders (NTO, FTO, NFTO) synthesized by spray pyrolysis in order to elucidate the origin of their visible-light-driven photocatalysis. The comparisons in their experimentally obtained characteristics were based on the analysis of XPS, UV-Vis, PL, NH₃-TPD and ESR spectra. The comparisons in their theoretically predicted properties were based on the analysis of the calculated electronic structures. As the results, N-doping into TiO₂ resulted in not only the improvement in visible-light absorption but also the creation of surface oxygen vacancies. F-doping produced several beneficial effects including the creation of surface oxygen vacancies, the enhancement of surface acidity and the increase of Ti³⁺ ions. Doped N atoms formed a localized energy state above the valence band of TiO₂, whereas doped F atoms themselves had no influence on the band structure. The photocatalytic tests indicated that the NFTO demonstrated the highest visible-light activity for decompositions of both acetaldehyde and trichloroethylene. This high activity was ascribed to a synergetic consequence of several beneficial effects induced by the N-F-codoping.     

Fluorine-doped TiO2 powders prepared by spray pyrolysis and their improved photocatalytic activity for decomposition of gas-phase acetaldehyde

F-doped TiO₂ (FTO) powders were synthesized by spray pyrolysis (SP) from an aqueous solution of H₂TiF₆. The resulting FTO powders possessed spherical particles with a rough surface morphology and a strong surface acidity. The fluorine concentrations in the FTO powders calculated from XPS spectra significantly depended on SP temperature and ranged from 2.76 to 9.40 at.%. The FTO powder prepared at SP temperature of 1173 K demonstrated the highest photocatalytic activity for the decomposition of gas-phase acetaldehyde under both ultraviolet (UV) and visible light (vis) irradiations, and it was higher than that of commercial P 25. This high photocatalytic activity was ascribed to several beneficial effects produced by F-doping: enhancement of surface acidity, creation of oxygen vacancies, and increase of active sites. It was interesting to point out that the vis photocatalytic activity of FTO powders was achieved by the creation of surface oxygen vacancies rather than the improvement of optical absorption property of bulk TiO₂ in vis region.     

Synthesis of tert-butyl-substituted poly (ether ketone) by nickel-catalyzed coupling polymerization of aromatic dichloride

tert-Butyl substituted poly (aryl ether ketone)s with relatively high molecular weights were prepared by the Ni-catalyzed polymerization of tert-butyl substituted aromatic dichlorides containing ether ketone unit. These polymers were amorphous and soluble in common organic solvents, such as THF, dichloromethane, and chloroform. De-tert-butylation of the polymer by the treatment of trifluoromethanesulfonic acid in the presence of toluene proceeded smoothly and produced crystalline poly (aryl ether ketone). © 1994 John Wiley & Sons, Inc.