Synthesis and Spectroscopic Study of Some New Phosphoramidates,Crystal Structures of N‐Benzoyl‐N′,N″‐bis(azetidinyl)phosphoric Triamide and N‐Benzoyl‐N′,N″‐bis(hexamethylenyl)phosphoric Triamide

Some new N‐carbonyl, phosphoramidates with formula C₆H₅C(O)N(H)P(O)R₂ (R = NC₃H₆ ( 1 ), NC₆H₁₂ ( 2 ), NHCH₂CH=CH₂ ( 3 ), N(C₃H₇)₂ ( 4 )) and CCl₃C(O)N(H)P(O)R′₂ (R′ = NC₃H₆ ( 5 ), NHCH₂CH=CH₂ ( 6 )) were synthesized and characterized by ¹H, ¹³C, ³¹P NMR and IR spectroscopy and elemental analysis. The structures were determined for compounds 1 and 2 . Compound 1 exists as two crystallographically independent molecules in crystal lattice. Both compounds 1 and 2 produced dimeric aggregates via intermolecular ‐P=O…H‐N‐ hydrogen bonds, which in compound 2 is a centrosymmetric dimer. In compounds with four‐membered ring amine groups, ³J(P,C)>²J(P,C), in agreement with our previous studies about five‐membered ring amine groups. Also, ³J(P,C) values in compounds 1 and 5 are greater than in compounds with five‐, six‐ and seven‐membered ring amine groups.     

Adsorptive Stripping Voltammetric Determination of Ultra Trace of Zinc and Lead with Carbidopa as Complexing Agent in Food and Water Samples

In the present work, the cathodic stripping voltammetric methodology using a hanging mercury drop electrode was described for simultaneous determination of lead and zinc in different real samples. The method is based on adsorption of metal ions on mercury electrode using carbidopa as a suitable complexing agent. The potential was scanned to the negative direction and the differential pulse stripping voltammograms were recorded. Optimal conditions were found to be: accumulation time; 70 s, accumulation potential; 50 mV versus Ag/AgCl, scan rate; 40 mV s^?1, supporting electrolyte; 0.01 M ammonia buffer at pH 8.5, and concentration of carbidopa; 8.0 μM. The relationship between the peak current versus concentration was linear over the range of 0.1–210 and 0.2–170 nM for lead and zinc, respectively. The detection limits are 0.09 and 0.15 nM for lead and zinc ions respectively. The relative standard deviations at a concentration level of 70 nM of both metal ions are found 1.08 and 1.24% for lead and zinc ions respectively.     

Retracted: A new class of copper(I) complexes with imine-containing chelators which show potent anticancer activity

Seven novel complexes (C₁–C₇) were synthesized by the interaction between Cu(I) metal cation, L₁, L₂, L₃, X and PPh₃, where L₁–L₃ are derivatives of ((pyridine-2-ylmethylene)amino)phenol imine ligands and X = Cl⁻, Br⁻, I⁻, NCS⁻. All the complexes were characterized using infrared, ¹H NMR and ³¹P NMR spectroscopies. The crystal structures of C₁–C₇ were also determined using single-crystal X-ray diffraction. The organization of the crystal structures and the intermolecular interactions are discussed. The supramolecular assemblies are driven by cooperative π…π interactions and hydrogen bonds, followed by CH…π linkages. The potential anticancer effect of C₁–C₇ was assessed for human glioblastoma cells using several anticancer experiments, which showed that these complexes have marked anticancer property against U87 cells. It was also found that the minimum and maximum anticancer effects are shown by C₃- and C₄-treated samples, respectively. Furthermore, theoretical approaches were used to investigate the nature of metal–ligand interactions which suggest a closed-shell and electrostatic character for Cu…N, Cu…P and Cu…X bonds.     

Determination of Tetracycline at a UV‐Irradiated DNA Film Modified Glassy Carbon Electrode

In this study, interaction of tetracycline (TC) and DNA in the Britton? Robinson buffer solution (BR) was studied by cyclic voltammetry. The experimental results reveal that TC can bind strongly to DNA and the association constant and binding number between TC and DNA was obtained. Then DNA was immobilized on a glassy carbon electrode by UV‐irradiation. Through this process, water‐soluble DNA was converted into insoluble materials, and a stable DNA film was formed on the electrode. The electrochemical oxidation behavior of TC was studied at UV‐irradiated DNA film modified glassy carbon electrode (UV‐DNA‐GCE). The response of modified electrode was optimized with respect to pH, accumulation time, ionic strength, drug concentration and other variables. TC at the surface of modified electrode showed a linear dynamic range of 0.30–90.00 µM and a detection limit of 0.27 µM. To demonstrate the applicability of the modified electrode, it was used for the analysis of real samples such as pharmaceutical formulations and milk.     

Simultaneous Voltammetric Determination of Captopril and Hydrochlorothiazide on a Graphene/Ferrocene Composite Carbon Paste Electrode

In this work, a voltammetric method has been developed for the simultaneous determination of captopril (CPT) and hydrochlorothiazide (HCT) in pharmaceutical combinations and clinical samples using a graphene/ferrocene composite carbon paste (GR/Fc/CP) electrode. The electrochemical behaviors of CPT and HCT were individually and simultaneously investigated at the surface of the GR/Fc/CP electrode. In differential pulse voltammetric (DPV) mode and under optimized experimental conditions, CPT and HCT gave linear responses over the concentration ranges 1.0–430 µM and 0.5–390 µM (r²>0.99), respectively. The prepared electrode could be used for simultaneous determination of CPT and HCT in some real samples.     

Fluorisocyanat (F?NCO) – eine reaktive Zwischenstufe

Fluorine Isocyanate (F? NCO) – a Reactive Intermediate Fluorine isocyanate, produced in four different ways, reacts to the compounds NF₂C(O)NCO, FC(O)NCO, NF₂C(O)F, and COF₂in various molar ratios. Even in the gas phase at p <0.1 mbar and 20°C FNCO is not stable. So, in the family of covalent isocyanates, the fluorine compound is the most reactive one. In contrast to other isocyanates, FNCO dimerizes to NF₂C(O)NCO exclusively. The properties of NF₂C(O)NCO have been reinvestigated.     

A Hexagonally Ordered Nanoporous Silica-Based Fiber Coating for SPME of Polycyclic Aromatic Hydrocarbons from Water Followed by GC–MS

A highly porous fiber coating material was prepared and functionalized with 3-amino propyl triethoxysilane (APTES) on hexagonally ordered nanoporous silica (SBA-15). Applicability of this coating was assessed employing a laboratory made solid-phase microextraction (SPME) device and gas chromatography–mass spectrometry for the simultaneous sampling and determination of trace polycyclic aromatic hydrocarbons (PAHs) from aqueous sample solutions. A one at the time optimization strategy was applied to investigate and optimize important extraction parameters such as extraction temperature, extraction time, ionic strength and sonication time. In the optimum conditions, the relative standard deviations for deionized water, spiked with selected PAHs were between 3.3 and 7.7% (n = 3), and detection limits for the studied compounds were 4.2 and 26.1 pg mL⁻¹. No significant change was observed in the extraction efficiency of the new SPME fiber, over 50 extractions. The proposed method was successfully applied to the extraction and determination of PAHs in the waste water samples.

     

A novel surface cleaning method for chemical removal of fouling lead layer from chromium surfaces

Most products especially metallic surfaces require cleaning treatment to remove surface contaminations that remain after processing or usage. Lead fouling is a general problem which arises from lead fouling on the chromium surfaces of bores and other interior parts of systems which have interaction with metallic lead in high temperatures and pressures. In this study, a novel chemical solution was introduced as a cleaner reagent for removing metallic lead pollution, as a fouling metal, from chromium surfaces. The cleaner aqueous solution contains hydrogen peroxide (H₂O₂) as oxidizing agent of lead layer on the chromium surface and acetic acid (CH₃COOH) as chelating agent of lead ions. The effect of some experimental parameters such as acetic acid concentration, hydrogen peroxide concentration and temperature of the cleaner solution during the operation on the efficiency of lead cleaning procedure was investigated. The results of scanning electron microscopy (SEM) showed that using this procedure, the lead pollution layer could be completely removed from real chromium surfaces without corrosion of the original surface. Finally, the optimum conditions for the complete and fast removing of lead pollution layer from chromium surfaces were proposed. The experimental results showed that at the optimum condition (acetic acid concentration 28% (V/V), hydrogen peroxide 8% (V/V) and temperature 35 °C), only 15-min time is needed for complete removal of 3 g fouling lead from a chromium surface.