Toxicity of Zn-Fe Layered Double Hydroxide to Different Organisms in the Aquatic Environment

The application of layered double hydroxide (LDH) nanomaterials as catalysts has attracted great interest due to their unique structural features. It also triggered the need to study their fate and behavior in the aquatic environment. In the present study, Zn-Fe nanolayered double hydroxides (Zn-Fe LDHs) were synthesized using a co-precipitation method and characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), and nitrogen adsorption-desorption analyses. The toxicity of the home-made Zn-Fe LDHs catalyst was examined by employing a variety of aquatic organisms from different trophic levels, namely the marine photobacterium Vibrio fischeri, the freshwater microalga Pseudokirchneriella subcapitata, the freshwater crustacean Daphnia magna, and the duckweed Spirodela polyrhiza. From the experimental results, it was evident that the acute toxicity of the catalyst depended on the exposure time and type of selected test organism. Zn-Fe LDHs toxicity was also affected by its physical state in suspension, chemical composition, as well as interaction with the bioassay test medium.     

Photocatalytic ozonation for degradation of 2-sec-butyl-4,6-dinitrophenol (DNBP) using titanium dioxide: effect of operational parameters and wastewater treatment

The results of degradation efficiency of 2-sec-butyl-4,6-dinitrophenol (DNBP) in a batch system by various advanced oxidation processes revealed the order of TiO₂/UV/O₃ > TiO₂/O₃ > UV/O₃ > O₃ > UV/TiO₂. All processes followed pseudo-first order kinetics. The influence of operational parameters such as initial pH, initial concentration of DNBP, ozone and catalyst dosage on the TiO₂/UV/O₃ process, which was the most significant investigated method. The ozone dosage was found to have the noticeable impact on the process; however, initial pH and TiO₂ dosage were less effective. The mineralization of 40 mg/L of DNBP and petrochemical wastewater under the obtained optimal conditions was monitored by total organic carbon and chemical oxygen demand, respectively. The results demonstrated that the TiO₂/UV/O₃ process was a very effective method for degradation and mineralization of DNBP in aqueous solutions and industrial wastewater. The degradation intermediates were identified by GC–MS.     

Response surface optimization of heterogeneous Fenton-like degradation of sulfasalazine using Fe-impregnated clinoptilolite nanorods prepared by Ar-plasma

Research on Chemical Intermediates - Optimization of sulfasalazine degradation using the heterogeneous Fenton-like process in batch mode was investigated by response surface methodology. The...     

Fluidized-bed Fenton-like oxidation of a textile dye using natural magnetite

Degradation of Acid Orange 7 (AO7) as a model azo dye was investigated in a recirculating pilot fluidized-bed reactor by a Fenton-like process using natural magnetite (NM) and potassium persulfate (K₂S₂O₈). Scanning electron microscopy was performed to characterize the magnetite sample. The heterogeneous Fenton-like process (NM/\({\text{S}}_{2} {\text{O}}_{8}^{2 - }\)) is a modified method owing to its enhanced mass transfer. It can be operated reliably and simply by reducing the produced iron oxide sludge in the conventional Fenton process. Degradation efficiency (DE %) of AO7 by NM/ \({\text{S}}_{2} {\text{O}}_{8}^{2 - }\) process was affected by operational parameters. The DE % of 75 % was obtained for the AO7 treatment (15 mg/L) at the desired conditions, such as pH 5, 0.2 mM \({\text{S}}_{2} {\text{O}}_{8}^{2 - }\), and 0.5 g/L NM after 120 min of reaction time. The dye degradation rate in all the experiments followed the pseudo-second-order kinetic with high correlation coefficients (R ² ≥ 0.98). The low released iron concentration, successive reusability at milder pH and the recirculation mode with the proper mixing are the significant advantages of the NM/\({\text{S}}_{2} {\text{O}}_{8}^{2 - }\) process.     

Electrochemical and photo-assisted electrochemical treatment of the pesticide imidacloprid in aqueous solution by the Fenton process: effect of operational parameters

Research on Chemical Intermediates - The aim of this study was to compare the degradation efficiency (DE%) of imidacloprid as a model pesticide by electro-Fenton (EF) and photoelectro-Fenton...     

Hydrothermal synthesis of a nano-rod mercury(ii) metal-ligand coordination compound

A novel nano-rod mercury(II) coordination compound [Hg (BINH)I₂] (1), (BINH is the abbreviation of benzylideneisonicotinohydrazide) is synthesized by a hydrothermal method that produces the coordination compound at a nanosize level. The new nanostructure is characterized by scanning electron microscopy, powder X-ray diffraction, elemental analysis, and IR spectroscopy. Compound 1 was structurally characterized by single crystal X-ray diffraction and the single-crystal structure of this complex shows that each mercury(II) center is four-coordinated with two N-donor atoms from tow BINH ligands and tow iodo anions. Self-assembly of this complexes is pereformed by CH?I and π-π stacking interactions. The supramolecular features in these complexes are controlled by weak directional intermolecular interactions.     

Hydrothermal synthesis and characterization of Nd-doped ZnSe nanoparticles with enhanced visible light photocatalytic activity

In the present study, Nd³⁺-doped ZnSe nanoparticles with variable Nd contents were successfully synthesized via a hydrothermal process using Neodymium (III) chloride hexahydrate as the doping source. X-ray diffraction, UV–Vis diffuse reflectance spectroscopy (DRS), scanning electron microscopy and transmission electron microscopy were used for characterization of the synthesized nanoparticles. It was confirmed by the DRS analysis that both of the undoped and Nd-doped ZnSe samples had significant optical absorption in the visible light range. The photocatalytic performance of as-synthesized nanoparticles was investigated towards the decolorization of C. I. Acid Orange 7 solution under visible light irradiation. Results indicated that the loading of Nd dopant into ZnSe nanoparticles significantly enhanced the photocatalytic activity of pure ZnSe with increasing Nd loading up to 6 mol% (color removal efficiency of 24.31 % for ZnSe and 84.20 % for Nd_0.06Zn_0.94Se after 120 min of treatment) and then the photocatalytic activity began to decrease.     

Modeling and optimization of simultaneous photocatalysis of three dyes on ceramic-coated TiO2 nanoparticles using chemometrics methods: phytotoxicological assessment during degradation process

In this paper, ceramic plates were used as a support of TiO₂ nanoparticles for photocatalytic decolorization of a mixture of three dyes. The three textile dyes (C.I. Basic Red 46, C.I. Basic Blue 3 and Malachite Green) were quantified simultaneously during the photocatalytic degradation process. The partial least squares modeling was successfully applied for the multivariate calibration of the spectrophotometric data. Also, the central composite design has been applied to the optimization of photocatalytic decolorization of the dye solution containing three dyes using an immobilized UV/TiO₂ process. The optimum initial concentration of three dyes, reaction time, and UV light intensity were found to be 5 mg/L, 240 min, and 47.2 W/m², respectively. The chronic phytotoxicity of mixture of dyes was evaluated using aquatic species Spirodela polyrhiza (S. polyrhiza) prior to and after photocatalysis. The phytotoxicity results revealed that the photocatalysis process could effectively reduce the phytotoxicity of the dyes from their aqueous solutions.     

UV-assisted synthesis of reduced graphene oxide–ZnO nanorod composites immobilized on Zn foil with enhanced photocatalytic performance

Research on Chemical Intermediates - ZnO nanorods were hydrothermally grown on Zn foil in an alkaline solution and the immobilized nanorods were subsequently hybridized with reduced graphene oxide...     

Direct Solar Charging of an Organic–Inorganic,Stable, and Aqueous Alkaline Redox Flow Battery with a Hematite Photoanode

The intermittent nature of the sunlight and its increasing contribution to electricity generation is fostering the energy storage research. Direct solar charging of an auspicious type of redox flow battery could make solar energy directly and efficiently dispatchable. The first solar aqueous alkaline redox flow battery using low cost and environmentally safe materials is demonstrated. The electrolytes consist of the redox couples ferrocyanide and anthraquinone‐2,7‐disulphonate in sodium hydroxide solution, yielding a standard cell potential of 0.74 V. Photovoltage enhancement strategies are demonstrated for the ferrocyanide‐hematite junction by employing an annealing treatment and growing a layer of a conductive polyaniline polymer on the electrode surface, which decreases electron–hole recombination.