Determination of percolation threshold electroactivity and phase behavior study on conducting blends of thermotropic polyesters and polyaniline

The new thermotropic polyester/polyaniline (PIn/PAni) blends have been prepared by solution blend of synthesized liquid crystalline poly[4,4′‐bis (ω‐alkoxy) biphenylisophthalate]s having four and six methylene units in spacer (PI4 and PI6) with PAni doped with camphorsolfonic acid (CSA). The percolation threshold electroactivity of prepared blend films has been determined by cyclic voltammetry. The effect of the PAni concentration, solvent nature and polyester structure on the electroactivity of the blends has been investigated. The extremely low percolation threshold of prepared PIn/PAni‐CSA blends from dimethylformamide (DMF) and m‐cresol solution was 3% weight of PAni‐CSA. The amount of conducting polymer necessary to retard the formation of the liquid crystalline (LC) phase is up to 45% by weight. Phase behavior studies by differential scanning calorimetry and polarizing microscopy show that blends with 45% of conducting polymer are both liquid crystal and conductive. The morphology of the blends has been investigated by scanning electron microscopy. Copyright © 2004 John Wiley & Sons, Ltd.     

Thermotropic polyesters. 1: Synthesis, characterization and thermal transition of poly[4,4-bis(ω-alkoxy)biphenyl isophthalate]

A new homologous series of thermotropic polyesters has been synthesized by polycondensation reaction between isophthaloyl chloride and mesogenic diols 4,4^′-bis(ω-hydroxyalkoxy)biphenyl in which the spacer length is varied from 3 to 6 methylene units. The thermal behavior of the polymers has been characterized using polarized light microscopy and differential scanning calorimetry (DSC). The odd members exhibit a smectic C (S_C) phase in a narrow temperature interval, while the even members form a smectic A (S_A) phase in a broader temperature range. All of the obtained compounds were characterized by conventional spectroscopic methods.     

Characterization of gelatin/cellulose acetate nanofibrous scaffolds: Prediction and optimization by response surface methodology and artificial neural networks

Gelatin/cellulose acetate electrospun nanofibers are a good candidates for simulation of extracellular matrix (ECM). Electrospinning of the blend is controlled by many parameters such as applied voltage, gap distance, solvent composition, polymer composition and solution concentration. The individual and interactive effects of these parameters on pH, electrical conductivity (EC) and viscosity of solutions, and diameter and quality of fibers were investigated. Response surface methodology (RSM) and artificial neural networks (ANNs) were considered to model and optimize the responses. EC, pH and viscosity of solutions were dependent on the solution parameters. The solvent composition and solution concentration had an influence on the fiber diameter and quality. The optimum conditions for fabricating qualified nanofibers with minimum diameter were 16.9 kV, 15.3 cm, 77.5 wt % of gelatin, 88.9 vol % of acetic acid and solution concentration of 20 wt %/vol %. Uniform beadless nanofibers with a diameter of 284 nm were attained at this optimum condition.     

Thermotropic polyesters. 2: Synthesis, characterization and thermal transitions of copolyesters containing 4,4′-bis (ω-alkyloxy) biphenyl isophthalate units

Thermotropic copolyesters containing an isophthalate unit and mesogenic 4, 4′-bis (ω-hydroxyalkyloxy) biphenyls (n = 3, 4, 6) with different numbers of methylene units have been synthesized by melt polymerization. The number-average molar mass (M_n) was estimated from end group analysis by ¹H NMR. The copolymer compositions were also obtained from ¹H NMR. The thermal behavior of the copolymers containing even-even (n = 4, 6) and odd-even (n = 3, 4) pairings has been investigated and is also compared with that of the analogous homopolymers. The copolymers exhibit reduced melting point and extending liquid crystalline range identified using polarizing microscopy and DSC. All of the obtained compounds were characterized by conventional spectroscopic methods.     

Fabrication of tapers with Gaussian refractive-index profile in azo polymers

We have fabricated a refractive-index-tapered waveguide by exposing an azo polymer film to a 532-nm wavelength laser beam focused to about 60-μm spot size at the film with no surface deformation. The converging ability of the taper (ability to increase intensity along the taper) was measured to be 5 db/cm while the loss was 0.39 db/cm. According to the data obtained, the power density increases along the taper while loss is nearly constant along the tapered and non-tapered segments.     

InAs/GaSb strained layer superlattice detectors with nBn design

We have investigated the electrical and optical properties of an nBn based Type-II InAs/GaSb strained layer superlattice detector as a function of absorber region background carrier concentration. Temperature-dependent dark current, responsivity and detectivity were measured. At T = 77 K and V_b = 0.1 V, with two orders of magnitude change in doping concentration, the dark current density increased from ～0.3 mA/cm² to ～0.3 A/cm². We attribute this to a depletion region that exists at the AlGaSb barrier and the SLS absorber interface. The device with non-intentionally doped absorption region demonstrated the lowest dark current density (0.3 mA/cm² at 0.1 V) with a specific detectivity D¹ at zero bias equal to 1.2 × 10¹¹ Jones at 77 K. The D¹ value decreased to 6 × 10¹⁰ cm Hz^1/2/W at 150 K. This temperature dependence is significantly different from conventional PIN diodes, in which the D¹ decreases by over two orders of magnitude from 77 K to 150 K, making nBn devices a promising alternative for higher operating temperatures.     

Physical stability of oil-in-water emulsions in the presence of gamma irradiated gum tragacanth

Gum tragacanth (GT) exuding from an Iranian Astragalus species was γ-irradiated at 0, 0.75, 1.5, 3, 5, 7, and 10?kGy and used to stabilize a model oil-in-water emulsion system. Stability and physicochemical properties of emulsion samples were investigated with respect to the effect of irradiation treatment on functional properties of gum tragacanth. Particle size distribution, interfacial tension, zeta potential, steady shear, and oscillatory rheological measurements were used to characterize and evaluate the emulsion samples and obtain more information about the possible stability mechanism. Emulsions were prepared by homogenizing 10% w/w sun flower oil with 90% w/w aqueous gum dispersions and stored quiescently at 25°C for 120 days. The results indicated that using 1.5?kGy irradiated GT was more effective in providing optimum values of apparent viscosity, number mean diameter, electrosteric repulsion, and structure strength for getting the maximum emulsion stability. GT significantly reduced the interfacial tension of the oil and water system, but no significant differences were observed among all irradiation treated and non-irradiated samples. This study revealed that GT acts as a bifunctional emulsifier and irradiation treatment has a great positive influence on its ability to reduce droplets’ collision frequency and stabilize the oil-in-water emulsion.     

Application of the BASNEF Model in Safety Training in Automobile Manufacturing Plants

After controls, including engineering and management, the final way to control noise is to use hearing protection devices. Due to the lack of a standardized questionnaire regarding investigating workers’ use of hearing protection devices on the basis of the BASNEF behavioral model, the present study was conducted to investigate the effect of health education based on the BASNEF model on the use of hearing protection devices in workers of an automobile manufacturing plant in Iran. This quasi-experimental and prospective intervention study was performed on 80 workers at an automobile manufacturing plant who are exposed to noise levels above 85 decibels and do not use hearing protection devices. In this study, 40 people working in a cast iron foundry were selected as the intervention group, and 40 working in aluminum casting were chosen as the control group. Questionnaires were analyzed at the beginning of the intervention and three months after the intervention in the intervention and control groups. There was no significant difference between the intervention and control groups before the intervention. There was a significant difference between the intervention and control groups after the intervention in the area of knowledge. A significant correlation was observed between the intervention and control groups after the intervention program in all areas of the BASNEF educational model except behavioral intention. In this study, the effect of educational intervention on the use of hearing protection devices was investigated, and with the educational intervention, it was tried to get help from influential people and enabling factors in education based on the BASNEF model. The results showed that the educational intervention based on the BASNEF model can improve the knowledge of individuals in both the intervention and control groups.