Interference of Humic Substances in the Spectrophotometric Determination of Bromate by Phenothiazines in Natural Waters

Abstract

The spectrophotometric method of bromate (BrO₃ ^?) determination by phenothiazines was applied to natural water samples and the interferences due to the presence of inorganic and humic substances were investigated. Common ions present in natural waters did not interfere and only the less abundant NO₂ ^? and Fe²⁺ exhibited strong interferences. Interferences of the two latter ions, if they existed, could be controlled and the method proved to be accurate and with a low detection limit. However, it was found that the presence of soluble humic substances resulted in positive interference, rendering the method unsuitable for bromate determination in natural waters and restricted its use in pure bromate solutions. This interference can be attributed to the electron acceptor groups invariably existing in the humic molecules. Since humic substances can remain in the water even after its ozonation, they will also contribute to a positive interference in bromate determination in potable waters.     

NMR and theoretical investigations on the structures and dynamics of octahedral bis(chelate)dichloro V(III) compounds isolated by an unusual reduction of non-oxo V(IV) species

Reaction of the non-oxo V(IV) species [V(IV)Cl(2)(L(OO))(2)] [L(OO) = acetylacetonate (acac(-)) or benzoylacetonate (bzac(-))] with a chelate nitrogen-donor ligand L(NN) in acetonitrile leads to the reduction of V(IV) to V(III) and the formation of the mononuclear V(III) compounds of the general formula [V(III)Cl(2)(L(OO))(L(NN))] (L(OO) and L(NN) are acac(-) and bipy for 1; acac- and 5,5'-me(2)bipy for 2; acac(-) and 4,4'-tb(2)bipy for 3; acac(-) and phen for 4; bzac(-) and bipy for 5; bzac(-) and phen for 6). The reduction of the V(IV) complexes was monitored by GC-MS and (1)H NMR spectroscopy. Both one- and two-dimensional (2D COSY and 2D EXSY) (1)H NMR techniques were used to assign the observed (1)H NMR resonances of 1-6 in CD(2)Cl(2) or CDCl(3) solution. It appeared that in solution these V(III) complexes form two isomers which are in equilibrium: cis-[V(III)Cl(2)(L(OO))(L(NN))] <==> trans-[V(III)Cl(2)(L(OO))(L(NN))]. 2D EXSY cross-peaks were clearly observed between bipy- and acac-hydrogen atoms of the two geometrical isomers of 1-3 as well as between bipy and acac(-) protons of the cis isomer, indicating a dynamic process that corresponds to cis-trans isomerization and a cis-cis racemization. The thermodynamic and kinetic parameters of the equilibrium between these two isomers were calculated for compounds 1 and 2 by using variable temperature (VT) NMR data. Both cis-trans isomerization and cis-cis racemization processes probably proceed with an intramolecular twist mechanism involving a trigonal prismatic transition state. Density functional calculations (DFT) also indicated such a rearrangement mechanism.     

A phase I, randomized study of combined IL-2 and therapeutic immunisation with antiretroviral therapy

Background  

Fully functional HIV-1-specific CD8 and CD4 effector T-cell responses are vital to the containment of viral activity and disease progression. These responses are lacking in HIV-1-infected patients with progressive disease. We attempted to augment fully functional HIV-1-specific CD8 and CD4 effector T-cell responses in patients with advanced chronic HIV-1 infection.     

Finite element modelling of surface waves in a channel

A variational formulation of the vertically-integrated differential equations for free surface wave motion is presented. A finite element model is derived for solving this nonlinear system of hydrodynamic equations. The time integration scheme employed is discussed and the results obtained demonstrate its good stability and accuracy.Several applications of the model are considered: the first problem is an open channel of uniform depth and the second an open channel of linearly varying depth. The ‘inflow’ boundary condition is prescribed in terms of the velocity which represents a wavemaker and/or a flow source, while the ‘outflow’ boundary condition is specified in terms of the water elevation. The outflow condition is adjusted for two cases, a reflecting boundary (finite channel) and a non-reflecting boundary (open-ended channel). The latter boundary condition is examined in some detail and the results obtained show that the numerical model can produce the non-reflecting boundary that is similar to the analytical radiation condition for waves. Computational results for a third problem, involving wave reflection from a submerged cylinder, are also presented and compared with both experimental data and analytical predictions.The simplicity and the performance of the computational model suggest that free surface waves can be simulated without excessively complicated numerical schemes. The ability of the model to simulate outflow boundary conditions properly is of special importance since these conditions present serious problems for many numerical algorithms.     

Mechanism for CuPt-type ordering in mixed III–V epitaxial layers

A model is proposed to rationalize the occurence of CuPt-type ordering in mixed III–V epitaxial layers grown on (001) substrates. It is invoked that 2× surface reconstruction occuring on group V terminated (001) surfaces produces dilated and compressed regions in sub-surface layers. The presence of these regions biases the occupation of certain sites during the growth of a layer consisting of atoms differing in their tetrahedral radii. By assuming that the reconstruction always occurs at the growing surface, it is possible to explain the evolution of CuPt-type ordering in epitaxial layers. Also, based on the model, experimental observations pertaining to the influence of growth conditions, surface misorientation and steps on ordering can be rationalized.     

Monolayer properties of surface-active metalorganic complexes with a tunable headgroup

Surface-active metalorganic complexes can be used to construct organic thin films with excellent electronic and catalytic properties. We have recently introduced a new versatile surface-active ligand, which can efficiently coordinate a wide range of transition metals. In the present work we report an investigation of Langmuir monolayers of V V, Mo VI and Ti IV complexes of this ligand, using surface pressure-area isotherms, Brewster-angle microscopy, and Grazing incidence X-ray diffraction. The monolayers of these complexes are stable enough over broad temperature ranges to allow efficient transfer to solid substrates.     

Polyoxomolybdenum(V/VI)-sulfite compounds: synthesis, structural, and physical studies

Reaction of Na(2)Mo(VI)O(4) x 2H(2)O with (NH(4))(2)SO(3) in the mixed-solvent system H(2)O/CH(3)CN (pH = 5) resulted in the formation of the tetranuclear cluster (NH(4))(4)[Mo(4)(VI)SO(16)] x H(2)O (1), while the same reaction in acidic aqueous solution (pH = 5) yielded (NH(4))(4)[Mo(5)(VI)S(2)O(21)] x 3H(2)O (2). Compound {(H(2)bipy)(2)[Mo(5)(VI)S(2)O(21)] x H(2)O}(x) (3) was obtained from the reaction of aqueous acidic solution of Na(2)Mo(VI)O(4) x 2H(2)O with (NH(4))(2)SO(3) (pH = 2.5) and 4,4'-bipyridine (4,4'-bipy). The mixed metal/sulfite species (NH(4))(7)[Co(III)(Mo(2)(V)O(4))(NH(3))(SO(3))(6)] x 4H(2)O (4) was synthesized by reacting Na(2)Mo(VI)O(4) x 2H(2)O with CoCl(2) x 6H(2)O and (NH(4))(2)SO(3) with precise control of pH (5.3) through a redox reaction. The X-ray crystal structures of compounds 1, 2, and 4 were determined. The structure of compound 1 consists of a ring of four alternately face- and edge-sharing Mo(VI)O(6) octahedra capped by the trigonal pyramidal sulfite anion, while at the base of the Mo(4) ring is an oxo group which is asymmetrically shared by all four molybdenum atoms. Compound 3 is based on the Strandberg-type heteropolyion [Mo(5)(VI)S(2)O(21)](4-), and these coordinatively saturated clusters are joined by diprotonated 4,4'-H(2)bipy(2+) through strong hydrogen bonds. Compound 3 crystallizes in the chiral space group C2. The structure of compound 4 consists of a novel trinuclear [Co(III)Mo(2)(V)SO(3)(2-)] cluster. The chiral compound 3 exhibits nonlinear optical (NLO) and photoluminescence properties. The assignment of the sulfite bands in the IR spectrum of 4 has been carried out by density functional calculations. The cobalt in 4 is a d(6) octahedral low-spin metal atom as it was evidenced by magnetic susceptibility measurements, cw EPR, BVS, and DFT calculations. The IR and solid-state UV-vis spectra as well as the thermogravimetric analyses of compounds 1-4 are also reported.