Die Hydrolyse von Phospholinsäureamiden

Hydrolysis of Amides of Phospholinic Acid The acid catalysed hydrolysis of (= OAP, R = organic substituent) has been investigated kinetically. Provided the pH remains constant, the hydrolysis is a first order reaction. From the temperature dependance of the rate constant the activation energy E_a as well as the thermodynamic data ΔH* and ΔS* have been calculated. In comparison to the compound with R = H aromatic substituents and additional the t-butyl group enhance E_a whilst aliphatic substituents included the benzyl group diminish E_a. The first step of the reaction is a protonation at the oxygen or nitrogen resulting in the formation of an equilibrium. After the determination of the basicity constant K_A of some OAPs it was possible to calculate the respective rate constants of the rate determining step of the reactions and the corresponding thermodynamic data E_F, ΔH and ΔS. It is assumed that the mechanism of the hydrolysis takes place according to the same scheme which has been assumed for the hydrolysis of cyclic esters of the phosphinic acid by Ugi [1] and colaborators.     

A high precision spectrophotometric method for on-line shipboard seawater pH measurements: the automated marine pH sensor (AMpS)

Measurement strategies for understanding the oceanic CO(2) (carbon dioxide) system are moving towards in situ and ship of opportunity sampling techniques. Automated instrumentation with high accuracy and sampling frequencies will enable a greater understanding of the fluxes of marine carbon and lead to a more reliable constrain on the calculated uptake of anthropogenic CO(2) by the oceans. This paper describes the automated marine pH sensor (AMpS); new instrumentation and methodology for the determination of seawater pH using dual spectrophotometric measurements of sulfonephthalein indicator in a semi-continuous seawater stream. The pH values measured during a recent study in the Weddell Sea are used to illustrate the excellent properties of the AMpS. The method has an on-line precision of better than 0.001 pH units and an estimated accuracy of better than 0.004 pH units. The instrument is compact, portable and has a measurement frequency of 20 samples per hour. The instrument is ideally suitable for operation on ships of opportunity.     

INVESTIGATION INTO THE SPECTROSCOPY AND PHOTOISOMERIZATION OF A SERIES OF POLY (ETHYLENE GLYCOL) PEPTIDE SCHIFF BASES OF 11-cis RETINAL

Abstract— The 11-cis and all-trans isomers of a series of poly(ethylene glycol)-oligopeptide - Schiff bases as models for rhodopsin were synthesized and studied. Absorption data for certain of the PEG-peptide Schiff bases demonstrated that no intramolecular hydrogen-bonding (or protonation) occurs between the Schiff base and an acidic amino acid residue, as was previously thought. Photoisomerization of the 11-cis protonated and unprotonated Schiff bases were examined using both steady state and laser flash techniques. Also with 355 nm excitation (and additionally 532 nm in one case), an approximate 40% increase in quantum yield of isomerization (φ) occurred for all protonated PEG-peptide Schiff bases compared to the H⁺-n-butylamine counterparts (in methanol). In one case, a > 100% increase in φ was found in dichloromethane. These data show that PEG-oligopeptide Schiff bases are still further improved models for rhodopsin compared to their n-butylamine analogs.     

The Formation of Porous Membranes by Filtration of Aerosol Nanoparticles

Flame-generated aerosol particles of Al₂O₃ were deposited by gas filtration on two types of porous and ceramic tubes of -Al₂O₃ with mean pore diameters of 450 and 2700nm, respectively. The particles were aggregates with average mobility diameters in the range of 30–100nm and primary particle diameters of 4–8nm. The particles are characterized by differential mobility analysis, transmission electron microscopy, and by their specific surface area. The deposited membranes are characterized by gas permeability measurements, scanning electron microscopy, and by their pore size distribution from nitrogen capillary condensation. The particles form a distinct, homogeneous membrane layer with a porosity of 90% on top of the substrate surface and only penetrate slightly into the substrate structure. The mean pore sizes of the deposited membranes determined by nitrogen condensation agree approximately with those determined by gas permeation and the specific surface area. The mean pore diameter varies in the range of 30–70nm. The gas permeability of the deposited membranes is related to the specific surface area but influenced by the high porosity. The mean pore size and the permeability of the membranes are almost independent of the substrate structure.The development of a membrane with uniform properties is preceded by a short initial period in which the deposited particles, with an equivalent membrane thickness of roughly 2m, have a significantly lower permeability than the ultimately developed uniform membrane layer. This effect is particularly significant for the aerosol particles with the lowest mean size, probably due to particles deposited in the pore mouths of the substrate.The particles and the deposited membranes are X-ray amorphous but retain their specific surface area on heating to even high temperatures. When the membranes are heated to 1473K for 10h, X-ray diffraction shows a mixture of - and -alumina, accompanied by a partial disintegration of the membrane and a considerable loss of surface area.     

Stability of domoic acid in saline dosing solutions

Studies designed to assess the effects of repeated low doses of domoic acid require an assessment of its stability in solution under the conditions used for in vivo studies. The stability of 1 mg/mL solutions of domoic acid in saline, with or without ascorbic acid, was determined for 15 weeks. Solutions were refrigerated, but warmed to room temperature for several hours each working day to simulate conditions of actual use. The solutions of domoic acid showed no evidence of decomposition as evidenced by stability of UV absorbance spectrum, concentration of domoic acid as determined by a liquid chromatographic method, and the chromatographic elution pattern. The addition of ascorbate to the domoic acid/saline solution did not alter the stability, but was deemed unnecessary because of the firm stability of the domoic acid/saline solution.     

Detection of myocardial viability by low-dose dobutamine Cine MR imaging

The purpose of this work was to test the diagnostic value of dobutamine stress magnetic resonance imaging (MRI) for predicting recovery of regional myocardial contractility after revascularization. Cardiac wall motion abnormalities are due to either non-viable and/or scarred, or viable, but hibernating, myocardial tissue. Dobutamine stress leads to increased systolic wall thickening only in viable myocardium. Twenty-five patients with akinetic or dyskinetic myocardial regions were examined with a Cine FLASH-2D sequence at rest and during dobutamine stress (10 μg/kg/min). Patients were re-examined at rest 3, and in case of persisting wall motion defects, 6 months after revascularization. Criterion of viability was increasing end-systolic wall thickening during stress and/or at follow-up. Akinetic regions related either to the LAD (n = 19) or to the RCA (n = 6) were judged viable if >=50% of the affected segments improved. MR studies were completed in all subjects without arrhythmia or need for early terminations due to symptoms. Sensitivity, specificity, and positive predictive value for the prediction of myocardial viability were 61%, 90%, and 87% for the segment-related analysis, and 76%, 100%, and 100% for the patient-related analysis based on coronary artery distribution, respectively. Dobutamine stress MRI allows to predict global functional recovery of akinetic myocardial regions after revascularization with a high positive predictive value and high specificity.     

Stringent tests of shell model calculations in fp shell nuclei (46, 48)Ti and (50,52)Cr from measurements of g factors and B(E2) values

Measurements of magnetic moments and lifetimes of 2(+)(1) and 4(+)(1) states of (46,48)Ti and (50,52)Cr were performed with high accuracy via projectile Coulomb excitation and the technique of transient magnetic fields. The high quality of the data allows for the first time to establish stringent constraints on large scale shell model calculations. Whereas the global behavior of the data is well explained by full fp shell model calculations, distinct deviations in the g factors and B(E2) values of (46,48)Ti from theoretical predictions can be attributed to excitations of the 40Ca core. This suggestion is supported by recent Monte Carlo calculations which provide evidence that 48Ca is a better inert core.     

An NMR thermometer for cryogenic magic-angle spinning NMR: the spin-lattice relaxation of (127)I in cesium iodide

The accurate temperature measurement of solid samples under magic-angle spinning (MAS) is difficult in the cryogenic regime. It has been demonstrated by Thurber et al. (J. Magn. Reson., 196 (2009) 84-87) [10] that the temperature dependent spin-lattice relaxation time constant of ⁷⁹Br in KBr powder can be useful for measuring sample temperature under MAS over a wide temperature range (20–296 K). However the value of T₁ exceeds 3 min at temperatures below 20 K, which is inconveniently long. In this communication, we show that the spin-lattice relaxation time constant of ¹²⁷I in CsI powder can be used to accurately measure sample temperature under MAS within a reasonable experimental time down to 10 K.