Indirect Methods For Determination of The Protective Effects of Coating Films on The Surface of Crystals

The extents of the protective effects of coating films on the surface of crystals were determined. Three different samples were made with different quantities of coating fluid (Sepifilm LP 010 in 10% aqueous solution). Since the atomizing rate was constant, the coating time increased in parallel with the volume of coating fluid applied. The direct measurement of film thickness and smoothness is very difficult, and therefore indirect methods were used. Dimenhydrinate was chosen as model drug; this is a heat-sensitive antihistamine with a low melting point. This temperature can be reached during the tableting process. The behaviour of samples on exposure to heat was examined by differential scanning calorimetry. The water uptakes of the samples were determined with an Enslin apparatus. Plasticity was studied with an instrumented tablet machine. These indirect methods (thermal conductivity, water uptake and plasticity measurements) revealed connections between the results of the various experiments. An overlong coating time decreased the protective effect of the coating film. This revised version was published online in August 2006 with corrections to the Cover Date.     

An Abnormal N‐Heterocyclic Carbene–Carbon Dioxide Adduct from Imidazolium Acetate Ionic Liquids: The Importance of Basicity

In the reaction of 1‐ethyl‐3‐methylimidazolium acetate [C₂C₁Im][OAc] ionic liquid with carbon dioxide at 125 °C and 10 MPa, not only the known N‐heterocyclic carbene (NHC)–CO₂ adduct I , but also isomeric aNHC‐CO₂ adducts II and III were obtained. The abnormal NHC‐CO₂ adducts are stabilized by the presence of the polarizing basic acetate anion, according to static DFT calculations and ab initio molecular dynamics studies. A further possible reaction pathway is facilitated by the high basicity of the system, deprotonating the initially formed NHC‐CO₂ adduct I , which can then be converted in the presence of the excess of CO₂ to the more stable 2‐deprotonated anionic abnormal NHC–CO₂ adduct via the anionic imidazolium‐2,4‐dicarboxylate according to DFT calculations on model compounds. This suggests a generalizable pathway to abnormal NHC complex formation.     

Effects of Sucrose Palmitate on the Physico-Chemical and Mucoadhesive Properties of Buccal Films

In our current research, sucrose palmitate (SP) was applied as a possible permeation enhancer for buccal use. This route of administration is a novelty as there is no literature on the use of SP in buccal mucoadhesive films. Films containing SP were prepared at different temperatures, with different concentrations of SP and different lengths of hydroxypropyl methylcellulose (HPMC) chains. The mechanical, structural, and in vitro mucoadhesive properties of films containing SP were investigated. Tensile strength and mucoadhesive force were measured with a device and software developed in our Institute. Positron annihilation lifetime spectroscopy (PALS) and X-ray powder diffractometry (XRPD) were applied for the structure analysis of the films. Mucoadhesive work was calculated in two ways: from the measured contact angle and compared with direct mucoadhesive work, which measured mucoadhesive force, which is direct mucoadhesion work. These results correlate linearly with a correlation coefficient of 0.98. It is also novel because it is a new method for the determination of mucoadhesive work.     

Oxidation studies of hydrogenated amorphous silicon

Hydrogenated amorphous silicon surfaces, atomically clean and subsequently oxidized to up to 20 Å oxide thickness, were studied using AES and UPS. The oxidation was made in O₂ in the pressure range 10^?9 Torr to 5 atm and at 23 and 300°C. The oxidation rate at 23°C was found to be the same as that of crystalline silicon while at 300°C it was appreciably faster. Changes in the d $\text{N(E)}\text{dE}$ AES Si LVV line shape near 80 eV upon oxidation could be correlated to changes in the silicon-oxygen bonding level observed in UPS. The detailed line shape of the AES Si LVV transition indicates that at 300°C a more homogeneous oxide is produced than at 23°C.     

An organocatalytic ionic liquid

The carbene concentration in 1-ethyl-3-methylimidazolium-acetate ionic liquid is sufficiently high to act as a catalyst in benzoin condensation, hydroacylation and also in oxidation of an alcohol by using CO(2) and air. This observation reveals the potential of ionic liquid organocatalysts, uniting the beneficial properties of these two families of compounds.     

The adsorption of CO on clean and potassium promoted FeO surfaces

The adsorption of CO on a FeO (wustite) surface was investigated using UPS, AES and temperature programmed desorption. These results are compared to those obtained from the same sample following addition of potassium from the decomposition of KOH. CO adsorption was identified following exposure at 300 K to the potassium free surface. The adsorbed species readily desorbs below 500 K. CO adsorption was poisoned by pre-exposure to oxygen at 300 K. This suggests CO is adsorbed at surface oxygen vacancies. CO induced UPS emission features are different from those typically found for CO chemisorbed on transition metal surfaces. The presence of potassium alters the adsorption behavior of CO. The thermal desorption maximum shifts to 625 K. UPS results indicate molecular CO adsorption at 300 K and upon heating to 470 K CO dissociates. The presence of potassium thus promotes CO dissociation on FeO.     

Benzene and ethylene chemisorbed on transition metals; The measurement of energy level shifts which accompany chemisorption

Ultraviolet photoemission spectra for ethylene chemisorbed on Ag(110) and benzene on Ag(110) and Ru(001) indicate adsorption with minimal molecular distortions. A survey of the photoemission data for ethylene and benzene similarly adsorbed on transition metals indicate that the relaxation shift in the binding energy of molecular Orbitals not contributing to the chemisorption bond is essentially independent of the metal when obtained using the value of the work function when the surface is saturated with adsorbate. This observation is in agreement with a theoretical analysis where final state image charge screening is the dominant relaxation mechanism. These observations support the choice of the work function of the surface saturated with adsorbate as the approximation of the adsorption site potential.     

Chiral separation of lansoprazole and rabeprazole by capillary electrophoresis using dual cyclodextrin systems

Novel capillary electrophoresis methods using CDs as chiral selectors were developed and validated for the chiral separation of lansoprazole and rabeprazole, two proton pump inhibitors. Fourteen different neutral and anionic CDs were screened at pH 4 and 7 in the preliminary analysis. Sulfobutyl‐ether‐β‐CD with a degree of substitution of 6.5 and 10 at neutral pH proved to be the most suitable chiral selector for both compounds. Various dual CD systems were also compared, and the possible mechanisms of enantiomer separation were investigated. A dual selector system containing sulfobutyl‐ether‐β‐CD degree of substitution 6.5 and native γ‐CD proved to be the most adequate system for the separations. Method optimization was carried out using an experimental design approach, performing an initial fractional factorial screening design, followed by a central composite design to establish the optimal analytical conditions. The optimized methods (25 mM phosphate buffer, pH 7, 10 mM sulfobutyl‐ether‐β‐CD/20 mM γ‐CD, +20 kV voltage; 17°C temperature; 50 mbar/3 s injection, detection at 210 nm for lansoprazole; 25 mM phosphate buffer, pH 7, 15 mM sulfobutyl‐ether‐β‐CD/30 mM γ‐CD, +20 kV voltage; 18°C temperature; 50 mbar/3 s injection, detection at 210 nm for rabeprazole) provided baseline separation for lansoprazole (R_s = 2.91) and rabeprazole (R_s = 2.53) enantiomers with favorable migration order (in both cases the S‐enantiomers migrates first). The optimized methods were validated according to current guidelines and proved to be reliable, linear, precise, and accurate for the determination of 0.15% distomer as chiral impurity in dexlansoprazole and dexrabeprazole samples.     

Metallacarboranes as Photoredox Catalysts in Water

Metallacarboranes with the shape of the Greek letter θ, such as [Co(C₂B₉H₁₁)₂]⁻, were tested, for the first time, as efficient photoredox catalysts in the oxidation of aromatic and aliphatic alcohols in water. Their efficiency is linked to their high solubility in water, their high oxidizing power (Co^4+/3+), and their absence of fluorescence on excitation, among others. In most of the studied examples, using a catalyst load of 0.4 mol % gave high yields of 90–95 % with selectivity greater than 99 %. By reducing the catalyst load to 0.01 mol %, quantitative conversion of reactants to products was achieved, in some cases with greater than 99 % yield, high catalyst efficiency reaching a turnover number of 10 000, and a higher yield with a 45 times lower concentration of catalyst. The metallacarboranes can be recovered easily by precipitation on addition of [NMe₄]Cl. A pathway for the photoredox-catalyzed oxidation of alcohols is proposed.