Adsorption properties of activated carbon from waste newspaper prepared by chemical and physical activation

Adsorption properties of activated carbons prepared from waste newspaper by chemical and physical activation were investigated using water vapor, ammonia, methane, and methylene blue (MB) as adsorbents. The water vapor adsorption isotherms show type V behavior and the maximum vapor adsorption of the chemically and physically activated products is about 1050 and 450 ml/g, respectively. The higher water vapor adsorption of the chemically activated products is attributed to the higher specific surface area (S(BET)) and greater hydrophilic activity (arising from the surface oxygen-containing functional groups) than in the physically activated products. The adsorption of ammonia and methane was measured by temperature-programmed desorption (TPD). NH(3) adsorption is found to be higher in the chemically activated product than in the physically activated product while methane adsorption is slightly higher in the physically activated products even though these have lower S(BET) values. In the MB adsorption, the chemically activated products show higher adsorption (390 mg/g) than the physically activated product. These results are suggested to be related to the surface characteristics.     

Effect of crystallite size on the thermal phase change and porous properties of boehmite

The effect of crystallite size on the thermal phase change and porous properties of boehmite was investigated using boehmites with crystallite sizes of 2.9 to 24.4 nm and boehmite gels prepared by precipitation and hydrothermal methods. The dehydroxylation temperature of boehmite increases, its phase transition temperature from gamma- to theta-Al(2)O(3) decreases and the theta- to alpha-Al(2)O(3) transition temperature increases as the crystallite size of the boehmite increases. Boehmite with a crystallite size of approximately 5 nm shows the highest specific surface area and greatest thermal stability. This boehmite contains pores of about 2-3 nm radius, suggested to be responsible for the superior porous properties and thermal stability.     

Sliding acceleration of water droplets on a surface coated with fluoroalkylsilane and octadecyltrimethoxysilane

Both fluoroalkylsilane (FAS) and octadecyltrimethoxysilane (ODS) were coated on oxidized silicon wafers using soaking and CVD method. Smooth coatings with Ra values of less than 1 nm were attained. The slope of the sliding acceleration against the inverse of the droplet mass showed an inflection point. That point shifted to the direction of smaller droplets with decreasing FAS ratio to ODS. The water droplets’ length was increased when the sliding velocity was increased. Fluoroalkylsilane addition to ODS increases the interaction between water and the hydrophobic surface. Results showed that the sliding acceleration of a water droplet depends strongly on the surface ratio of these silanes.     

Self-Injection and Acceleration of Monoenergetic Electron Beams from Laser Wakefield Accelerators in a Highly Relativistic Regime

Self-injection and acceleration of monoenergetic electron beams from laser wakefield accelerators are first investigated in the highly relativistic regime, using 100 TW class, 27 fs laser pulses. Quasi-monoenergetic multi- bunched beams with energies as high as multi-hundredMeV are observed with simultaneous measurements of side-scattering emissions that indicate the formation of self-channelfing and self-injection of electrons into a plasma wake, referred to as a ＇bubble＇. The three-dimensional particle-in-cell simulations confirmed multiple self-injection of electron bunches into the bubble and their beam acceleration with gradient of 1.5 GeV/cm.     

Measurement of non-DLVO force on a silicon substrate coated with ammonium poly(acrylic acid) using scanning probe microscopy

The repulsive force originating from steric hindrance of polymers in aqueous solvent was investigated using scanning probe microscopy (SPM). The contact angle (CA) of ammonium poly(acrylic acid) (PAA) solution on the Si surface was measured to estimate the state of the Si substrate. Results of CA measurement show that the Si surface was fully covered with PAA at 0.1 mass% in aqueous solution. The interaction force between the Si tip and the wafer was estimated using the SPM force curve mode. The force curve measured in the ion-exchanged purified water showed the typical relation predicted by Derjaguin-Landau-Verway-Overbeek (DLVO) theory. However, the force curve shape in the 0.1 mass% PAA solution was significantly different. Only a repulsive force was observed at less than about 4 nm of separation distance between the Si wafer and cantilever tip. This distance originated from the steric repulsions of PAA adsorbed onto the Si wafer and cantilever tip.     

Magnetooptical Property of Sodium Borosilicate Gel-Glass Containing Bi-YIG Fine Particles

Composite materials which consist of ferro- or ferrimagnetic fine particles in a glass matrix are expected to have a large residual magnetization and coercive force because of their fine magnetic domain structure, and has potential for superior magneto-optical properties compared with single or polycrystalline materials. In this study, the sodium borosilicate (NBS) glass containing Bi-substituted yttrium iron garnet (Bi _x Y_3–x Fe₅O₁₂: BiYIG) fine particles, which show a superior magneto-optical effect, was prepared by the sol-gel method. BiYIG fine particles were stable in NBS gel-glass matrix during densification because the sintering temperature (580°C) of NBS gel was low enough to avoid pyrolysis of BiYIG and the reaction between BiYIG fine particles and the matrix. The Faraday rotation angle spectrum of the composite after deducting the contribution of the NBS glass matrix was intermediate between the reported ones of YIG and Bi_0.25YIG polycrystalline thin films. The change of the Faraday rotation angles of the composite with imposing magnetic field showed a hysteresis loop. It was in good agreement with that of the magnetization curve of the composite.     

Deformation and motion by gravity and magnetic field of a droplet of water-based magnetic fluid on a hydrophobic surface

Motion and deformation of a water-based magnetic fluid on a hydrophobic surface were investigated under gravity and a magnetic field. Surface energy and the resultant contact angle of the magnetic fluid depend on the surfactant concentration. The fluid viscosity is governed mainly by magnetite concentration. The front edge of the droplet moved under a weak external field. The rear edge required a higher external field for movement. The forces of gravity and the magnetic field for moving of the front edge are almost equal. However, those of the rear edge are different. The motion of magnetic fluids by an external field depends on concentrations of surfactants and magnetic particles, the external field, and experimental assembly.     

Relationship between formation conditions, properties, and crystallite size of boehmite

Boehmites (gamma-AlOOH) with a variety of crystallite sizes were prepared under various precipitation conditions from solutions of aluminum nitrate and sodium aluminate and also by hydrothermal treatment of a commercial boehmite powder. The relationships between the crystallite size and other properties of the boehmites were investigated. Crystalline boehmite was formed in the pH range 7 to 10 while gels precipitated below pH 7 and bayerite (Al(OH)3) formed at pH 11. The crystallite size of the boehmite increased at higher pH, higher temperature of the precursor solution, and longer aging time. As the crystallite size of the boehmite increased, the specific surface area, pore volume, and excess water decreased. Boehmites of small crystallite size, called pseudoboehmite, showed broadened X-ray peak widths and increased d-spacing of the 020 reflection. These changes are attributed to the small crystallite size (smaller numbers of stacking layers) and also to excess water in the interlayers of the boehmite structure.