Continuous flow stable isotope methods for study of delta(13)C fractionation during halomethane production and degradation

Gas chromatography/mass spectrometry/isotope ratio mass spectrometry (GC/MS/IRMS) methods for delta(13)C measurement of the halomethanes CH(3)Cl, CH(3)Br, CH(3)I and methanethiol (CH(3)SH) during studies of their biological production, biological degradation, and abiotic reactions are presented. Optimisation of gas chromatographic parameters allowed the identification and quantification of CO(2), O(2), CH(3)Cl, CH(3)Br, CH(3)I and CH(3)SH from a single sample, and also the concurrent measurement of delta(13)C for each of the halomethanes and methanethiol. Precision of delta(13)C measurements for halomethane standards decreased (+/-0.3, +/-0.5 and +/-1.3 per thousand) with increasing mass (CH(3)Cl, CH(3)Br, CH(3)I, respectively). Given that carbon isotope effects during biological production, biological degradation and some chemical (abiotic) reactions can be as much as 100 per thousand, stable isotope analysis offers a precise method to study the global sources and sinks of these halogenated compounds that are of considerable importance to our understanding of stratospheric ozone destruction.     

Two-level Atom in an Electromagnetic Wave of Circle Polarization

We study a two-level atom interacting with an electromagnetic wave of circle polarization, and work out the wave functions, the energy values and momentum values of the atom. PACS: 32.80.-t, 03.65.Ge     

Infrared spectroscopic characterization of the properties of oxide films grown on Zr surfaces doped under ion-beam irradiation in a vapor-water medium

Infrared spectroscopy is shown to be applicable to the nondestructive check of the state of oxide films on metal substrates doped under irradiation by an ion beam. The reflection spectra of oxide films on zirconium surfaces doped under ion-beam irradiation are obtained. Oxide films were grown by means of oxidation in a vapor-water medium. The analysis of the fine structure of IR spectra has revealed that, at wavelengths of 1–10 μm, the spectra contain resonance lines corresponding to ZrH-and ZrOH-type molecular compounds, OH groups, and other components of oxide.     

Direct equilibration of soil water for delta(18)O analysis and its application to tracer studies

Current methods for stable oxygen isotopic (delta (18)O) analysis of soil water rely on separation of water from the soil matrix before analysis. These separation procedures are not only time consuming and require relatively large samples of soil, but also have been shown to introduce a large potential source of error. Current research at Queen's University Belfast is focused on using direct equilibration of CO(2) with the pore water to eliminate this extraction step using the automated Multiprep system and a Micromass Prism III isotope ratio mass spectrometer (IRMS). The findings of this research indicate the method is less time consuming, more reliable, and reproducible to within accepted limits (+/-0.1% per thousand delta (18)O). In this study the direct equilibration method is used to analyse delta (18)O tracer profiles in the unsaturated zone of field soils, concurrently with chloride tracer profiles, which can be used to assess infiltration rates and mechanisms through the unsaturated zone. Copyright 1999 John Wiley & Sons, Ltd.     

The role of stable isotopes in human identification: a longitudinal study into the variability of isotopic signals in human hair and nails

Recent natural catastrophes with large-scale loss of life have demonstrated the need for a new technique to provide information for disaster victim identification when DNA methods fail to yield the identification of an individual, or in other situations where authorities need to determine the recent geographical life history of people. The latter may be in relation to the identification of individuals detained on suspicion of terrorism or in relation to people-trafficking or smuggling. One proposed solution is the use of stable isotope profiling (SIP) using isotope ratio mass spectrometry (IRMS). Exploiting the link between the isotopic signal of dietary components and the isotopic composition of body tissue, the aim of this study was to refine a non-invasive method of analysing human material such as scalp hair and fingernails using SIP and to assess the degree of natural variability in these profiles. Scalp hair and fingernail samples were collected from British and non-British volunteers at Queen's University Belfast every 2 weeks for a minimum of 8 months. Samples were analysed using IRMS to determine their isotopic composition for 13C, 15N, 2H and 18O. The results of this longitudinal study yielded information on the natural variability of the isotopic composition of these tissues. The data demonstrate the relatively low degree of natural variation in the 13C/15N isotopic abundance of scalp hair and fingernails whilst greater variations were recorded in the hydrogen and oxygen values of the same samples. The 15N and 18O values of nail are noticeably more variable than that of scalp hair from the same subject. A hypothesis explaining this trend is put forward based on the faster rate of formation of hair than of nails. This means that there is less time for the compounds forming hair to be affected by biochemical processes that could alter their isotopic signature.     

Substrate effect on the melting temperature of gold nanoparticles

Previous experimental, molecular dynamics, and thermodynamic researches on the melting temperature of Au nanoparticles on tungsten substrate provide entirely different results. To account for the substrate effect upon the melting point of nanoparticles, three different substrates were tested by using a thermodynamic model: tungsten, amorphous carbon, and graphite. The results reveal that the melting point suppression of a substrate-supported Au nanoparticle is principally ruled by the free surface-to-volume ratio of the particle or the contact angle between the particle and the substrate. When the contact angle θ is less than 90°, a stronger size-dependent melting point depression compared with those for free nanoparticles is predicted; when the contact angle θ is greater than 90°, the melting temperature of the supported Au nanoparticles are somewhat higher than those for free nanoparticles.     

99mTc-Labelled Compounds Prepared with Ti(III) as Reducing Agent

In preparation of ^99mTc-labelled compounds it is possible to use TiCl₃ instead, of SnCl₂; in most cases, however, this substitution changes the biodistribution parameters. The preparations have then a slower blood clearence, being cumulated in bones in larger amounts; bone diagnostics (HEDSPA and pyrophosphate) are opposite cases. This fact makes itself felt in ^99mTc-Ti-gluconate which, in its turn, loses the character of kidney agent cumulating, in a marked way, in bones. From diagnostic point of view, the ^99mTc-Ti-labelled compounds possess, in most cases, worse parameters as compared with those prepared by means of tin dichloride. Preparation of technetium-labelled compounds requires inert nitrogen atmosphere. Time stability of these preparations within 24 hours is good a whole.     

Identification of emission peaks in the spectra of oxide films on a metal surface in the infrared wavelength range

An algorithm for the processing of infrared (IR) reflectance spectra is developed in order to simplify the analysis of the states of oxide films on a metal surface, which allows the types of molecular compounds in an oxide formed in an aqueous medium on the surface of samples pretreated with ion beams via different modes (cleaning, polishing) to be determined. Irregular local cracks and pores with sizes of more than 10–50 μm are found in the oxide films using the IR spectroscopy method. Chemical compounds with hydroxyl groups of the type Me-O and Me-OH are revealed.     

N,N,N-trimethylchitosan iodide complexes with a weak or a strong polyacid and nanoparticles thereof

Polyelectrolyte complexes (PECs) were prepared from N,N,N-trimethylchitosan iodide (TMCh) of different molar mass and a weak polyacid-poly(acrylic acid) (PAA) or a strong polyacid-poly(2-acrylamido-2-methylpropanesulfonic acid) (PAMPS). The quaternization of the amino groups of chitosan enabled the formation of water-insoluble PECs in a broad pH range—from 3 to 12 and from 1 to 12 for TMCh/PAA and TMCh/PAMPS, respectively. Whereas the stoichiometry of the TMCh/PAA complex was pH dependant, the stoichiometry of the TMCh/PAMPS complex did not depend on pH. The stoichiometry and the yield of the complexes were influenced by the molar mass of TMCh. PEC nanoparticles were produced by mixing dilute solutions of the oppositely charged polyelectrolytes as revealed by dynamic light scattering analyses. The size of the particles was in the range of 135–924 nm and depended on the polyelectrolyte molar mass, the initial polyelectrolyte concentration, and the molar fraction of the TMCh units. Microbiological screening against Staphylococcus aureus and Escherichia coli revealed that PECs between TMCh and PAA or PAMPS have a good antibacterial effect, which is more slowly pronounced than that of the starting TMCh of different molar mass.