Application of the single comparator method to instrumental photon activation analysis

Journal of Radioanalytical and Nuclear Chemistry - Instrumental photon activation analysis (IPAA) is nondestructive and multi-elemental analysis method like instrumental neutron activation...     

A green process for coupling manganese oxides with titanium(IV) dioxide

MnO(2) nanoparticle-loaded TiO(2) prepared by a green process capable of removing harmful MnO(4)(-) ions from water exhibits catalytic activity for a test reaction, H(2)O(2) decomposition, in the dark with its activity enhanced by UV light irradiation.     

Solution properties of perfluorinated anionic surfactants with divalent counterion of separate electric charges

Novel surfactants of perfluorinated double long-chain salts with divalent counterion of separate electric charge, 1,1-(1,omega-alkanediyl)bispyridinium diperfluorononanoate (CnBP(FC9)2, n = 2, 4, 6, 8) were newly synthesized. Their solution properties were investigated by surface tension measurement over the temperature range from 298.2 to 313.2 K, where magnesium diperfluorononanoate (Mg(FC9)2) was employed as a reference surfactant with divalent counterion of concentrated electric charge. From change of surface tension with concentration, the critical micelle concentration (CMC), surface excess (Gamma), apparent molecular surface area (A), and -log(concentration to reduce surface tension of water by 20 mN m-1) (pC20) were determined. The CMC values of CnBP(FC9)2 decreased with increasing charge separation and with increasing temperature, where the values of CnBP(FC9)2 were much smaller than those of Mg(FC9)2. In addition, the pC20 values of the former were also much larger than those of the latter. These results indicate a strong influence of the extent of charge separation or the spacer length of the counterions upon surface activity of the fluorinated surfactants. The surface excess or the corresponding apparent molecular surface area monotonously changed with the spacer length (n < or = 6), whereas the behavior for n = 8 was much different from the other CnBP(FC9)2 due to conformational change in the in-between alkanediyl chain. The entropy changes (Deltas) for the surface adsorption or condensation were found to be mostly negative for CnBP(FC9)2, where the changes approached zero with an increase in the charge separation. On the other hand, the changes for Mg(FC9)2 were positive over the whole concentration below the CMC. In addition, Brewster angle microscopy indicated no condensation of the present surfactants just at the air/solution interface.     

Integration of the cleanup process: pretreatment of polycyclic aromatic hydrocarbons from diesel exhaust particles on silica gel beads in a microchannel.

This paper presents an integrated microfluidic system that performs cleanup for polycyclic aromatic hydrocarbons (PAHs) from diesel exhaust particles on silica gel beads in a microchip. A column chromatography phase was constructed by filling the silica gel beads into a microchannel that had a dam structure 25 microm high. The height of the dam structure was determined according to the rate of the wet etching. This work on the cleanup of PAHs from diesel exhaust particles showed that the microchip-based system has the same performance as the conventional method on the solid phase extraction column and has some advantages, such as less reagent consumption and shorter pretreatment time, over the conventional method.     

Synthesis of poly(naphthalenecarboxamide)s with low polydispersity by chain‐growth condensation polymerization

Condensation polymerization of 6‐(N‐substituted‐amino)‐2‐naphthoic acid esters ( 1 ) was investigated as an extension of chain‐growth condensation polymerization (CGCP). Methyl 6‐(3,7‐dimethyloctylamino)‐2‐naphthoate ( 1b ) was polymerized at ?10 °C in the presence of phenyl 4‐methylbenzoate ( 2 ) as an initiator and lithium 1,1,1,3,3,3‐hexamethyldisilazide (LiHMDS) as a base. When the feed ratio [ 1a ]₀/[ 2 ]₀ was 10 or 20, poly(naphthalenecarboxamide) with defined molecular weight and low polydispersity was obtained, together with a small amount of cyclic trimer. However, polymer was precipitated during polymerization under similar conditions in [ 1a ]₀/[ 2 ]₀ = 34. To increase the solubility of the polymer, monomers 1c and 1d with a tri(ethylene glycol) (TEG) monomethyl ether side chain instead of the 3,7‐dimethyloctyl side chain were synthesized. Polymerization of the methyl ester monomer 1c did not proceed well, affording only oligomer and unreacted 1c , whereas polymerization of the phenyl ester monomer 1d afforded well‐defined poly(naphthalenecarboxamide) together with small amounts of cyclic oligomers in [ 1d ]₀/[ 2 ]₀ = 10 and 29. The polymerization at high feed ratio ([ 1d ]₀/[ 2 ]₀ = 32.6) was accompanied with self‐condensation to give polyamide with a lower molecular weight than the calculated value. Such undesirable self‐condensation would result from insufficient deactivation of the electrophilic ester moiety by the electron‐donating resonance effect of the amide anion. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Direct use of allylic alcohols in the allylation of sulfonylimidates

We have developed catalytic allylation reactions of sulfonylimidates using allylic alcohols as allylating reagents. Stoichiometric amounts of neither activators nor bases are required in this reaction.     

Intricate Recognition of Glycolipid-Like Compounds by HIV-1 Envelope Proteins Evaluated with Surface Plasmon Resonance Imaging

Fusion of human immunodeficiency virus (HIV) to the cell membrane occurs by the specific binding of an envelope protein of HIV-1 (gp120 and gp160) and a glycosphingolipid of the cell membrane. In this study, quantitative and array-based affinity evaluation of gp120 and gp160 was performed by surface plasmon resonance (SPR) and the SPR imaging technique using a substrate immobilized with glycolipid-like compounds (Gb3, GM3, and Lac). Quantitative affinity evaluation showed that gp160 specifically bound to Gb3 and Lac compared with GM3, whereas gp120 showed lower binding affinity and specificity. Array-based evaluation showed that gp160 binds to Gb3 more favorably than Lac and GM3.