The Effect of Cyclodextrins on the Photochemical Stability of 7-Amino-4-methylcoumarin in Aqueous Solution

The effect of -, - and -cyclodextrin onthe photochemical stability of 7-amino-4-methylcoumarin (C120)was studied. Using spectroscopic techniques (UV/Vis absorption spectroscopy, fluorescence, fluorescence anisotropy and circular dichroism) combined with HPLC/MS and MS analysis it was demonstrated that addition of -cyclodextrin to the aqueoussolution of C120 markedly inhibits the photodegradation of that dye. This results from theformation of an inclusion complex between C120 and -cyclodextrin.     

Carbamoylimidazolium and thiocarbamoylimidazolium salts: novel reagents for the synthesis of ureas, thioureas, carbamates, thiocarbamates and amides

Carbamoylimidazolium salts act as efficient N,N-disubstituted carbamoylating reagents. These salts are readily prepared by the sequential treatment of secondary amines with N,N′-carbonyldiimidazole (CDI) and iodomethane. The carbamoylimidazolium salts are more efficient carbamoyl transfer reagents than the intermediate carbamoylimidazoles, as a result of the ‘imidazolium’ effect. Kinetic studies on the base promoted hydrolysis of both carbamoylimidazoles and carbamoylimidazolium salts reveal over a hundred-fold rate acceleration. The salts react with amines, thiols, phenols/alcohols, and carboxylic acids in high yields, without the need for subsequent chromatographic purification of the products, producing ureas, thiocarbamates, carbamates, and amides, respectively. Analogous thiocarbamoylimidazolium salts were also synthesized from secondary amines and N,N′-thiocarbonyldiimidazole (TCDI), followed by methylation with iodomethane.     

Normal and Reversed-Phase TLC Determination of Rosmarinic and Valerenic Acids

JPC – Journal of Planar Chromatography – Modern TLC - The chromatographic properties of valerenic and rosmarinic acids have been studied by normal- and reversed-phase TLC with eight...     

Interactions of porphyrin covalently attached to poly(methacrylic acid) with liposomal membranes

The interactions between the 5-(4-acryloyloxyphenyl)-10,15,20-tritolylporphyrin covalently attached to poly(methacrylic acid) chain (PMA-Po) and phosphatidylcholine liposomes in aqueous solution at different pH values were studied. The binding constants (K(b)) for the liposome- PMA-Po in solutions in the pH range from 6.5 to 9.2 were determined using fluorescence spectroscopy. The binding was found to be efficient. The acid-base properties of the porphyrin chromophores were also studied. Both pK values associated with imine-N protonation of the porphyrin core were found to be 6.4. The quantum yield (Phi(Delta)) of singlet oxygen production by Po in the lipid-PMA-Po system was found to be high (0.88 +/- 0.05).     

Synthesis and evaluation of the catalytic properties of semicarbazides derived from N-triphenylmethyl-aziridine-2-carbohydrazides

A straightforward synthesis of a series of new catalysts derived from N-triphenylmethyl-aziridine-2-carbohydrazides is described. The new compounds have been tested for the enantioselective addition of diethyl- and phenylethynylzinc to aryl and alkyl aldehydes, which afforded the corresponding chiral alcohols in high chemical yields (up to 92%) and with excellent ee’s of approximately 90%.     

Comparison of the Microbiological Activities of Different Varieties of Hop (Humulus lupulus) Extracts by Thin-Layer Chromatography—Direct Bioautography

JPC – Journal of Planar Chromatography – Modern TLC - Commercially available hop pellets of different origins were extracted by use of ethanol and water, chromatographed on silica...     

Kinetics and Characterization of Degradation Products of Dihydralazine and Hydrochlorothiazide in Binary Mixture by HPLC-UV,LC-DAD and LC–MS Methods

Dihydralazine and hydrochlorothiazide were stored at high temperature and humidity, under UV/Vis light and different pH, as individual drugs and the mixture. Then, a sensitive and selective HPLC-UV method was developed for simultaneous determination of dihydralazine and hydrochlorothiazide in presence of their degradation products. Finally, the degradation products were characterized through LC-DAD and LC–MS methods. Dihydralazine was sensitive to high temperature and humidity, UV/Vis light and pH?≥?7. At the same time, it was resistant to acidic conditions. Hydrochlorothiazide was sensitive to high temperature and humidity, UV/Vis light and changes in pH. Its highest level of degradation was observed in 1 M HCl. Degradation of the drugs was higher when they were stressed in the mixture. In the case of dihydralazine, the percentage degradation was 5–15 times higher. What is more, dihydralazine became sensitive to acidic conditions. Hydrochlorothiazide was shown to be more sensitive to UV/Vis light and pH?>?4. Degradation of dihydralazine and hydrochlorothiazide followed first-order kinetics. The quickest degradation of dihydralazine was found to be in 1 M NaOH while of hydrochlorothiazide was in 1 M HCl (individual hydrochlorothiazide) or at pH 7–10 (hydrochlorothiazide in the mixture). A number of new degradation products were detected and some of them were identified by our LC-DAD and LC–MS methods. In the stressed individual samples, (phenylmethyl)hydrazine and 1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide were observed for the first time. Interactions between dihydralazine and hydrochlorothiazide in the mixture were confirmed by additional degradation products, e.g., 2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1,4-trioxide.     

Sustainable Drying and Torrefaction Processes of Miscanthus for Use as a Pelletized Solid Biofuel and Biocarbon-Carrier for Fertilizers

Miscanthus is resistant to dry, frosty winters in Poland and most European Union countries. Miscanthus gives higher yields compared to native species. Farmers can produce Miscanthus pellets after drying it for their own heating purposes. From the third year, the most efficient plant development begins, resulting in a yield of 25–30 tons of dry matter from an area of 1 hectare. Laboratory scale tests were carried out on the processes of drying, compacting, and torrefaction of this biomass type. The analysis of the drying process was conducted at three temperature levels of the drying agent (60, 100, and 140 °C). Compaction on a hydraulic press was carried out in the pressure range characteristic of a pressure agglomeration (130.8–457.8 MPa) at different moisture contents of the raw material (0.5% and 10%). The main interest in this part was to assess the influence of drying temperature, moisture content, and compaction pressure on the specific densities (DE) and the mechanical durability of the pellets (DU). In the next step, laboratory analyses of the torrefaction process were carried out, initially using the Thermogravimetric Analysis TGA and Differential Scaning Calorimeter DSC techniques (to assess activation energy (EA)), followed by a flow reactor operating at five temperature levels (225, 250, 275, 300, and 525 °C). A SEM analysis of Miscanthus after torrefaction processes at three different temperatures was performed. Both the parameters of biochar (proximate and ultimate analysis) and the quality of the torgas (volatile organic content (VOC)) were analyzed. The results show that both drying temperature and moisture level will affect the quality of the pellets. Analysis of the torrefaction process shows clearly that the optimum process temperature would be around 300–340 °C from a mass loss ratio and economical perspective.