Microwave‐assisted polycondensation of 4‐octylaniline with dibromoarylene

The Pd‐catalyzed polycondensation of 4‐octylaniline with various dibromoarylenes was carried out under microwave heating. Microwave heating led to a decrease in the reaction time and an increase in the molecular weight of the polymers as compared to conventional heating. Microwave heating also allowed the catalyst loading to be reduced to 1 mol %, yielding polymerization results that were comparable to those under conventional heating and 5 mol % catalyst. Investigations regarding field‐effect transistors and organic photovoltaic cells using the obtained poly(arylamine) with azobenzene units revealed that increasing the molecular weight of the polymer led to improved device performance, including hole mobility and power conversion efficiency. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 536–542     

Characteristics of hyaluronate-hydroxyethyl acrylate blend gel and release of cationic amphiphilic solutes

Hyaluronate-hydroxyethyl acrylate blend gel (HA-PHEA) were prepared to modify the brittleness of hyaluronate gel (HA) and the characteristics of HA-PHEA gel were compared with those of HA and polyhydroxyethyl acrylate (PHEA) gels. These gels were high in water content and transparent. HA-PHEA gel was improved in viscoelastic properties due to the elasticity and the high affinity with water of PHEA, and the drying-swelling cycles became reversible. The effective charge densities theta of the gels estimated from membrane potentials were -0.002, -0.008 and 0 mol dm(-3) for HA-PHEA, HA and PHEA gels. Effects of electro- static and nonelectrostatic interactions on absorptions and releases were studied using sodium benzoate (NaBA) as an anionic solute, and methylene blue (MB), chlorpromazine (CPHCl) and benzethonium chloride (BZTCl) as cationic solutes, in which CPHCl and BZTCl are cationic amphiphilic solutes. The releases of MB, CPHCl and BZTCl from HA-PHEA and HA gels were suppressed comparing with those of NaBA. By adding salts, the releases of MB and CPHCl were enhanced but those of BZTCl were suppressed due to enhancement of the intra- and intermicelle formation. In the releases of the cationic solutes from HA-PHEA gel, electrostatic and nonelectrostatic interactions with HA were found to play important roles. Behaviors of the releases from HA-PHEA gel were found to possess the features of HA gel.     

Water-soluble stilbene dendrimers

The third generation of novel photo-responsive water-soluble stilbene dendrimer (trans- and cis-G3 WSD) undergoes unusual one-way trans-to-cis isomerization to give 100% of cis isomer at the photostationary state on UV irradiation in water.     

Surface structures of adsorption layers of sodium hyaluronate and bovine serum albumin complexes on poly(γ-methyl-l-glutamate) film and their surface properties

Two-dimensional structures and characteristics of the complexes between sodium hyaluronate (NaHA) and bovine serum albumin (BSA) were studied by using a quartz crystal microbalance method and an atomic force microscope (AFM). NaHA did not adsorb on poly(-methyl-l-glutamate) (PMLG) film. On the other hand, the complexes adsorbed on it and the adsorption behaviors were found to be Langmuir types. With increasing weight ratio of BSA to NaHA, W _BSA, the adsorption constants K decreased and the saturated adsorption masses increased. The adsorbed complexes were spherical particles and at saturated adsorption states they covered compactly on the PMLG film. The mean diameters d _AFM estimated from the topographic images decreased from 70 to 54 nm with increasing W _BSA. The adhesion force F _ad and the frictional force F _f between the complex layers and the AFM tip were obtained by using the contact mode of the AFM. With increasing W _BSA, the values of F _ad decreased and the values of F _f increased. Compared with the frictional coefficient of the NaHA adsorption layer on the BSA monolayer, the values for the NaHA–BSA complex layer were found to be much higher.     

Synthesis of 1,2-dihydroisoquinolines via the reaction of ortho-alkynylarylimines with bis-π-allylpalladium

The reaction of the ortho-alkynylarylimines 1 with allyltributylstannane and allyl chloride in the presence of allylpalladium chloride dimer (5 mol %) and Cu(OAc)₂ (20 mol %) in CH₃CN at 50 °C gave the 1,4-diallyl-1,2-dihydroisoquinolines 2 in good yields. Most probably, the reaction proceeds through tandem bis-allylation of the imine-alkyne functional groups with bis-π-allylpalladium.     

Scandium ion-promoted photoinduced electron transfer from electron donors to acridine and pyrene. Essential role of scandium ion in photocatalytic oxygenation of hexamethylbenzene

Photoinduced electron transfer from a variety of electron donors including alkylbenzenes to the singlet excited state of acridine and pyrene is accelerated significantly by the presence of scandium triflate [Sc(OTf)(3)] in acetonitrile, whereas no photoinduced electron transfer from alkylbenzenes to the singlet excited state of acridine or pyrene takes place in the absence of Sc(OTf)(3). The rate constants of the Sc(OTf)(3)-promoted photoinduced electron-transfer reactions (k(et)) of acridine to afford the complex between acridine radical anion and Sc(OTf)(3) remain constant under the conditions such that all the acridine molecules form the complex with Sc(OTf)(3). In contrast to the case of acridine, the k(et) value of the Sc(OTf)(3)-promoted photoinduced electron transfer of pyrene increases with an increase in concentration of Sc(OTf)(3) to exhibit first-order dependence on [Sc(OTf)(3)] at low concentrations, changing to second-order dependence at high concentrations. The first-order and second-order dependence of k(et) on [Sc(OTf)(3)] is ascribed to the 1:1 and 1:2 complexes formation between pyrene radical anion and Sc(OTf)(3). The positive shifts of the one-electron redox potentials for the couple between the singlet excited state and the ground-state radical anion of acridine and pyrene in the presence of Sc(OTf)(3) as compared to those in the absence of Sc(OTf)(3) have been determined by adapting the free energy relationship for the photoinduced electron-transfer reactions. The Sc(OTf)(3)-promoted photoinduced electron transfer from hexamethylbenzene to the singlet excited state of acridine or pyrene leads to efficient oxygenation of hexamethylbenzene to produce pentamethylbenzyl alcohol which is further oxygenated under prolonged photoirradiation of an O(2)-saturated acetonitrile solution of hexamethylbenzene in the presence of acridine or pyrene which acts as a photocatalyst together with Sc(OTf)(3). The photocatalytic oxygenation mechanism has been proposed based on the studies on the quantum yields, the fluorescence quenching, and direct detection of the reaction intermediates by ESR and laser flash photolysis.     

Unambiguous Determination of the Absolute Configurations of Acetylene Alcohols by Combination of the Sonogashira Reaction and the CD Exciton Chirality Method – Exciton Coupling between Phenylacetylene and Benzoate Chromophores

The CD exciton chirality method was applied to various phenylacetylene alcohols to determine their absolute configurations; the long axis polarized –^* transition (_max=252nm) of the 4-methoxyphenylacetylene chromophore couples with the transition (_max=257nm) of the 4-methoxybenzoate group to generate intense exciton split CD Cotton effects, from the signs of which the absolute configurations of phenylacetylene alcohols were unambiguously determined. As an extension of the results, a new methodology for determining the absolute configurations of acetylene alcohols having the HCCCH(OH)-moiety by combination of the Sonogashira reaction and the CD exciton chirality method has been developed and applied. Since the –^* transition of acetylene triple bond is located below 180nm, it is difficult to observe ideal bisignate CD Cotton effects due to the exciton coupling between acetylene and benzoate chromophores. To observe the ideal exciton split Cotton effects necessary for the unambiguous determination of absolute configuration, the terminal acetylene group was converted, by the Sonogashira reaction, to the 4-methoxyphenylacetylene moiety, which exhibits an intense –^* absorption band polarized along the long axis of the chromophore at 252nm. As a partner of exciton coupling, 4-methoxybenzoate showing a –^* band at 257nm was introduced into the alcohol moiety, and the benzoates formed showed intense bisignate CD Cotton effects, from the signs of which the absolute configurations of original acetylene alcohols could be determined in an unambiguous manner.     

Two‐Step direct arylation for synthesis of naphthalenediimide‐based conjugated polymer

A naphthalenediimide (NDI)‐based conjugated polymer was synthesized by a two‐step direct C‐H arylation sequence. In the first step, two ethylenedioxythiophene units were coupled to NDI by direct arylation. In the second step, the direct arylation polycondensation of the monomer, formed in the first step, with 2,7‐dibromo‐9,9‐dioctylfluorene afforded the corresponding NDI‐based conjugated polymer ( PEDOTNDIF ) with molecular weight of 21,500 in 91% yield. The optical and electrochemical properties of the polymer were evaluated. The polymer showed ambipolar behavior in organic field‐effect transistors (OFETs). The electron mobility of PEDOTNDIF was estimated to be 2.3 × 10^?6 cm² V^?1 s^?1 using an OFET device with source‐drain (S‐D) Au electrodes. A modified OFET device with S‐D MgAg electrodes increased the electron mobility for PEDOTNDIF to 1.0 × 10^?5 cm² V^?1 s^?1 due to the more suitable work function of these electrodes, which reduced the injection barrier to the semiconducting polymer. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1401–1407