Fractionation of metals and metalloids by chemical bonding from particles accumulated by electrostatic precipitation in an Argentine thermal power plant

A study was undertaken to evaluate the distribution of Al, As, Cr, Cu, Fe, Mn, Ni, Pb, Ti, V and Zn in fly ashes collected in the electrostatic precipitator of a thermal power plant in San Nicolás (Argentina). Five samples were collected during one week of operation. For the fractionation, the scheme applied consisted in extracting the elements in four fractions namely (i) soluble and exchangeable elements; (ii) carbonates, oxides and reducible elements; (iii) bound to sulfidic metals; and (iv) residual elements. Metals and metalloids at μg g^− 1 level were determined in each fraction by inductively coupled plasma optical emission spectrometry (ICP OES). For validation, a standard reference material (SRM 1633 coal fly ash) from NIST was subjected to the same chemical sequential extraction procedure that the samples. X-ray diffraction powder (XRD) analysis and scanning electron microscopy (SEM) were used to characterize the major minerals present in the matrix. Total analyte concentration (in μg g^− 1) varied from 10.6 for Pb to 17,622 for Al. Minimum and maximum concentrations (in μg g^− 1) found in individual samples in the four fractions were: Al, 92.7–9668; As, < 0.3–143; Cr, 2.0–10.4; Cu, < 0.2–35.6; Fe, < 0.3–4992; Mn, < 0.1–128; Ni, < 0.3–139; Pb, < 0.5–9.1; Ti, < 0.3–2243; V, 17.0–112.9; and Zn, < 0.1–68.2. The leachability of the 11 elements under study proved to be different. Low percentages of Al (1%), V (7%) and Cr (8%) were detected in the most bioavailable fraction. Arsenic was found to be most abundant in the non-silicate phase, represented by the second and third fractions, while Cr, Fe, Ni, Pb and Zn were mostly associated to the residual fraction.     

1‐(1‐Benzoylpropen‐2‐yl)‐3‐methylisothiosemicarbazide

The structure of the title S‐alkyl­ated iso­thio­semicarbazide, C₁₂H₁₅N₃OS, was determined by single‐crystal diffractometry and compared with the structures of other compounds containing the S‐alkyl­thio­semicarbazide moiety. Such structures cluster into two groups, according to the different orientation of the –SR group with respect to the hydrazine N atom of the thio­semicarbazide. The cis arrangement is preferred by most mol­ecules in the solid state, in spite of the possibility of intramolecular N—H?N interactions in the opposite orientation.     

Characterization and determination of 28 elements in fly ashes collected in a thermal power plant in Argentina using different instrumental techniques

Different techniques were selected for comprehensive characterization of seven samples of fly ashes collected from the electrostatic precipitator of the San Nicolás thermal power plant (Buenos Aires, Argentina). Particle size was measured using laser based particle size analyzer. X-ray diffraction powder (XRD) analysis and scanning electron microscopy (SEM) were used to characterize the mineral phase present in the matrix consisting basically of aluminosilicates and large amounts of amorphous material. The predominant crystalline phases were mullite and quartz. Major and minors elements (Al, Ca, Cl, Fe, K, Mg, Na, S, Si and Ti) were detected by energy dispersive X-ray analysis (EDAX). Trace elements (As, Cd, Co, Cr, Cu, Mn, Ni, Pb, Se, V and Zn) content was quantified by inductively coupled plasma optical emission spectrometry (ICP OES). Different acid mixtures and digestion procedures were compared for subsequent ICP OES measurements of the dissolved samples. The digestion procedures used were: i) a mixture of FH + HNO₃ + HClO₄ (open system digestion); ii) a mixture of FH + HNO₃ (MW-assisted digestion); iii) a mixture of HF and aqua regia (MW-assisted digestion). Instrumental neutron activation analysis (INAA) was employed for the determination of As, Ba, Co, Cr, Ce, Cs, Eu, Fe, Gd, Hf, La, Lu, Rb, Sb, Sc, Sm, Ta, Tb, Th, U and Yb. The validation of the procedure was performed by the analysis of two certified materials namely, i) NIST 1633b, coal fly ash and ii) GBW07105, rock. Mean elements content spanned from 41870 μg g^− 1 for Fe to 1.14 μg g^− 1 for Lu. The study showed that Fe (41870 μg g^− 1) ? V (1137 μg g^− 1) > Ni (269 μg g^− 1) > Mn (169 μg g^− 1) are the main components. An enrichment, with respect to crustal average, in many elements was observed especially for As, V and Sb that deserve particular interest from the environmental and human health point of view.     

Artificial metalloenzymes for enantioselective catalysis based on biotin-avidin

Homogeneous and enzymatic catalysis offer complementary means to generate enantiomerically pure compounds. Incorporation of achiral biotinylated rhodium-diphosphine complexes into (strept)avidin yields artificial metalloenzymes for the hydrogenation of N-protected dehydroamino acids. A chemogenetic optimization procedure allows one to produce (R)-acetamidoalanine with 96% enantioselectivity. These hybrid catalysts display features reminiscent both of enzymatic and of homogeneous systems.     

Artificial metalloenzymes: (strept)avidin as host for enantioselective hydrogenation by achiral biotinylated rhodium-diphosphine complexes

We report on the generation of artificial metalloenzymes based on the noncovalent incorporation of biotinylated rhodium-diphosphine complexes in (strept)avidin as host proteins. A chemogenetic optimization procedure allows one to optimize the enantioselectivity for the reduction of acetamidoacrylic acid (up to 96% ee (R) in streptavidin S112G and up to 80% ee (S) in WT avidin). The association constant between a prototypical cationic biotinylated rhodium-diphosphine catalyst precursor and the host proteins was determined at neutral pH: log K(a) = 7.7 for avidin (pI = 10.4) and log K(a) = 7.1 for streptavidin (pI = 6.4). It is shown that the optimal operating conditions for the enantioselective reduction are 5 bar at 30 degrees C with a 1% catalyst loading.     

Structural Diversity from the Transannular Cyclizations of Natural Germacrone and Epoxy Derivatives: A Theoretical–Experimental Study

Treatment of germacrone ( 1 ) with different electrophiles, and of its epoxy derivatives germacrone‐4,5‐epoxide ( 2 ), germacrone‐1,10‐epoxide ( 3 ) and isogermacrone‐4,5‐epoxide ( 4 ) with Brönsted/Lewis acids and Ti^III, gives rise to a great structural diversity. Thus, by using a maximum of two steps, the production of more than 40 compounds corresponding to 14 skeletons is described. Computational calculations rationalizing the structural divergence produced are also described. Finally, since some of the compounds generated are bioactive natural sesquiterpenes, the mechanisms of formation of these substances will provide new insights in their biosynthesis.     

Chemo-genetic optimization of DNA recognition by metallodrugs using a presenter-protein strategy

The mode of action of precious metal anticancer metallodrugs is generally believed to involve DNA as a target. However, the poor specificity of such drugs often requires high doses and leads to undesirable side-effects. With the aim of improving the specificity of a ruthenium piano-stool complex towards DNA, we employed a presenter protein strategy based on the biotin-avidin technology. Guided by the X-ray structure of the assembly of streptavidin and a biotinylated piano-stool, we explored the formation of metallodrug-mediated ternary complexes with the presenter protein and DNA. The assemblies bound more strongly to telomere G-quadruplexes than to double-stranded DNA; chemo-genetic modifications (varying the complex or mutating the protein) modulated binding to these targets. We suggest that rational targeting of small molecules by presenter proteins could be exploited to bind metallodrugs to preferred macromolecular targets.     

Antimony as a traffic-related element in size-fractionated road dust samples collected in Buenos Aires

The growing interest of public opinion in environmental problems conducted us to investigate the levels of a toxic traffic-related element such antimony in 19 size-fractionated street dust samples. Samples were collected in the megacity of Buenos Aires during two months at 19 sites with different urban characteristics and traffic profile. Samples were sieved in four fractions (F1 < 37 µm, F2: 37-55 µm, F3: 55-75 µm and F4: 55-100 µm) before elemental analysis. A mixture of aqua regia and hydrofluoric acid was used to digest all samples. Antimony concentrations were quantified by inductively coupled plasma optical emission spectrometry (ICP OES) or flow injection hydride generation-atomic absorption spectrometry (FI-HG-AAS).Twenty four out of 73 sub-samples analyzed showed Sb levels < 0.05 µg g^− 1; in the rest of the samples mean Sb concentrations varied from 1.4 to 20.4 µg g^− 1. Maximum and minimum concentrations (in µg g^− 1) found in individual samples in the four fractions were: Fraction 1, < 0.05-20.4; Fraction 2, < 0.05-18.4; Fraction 3, < 0.05-6.3; Fraction 4, < 0.05-7.7.Antimony was found to be enriched in the smallest size fraction of road dust, with mean enrichment factors varying between 27 (F3) and 272 (F1). Concentrations of Sb were correlated with those of other traffic-related elements such as Cu and Pb and higher levels were found in areas with medium and high traffic densities.     

Improving the water resistance of epoxy–anhydride matrices by the incorporation of bentonite

Epoxy–anhydride‐based polymers are commonly used as a matrix in pipeline systems exposed to water during their in‐service life. Water absorption at moderate temperatures and/or at long exposure times could lead to irreversible hydrolysis reaction decreasing considerably the polymer overall performance. A strategy to enhance the barrier properties of epoxy resins is to add nanofillers to traditional matrices. In this work, we added bentonite and chemically modified bentonite to this purpose. Water absorption of the resulting materials at three different temperatures (22°C, 80°C, and 93°C) was studied, and simultaneously, the evolution during the immersion tests of glass transition temperature and flexural modulus was recorded. Long‐term gravimetric results showed that composites with chemically modified bentonite produce a delay on the hydrolysis of epoxy–anhydride matrix, which is a relevant result, because of the tough application and uses of the system, from the technological point of view. Copyright © 2016 John Wiley & Sons, Ltd.     

Preparation,Characterization and Application of Modified Surfaces with 3,5-Bis(3,5-dinitrobenzoyl-amino) benzoic acid

Summary: The spontaneous adsorption of the dendron 3,5-Bis (3,5-dinitrobenzoylamino) benzoic acid (D-NO₂) onto gold and carbon electrodes produced conductive surfaces with electroactive chemical functions. A comparative electrochemical behavior of both electrodes after dendron immobilization led us to conclude that the self-assembly of D-NO₂ on carbon is faster and stronger. Considering this advantage, the surface of magnetic maghemite nanoparticles (MNPs) was modified using D-NO₂. Firstly, MNPs were modified with APS as silane coupling agent and afterwards, D-NO₂ was covalently attached to the surface, achieving nitro-functionalized MNPs. Subsequently, the immobilization of these modified MNPs onto glassy carbon surfaces was explored to generate a novel platform promising for biosensors development.