Surface modification of TiO2 nanoparticles with AHAPS aminosilane: distinction between physisorption and chemisorption

This paper addresses the surface modification of TiO₂ nanoparticles with n-(6-aminohexyl)aminopropyltrimethoxysilane (AHAPS) using various initial aminosilane concentrations. The main objective of this article is to show experimentally the importance of the physisorption during the grafting process. The distinction between chemisorbed and physisorbed aminosilane molecules on TiO₂ is thoroughly analyzed. The surface of bare and modified TiO₂ particles has been characterized by Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS) to gain a better understanding of the adsorption mechanism of AHAPS on TiO₂. Quantitative information on surface energy of TiO₂, in terms of adsorption energy sites and heterogeneity, has been investigated by quasi-equilibrium low-pressure adsorption technique using nitrogen and argon as probe molecules. The FTIR and XPS data are combined to estimate and discuss the chemisorbed and physisorbed contribution. The results demonstrate that both physisorption and chemisorption occurs but they display a different behavior. The physisorbed amounts are much higher than the chemisorbed amounts. This shows that the main part of the adsorbed layer is composed of physisorbed molecules. The physisorbed uptake depends highly on the AHAPS concentration while the chemisorbed amount remains constant. Quasi-equilibrium Ar derivative adsorption isotherms reveal that the AHAPS molecules are mostly located on the {101} and {001} faces of titania and that the two faces display the same reactivity toward AHAPS sorption. Nitrogen adsorption experiments show that the sorption takes place on the three polar surface sites of high energy. The molecules are chemisorbed onto the site displaying the highest energy while they are physisorbed on the two lower energy sites.     

Synthesis of Hierarchical MOR-Type Zeolites with Improved Catalytic Properties

Hierarchical MOR-type zeolites were synthesized in the presence of hexadecyltrimethylammonium bromide (CTAB) as a porogen agent. XRD proved that the concentration of CTAB in the synthesis medium plays an essential role in forming pure hierarchical MOR-type material. Above a CTAB concentration of 0.04 mol·L⁻¹, amorphous materials are observed. These hierarchical mordenite possess a higher porous volume compared to its counterpart conventional micrometer crystals. Nitrogen sorption showed the presence of mesoporosity for all mordenite samples synthesized in the presence of CTAB. The creation of mesopores due to the presence of CTAB in the synthesis medium does not occur at the expense of zeolite micropores. In addition, mesoporous volume and BET surface seem to increase upon the increase of CTAB concentration in the synthesis medium. The Si/Al ratio of the zeolite framework can be increased from 5.5 to 9.1 by halving the aluminum content present in the synthesis gel. These synthesized hierarchical MOR-type zeolites possess an improved catalytic activity for n-hexane cracking compared to large zeolite crystals obtained in the absence of CTAB.     

Iodonium‐polyoxometalate and thianthrenium‐polyoxometalate as new one‐component UV photoinitiators for radical and cationic polymerization

Four novel onium salts (onium‐polyoxometalate) have been synthesized and characterized. They contain a diphenyliodonium or a thianthrenium (TH) moiety and a polyoxomolybdate or a polyoxotungstate as new counter anions. Outstandingly, these counter anions are photochemically active and can sensitize the decomposition of the iodonium or TH moiety through an intramolecular electron transfer. The phenyl radicals generated upon UV light irradiation (Xe–Hg lamp) are very efficient to initiate the radical polymerization of acrylates. Cations are also generated for the cationic polymerization of epoxides. Remarkably, these novel iodonium and TH salts are characterized by a higher reactivity compared with that of the diphenyliodonium hexafluorophosphate and the commercial TH salt, respectively. Interpenetrating polymer networks can also be obtained under air through a concomitant cationic/radical photopolymerization of an epoxy/acrylate blend (monomer conversions > 65%). The photochemical mechanisms are studied by steady‐state photolysis, cyclic voltammetry, and electron spin resonance techniques. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 981–989     

Physicochemical Properties of the Dispersion of Titanium Dioxide in Organic Media by Using Zetametry Technique

The study of the physicochemical properties of solids dispersed in organic media, and especially the dispersion of titanium dioxide (TiO₂) particles, is very important in many industrial processes. The aim of this study is to determine the acid-base behavior of TiO₂ particles dispersed in organic media by measuring their zeta potential by electrophoresis technique. After normalized the electron donor (DN′)and acceptor numbers (AN′)of organic solvents, we applied our new method to determine the donor (DN _S ′) and acceptor numbers (AN _S ′) of TiO₂ by using a Mathematica program. The effect of pretreatment temperature on physicochemical properties of TiO₂ was also studied. Results obtained showed that DN _S ′ values of TiO₂ are comprised between 36 and 47 (or 14 and 19 kcal/mol) and AN _S ′ values comprised between 10 and 17.     

Azahelicenes as visible light photoinitiators for cationic and radical polymerization: Preparation of photoluminescent polymers and use in high performance LED projector 3D printing resins

In this article, novel azahelicenes (AZs) were synthesized and proposed as high performance visible light photoinitiators for both the free radical polymerization of acrylates and the cationic polymerization (CP) of epoxides upon visible light exposure using Light Emitting Diodes (LEDs) @405, @455, and @470 nm. Excellent polymerization initiating abilities are found and high final conversions were obtained. Remarkably, an exceptional long lifetime photoluminescence property of the polymer films was observed when synthesized in presence of AZs. A full picture of the involved chemical mechanisms is given. AZs being high performance photoinitiators, their use in new cationic LED 3D printing resins will be also presented, that is, the cationic process upon LED projector @405 nm can be useful to reduce the shrinkage usually observed for radical polymerization. LED projector printing is very interesting compared to laser writing as this technology projects the profile of an entire layer of a 3D object at one time. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 55, 1189–1199     

3-Carboxylic Acid and Formyl-Derived Coumarins as Photoinitiators in Photo-Oxidation or Photo-Reduction Processes for Photopolymerization upon Visible Light: Photocomposite Synthesis and 3D Printing Applications

In this paper, nine organic compounds based on the coumarin scaffold and different substituents were synthesized and used as high-performance photoinitiators for free radical photopolymerization (FRP) of meth(acrylate) functions under visible light irradiation using LED at 405 nm. In fact, these compounds showed a very high initiation capacity and very good polymerization profiles (both high rate of polymerization (Rp) and final conversion (FC)) using two and three-component photoinitiating systems based on coum/iodonium salt (0.1%/1% w/w) and coum/iodonium salt/amine (0.1%/1%/1% w/w/w), respectively. To demonstrate the efficiency of the initiation of photopolymerization, several techniques were used to study the photophysical and photochemical properties of coumarins, such as: UV-visible absorption spectroscopy, steady-state photolysis, real-time FTIR, and cyclic voltammetry. On the other hand, these compounds were also tested in direct laser write experiments (3D printing). The synthesis of photocomposites based on glass fiber or carbon fiber using an LED conveyor at 385 nm (0.7 W/cm²) was also examined.