Resolution of binary mixtures of cephalothin and clavulanic acid by using first derivative spectrophotometry

First-derivative spectrophotometric method with a “zero-crossing” technique of measurement has been used for the quantification of two-components mixtures of cephalothin and clavulanic acid. As the absorption bands of these drugs overlap, both direct and derivative spectrophotometric methods have been investigated and evaluated by a rigorous statistical analysis of the experimental data. The first-derivative spectrophotometric method was found to be more accurate, direct and reproducible. Beer's law was valid over the concentration range 2.0–28.0 mg/l for both compounds. The detection limits of cephalothin and clavulanic acid, at a 0.05 level of significance, were calculated to be 0.13 and 0.15 mg/l. The method was applied for determining these antibiotics in mixtures, some of them containing inject-able dosage forms of cephalothin, and so to determine both compounds in saline and glucosed physiological sera.     

An Asymmetric Edge-Sharing Bioctahedral Complex: (η2-DAniF)MoIII(μ-DAniF)2(μ-O,Cl)MoVCl2 (DAniF=N,N′-di-p-anisylformamidinate)

A novel asymmetric, edge-sharing bioctahedral complex with formamidinato ligands ( ²-DAniF)Mo(-DAniF)₂(-O,Cl)MoCl₂, 1, (DAniF=N,N-di-p-anisylformamidinate) has been isolated as a byproduct from the preparation of the dimolybdenum(II,III) compound Mo₂(DAniF)₃Cl₂. An X-ray crystallographic study shows that the structure consists of edge-sharing bioctahedra, with the shared edge defined by the vector joining the: -O and -Cl ligands. Compound 1 is best formulated as a mixed-valent Mo^IIIMo^V compound, the Mo(V) ion being that with the two terminal Cl^– ligands. The cyclic voltammogram of 1 shows a reversible reduction at –0.472 V and a reversible oxidation at 1.028 V vs. the Ag/AgCl reference electrode, while the absorption spectrum of 1 reveals an intense low energy absorption at 523 nm ( _max=12 500) which is attributed to an intervalence charge transfer transition. Crystallographic data for 1 are as follows: a=13.387(1) Å, b=15.500(2) Å, c=21.855(2) Å, =98.786(2)°, V=4481.8(8) ų, P2₁/c, R1 (wR2)=0.082 (0.177).     

Aerobic alcohol oxidation catalyzed by a new, oxygen-bridged heterometallic compound [PPh4][Ru(N)Me2(μ2-O)2Pd((−)-sparteine)]

The reaction between the new hydroxy compound [PPh₄][Ru(N)(OH)₂Me₂] and Pd(OSiMe₃)₂((−)-sparteine) produces (Me₃Si)₂O, H₂O and a new heterobimetallic compound [PPh₄][Ru(N)Me₂(μ₂-O)₂Pd((−)-sparteine)] in good yield. The Ru/Pd bimetallic compound catalyzes the oxidation of aryl and allyl alcohols to the corresponding carbonyl compound in air and the rearrangement of allylic alcohols unsaturated aldehydes. It also oxidizes PPh₃ to O-PPh₃ under O₂.     

Reaction products of W(CO)(6) with formamidines; electronic structure of a W(2)(mu-CO)(2) core with unsymmetric bridging carbonyls

Reactions of W(CO)(6) with formamidines contrast with those of Mo(CO)(6) and Cr(CO)(6) in that the former do not yield quadruply bonded dimetal species. From the reaction of W(CO)(6) with HDAniF (HDAniF = N,N'-di-p-anisylformamidine), several new ditungsten carbonyl compounds (W(2)(mu-CO)(2)(mu-DAniF)(2)(eta(2)-DAniF)(2) (1), W(2)(mu-CO)(2)(mu-DAniF)(2)(eta(2)-DAniF)(eta(2)-CH(2)DAniF) (2), and W(2)(mu-CO)(mu-CNC(6)H(4)OCH(3))(mu-DAniF)(2)(eta(2)-DAniF)(2) (3)) have been isolated and fully characterized. In 2, CH(2)DAniF represents a DAniF ligand in which a methylene group has been added to one of the nitrogen atoms. This ligand binds to the tungsten atom using a nitrogen and a carbon atom. Compound 1 has a tungsten-tungsten bond distance of 2.476(1) A and a planar W(2)(mu-CO)(2) core structure which has C(2)(h)() symmetry with short and long W-C bond distances (1.99(1) and 2.28(1) A, respectively). DFT calculations on a model of 1 indicate that (a) the C(2)(h)() instead of D(2)(h)() symmetry of the ditungsten core may be attributed to W --> CO pi back-bonding interactions and (b) the bond between the tungsten atoms may be formulated as a double bond. The new tetragonal paddlewheel compound W(2)(DAniF)(4) (4) and the edge-sharing bioctahedron W(2)(mu-O)(mu-NC(6)H(3)Cl(2))(mu-D(Cl)PhF)(2)(eta(2)-D(Cl)PhF)(2) (5) (D(Cl)PhF = N,N'-di-(3,5-dichlorophenyl)formamidinate) have also been prepared.     

The equilibrium properties and folding kinetics of an all-atom Go model of the Trp-cage

The ultrafast-folding 20-residue Trp-cage protein is quickly becoming a new benchmark for molecular dynamics studies. Already several all-atom simulations have probed its equilibrium and kinetic properties. In this work an all-atom Go model is used to accurately represent the side-chain packing and native atomic contacts of the Trp-cage. The model reproduces the hallmark thermodynamics cooperativity of small proteins. Folding simulations observe that in the fast-folding dominant pathway, partial alpha-helical structure forms before hydrophobic core collapse. In the slow-folding secondary pathway, partial core collapse occurs before helical structure. The slow-folding rate of the secondary pathway is attributed to the loss of side-chain rotational freedom, due to the early core collapse, which impedes the helix formation. A major finding is the observation of a low-temperature kinetic intermediate stabilized by a salt bridge between residues Asp-9 and Arg-16. Similar observations [R. Zhou, Proc. Natl. Acad. Sci. U.S.A. 100, 13280 (2003)] were reported in a recent study using an all-atom model of the Trp-cage in explicit water, in which the salt-bridge stabilized intermediate was hypothesized to be the origin of the ultrafast-folding mechanism. A theoretical mutation that eliminates the Asp-9-Arg-16 salt bridge, but leaves the residues intact, is performed. Folding simulations of the mutant Trp-cage observe a two-state free-energy landscape with no kinetic intermediate and a significant decrease in the folding rate, in support of the hypothesis.     

The remarkable ability of lithium ion to reverse the stereoselectivity in the conjugate addition of Li[BuCuI] to a chiral N-crotonyl-2-oxazolidinone

[reaction: see text] The influence of lithium ions on the conjugate addition of the monoorganocuprate reagent, Li[BuCuI], to a chiral crotonate has been investigated. The results show that iodotrimethylsilane (TMSI) is crucial for the asymmetric conjugate addition of the copper reagent, but only in THF or when 12-crown-4 is used. The reaction is thought not to involve any halosilane in any critical steps in the organocopper mechanisms conducted in Et(2)O.     

Synthesis of some dibenzodiazepinone derivatives as potent and m2-selective antimuscarinic compounds

Two series of 5-[[4-[4-(dialkylamino)butyl]-l-cyclohexyl]acetyl], and 5-[(dialkylamino)acyl]-10,11-dihydro-5H- dibenzo[b,e][1,4]diazepin-11-ones were synthesized as potential m2-selective ligands 1,2. Their affinity and selectivity for the muscarinic cholinergic receptor m-AChR subtypes were determined. Replacing a nitrogen with CH in the piperidine ring of 5-[[4-[4-(dialkylamino)butyl]-l-piperidinyl]acetyl]-10,11-dihydro-5H-dibenzo-[b,e][1,4]diazepin-11-ones 3 significantly altered the affinity and selectivity to the muscarinic receptor subtypes.     

The extraordinary ability of guanidinate derivatives to stabilize higher oxidation numbers in dimetal units by modification of redox potentials: structures of Mo(2)(5+) and Mo(2)(6+) compounds

Full characterization of the first homologous series of dimolybdenum paddlewheel compounds having electronic configurations of the types sigma(2)pi(4)delta(x), x = 2, 1, 0, and Mo-Mo bond orders of 4, 3.5, and 3, respectively, has been accomplished with the guanidinate-type ligand hpp (hpp = the anion of 1,3,4,6,7,8-hexahydro-2H-pyrimido[1,2-a]pyrimidine). Essentially quantitative oxidation of Mo(2)(hpp)(4), 1, by CH(2)Cl(2) gives Mo(2)(hpp)(4)Cl, 2. The halide in 2 can be replaced by reaction with TlBF(4) to produce Mo(2)(hpp)(4)(BF(4)), 3. Further oxidation of 2 by AgBF(4) produces Mo(2)(hpp)(4)ClBF(4), 4. The change from bond order 4 (in 1) to 3.5 in Mo(2)(hpp)(4)Cl is accompanied by an increase in the Mo-Mo bond length of 0.061 to 2.1280(4) A. A further increase of 0.044 A in the Mo-Mo distance to 2.172(1) A is observed as the bond order decreases to 3 in 4. At the same time, the Mo-N distances decrease smoothly as the oxidation state of the Mo atoms increases. Electrochemical studies have shown two chemically reversible processes at very negative potentials, E(1)(1/2)= -0.444 V and E(2)(1/2)= -1.271 V versus Ag/AgCl. These correspond to the processes Mo(2)(6+/5+) and Mo(2)(5+/4+), respectively. The latter potential is displaced by over 1.5 V relative to those of the Mo(2)(formamidinate)(4) compounds and the first one has never been observed in such complexes. Thus, in surprising contrast to previously observed behavior of the dimolybdenum unit, when it is surrounded by the very basic guanidinate ligand hpp, there is an extraordinary stabilization of the higher oxidation numbers of the molybdenum atoms.     

Spectrofluorimetric analysis of cefoxitin in pharmaceutical dosage

A fluorescence method involving sample pre-treatment is investigated concerning the determination of cefoxitin. A fluorescent product is formed when samples containing cefoxitin are subjected to alkaline hydrolysis with 1.0M sodium hydroxide and heated for 60 min at 90 degrees . The fluorescence is measured in ethanol/water medium (50% v/v) at approximately pH 2.0 provided by adding of 0.1M hydrochloric acid. The fluorescence excitation and emission maxima were 317 and 400 nm, respectively. The quantitative range is between 0.020 and 1.40 mug/ml. A detection limit of 2 x 10(-3) mug/ml was found. The proposed method has been applied to the determination of cefoxitin in commercial injections, saline and glucosed physiological serum.     

Synthesis and Structural Studies of Platinum Complexes Containing Monodentate, Bridging, and Chelating Formamidine Ligands

The reactions of K(2)PtCl(4) with N,N'-diphenylformamidine (HDPhF) and N,N'-di-p-tolylformamidine (HDTolF) produce the trans square-planar compounds PtCl(2)(HDPhF)(2), 1a, and PtCl(2)(HDTolF)(2), 1b. Compound 1a crystallizes as yellow parallelepipeds in the space group P2(1)/c with two independent molecules in the asymmetric unit and unit cell dimensions a = 23.427(7) ?, b = 16.677(6) ?, c = 12.980(4) ?, and beta = 96.10(2) degrees. These compounds are soluble in common organic solvents and have been used as starting materials for the preparation of diplatinum compounds. Treatment of 1a and 1b with NaOMe and the halide abstraction reagent TlPF(6) produces the compounds Pt(2)(&mgr;-DArF)(2)(eta(2)-DArF)(2), Ar = Ph (2a) and Tol (2b), respectively. Compound 2a crystallizes as yellow rods in the space group P&onemacr; with unit cell dimensions a = 12.296(3) ?, b = 12.310(4) ?, c = 15.374(4) ?, alpha = 90.75(2) degrees, beta = 91.02(2) degrees, and gamma = 110.20(2) degrees. Compound 2b crystallizes with a molecule of THF, as yellow rods in the space group P2(1)/c with a = 17.883(3) ?, b = 14.517(3) ?, c = 22.581(3) ?, and beta = 98.17(1) degrees. These compounds contain two cis bridging formamidinato ligands and two formamidinato ligands that are chelated to separate Pt centers. Upon heating, they further react to give the tetrabridged compounds Pt(2)(&mgr;-DArF)(4), Ar = Ph (3a), Tol (3b). Compound 3a crystallizes as orange cubes in the cubic space group I432 with a = 19.671(1) ?. On going from the bis-bridged, bis-chelate structure in 2a to the tetrabridged structure in 3a, the metal-metal separation decreases from 2.910(1) to 2.649(1) ?. Both 2band 3b have been oxidized to give the Pt(II)-Pt(III) compound Pt(2)(&mgr;-DTolF)(4)(PF(6)), 4. Compound 4 crystallizes as cubes in the tetragonal space group P4/ncc with a = 14.392(1) ? and c = 14.436(1) ?. The Pt-Pt distance in 4 is 2.5304(6) ?.