NMR spectral analysis of strongly second-order 6-, 8-, 9- and 10- spin-systems (1H─19F, 19F─19F,and 13C─19F) in perfluorotoluyl- and tetrafluoro-pyridyl-aromatics using the lineshape method ANATOLIA

A simple to use nuclear magnetic resonance analysis method has been tested on complex ¹H, ¹⁹F, and ¹³C multiplets. This open-source line-shape analysis method analysis of total lineshape (ANATOLIA)¹ provides some significant advantages over traditional assign-iterate methods of NMR spectral analysis by avoiding false minima and progressing optimisation to the global minimum. The target molecules are 1-perfluorotol-4-yl-2-perfluorotol-4-yl-oxymethyl-1H-benzimidazole (molecule-I) and 1-tetrafluoropyrid-4-yl-2-tetrafluoropyrid-4-yl-thio-1H-benzimidazole (molecule-II) which were produced as part of a family of fluorinated drug scaffolds prepared for anticancer and antiparasitic screening. Spectra display significant second-order effects with ¹H Δδ = 3.68 and 4.67 Hz for the aromatic hydrogen “triplets”, with ¹⁹F ⁴J_AA', ⁴J_BB', ⁴J_XX', and ⁴J_YY' coupling constants range from +4.8 to −14.0 Hz and for ¹³C-isotopomers ¹⁹F Δδ of up to 111.56 Hz. A spin-system of six coupling nuclei (H_aH_bH_cH_d F_YF_Y') was analysed in 12 s, a spin-system of nine coupling fluorine nuclei (AA'BB'CCC-YY') was analysed within 2 min, and 10 coupling nuclei (XX'YY'ZZZ-BB'-H_d) was optimised in 6 min using a laptop computer. ANATOLIA was also robust enough to be able to yield accurate spectral values from inaccurate input values. In both compounds, a fluorine–fluorine coupling constant was identified between the two fluoro-aromatic rings (F_BB' and F_YY') of +4.05 and +4.67 Hz and attributed to a through-space interaction. Ab initio structure optimisations and coupling constant calculations provided useful input data for spectral analysis. A modern ¹⁹F nuclear magnetic resonance spectrum of perfluorotoluene (octafluorotoluene) and analysis from 1975 was used as a test data set to assess ANATOLIA.     

Analysis of thermally induced multistable composites

This paper models the non-linear flexural response of laminates that have piecewise variation of lay-up in the planform, using finite element analysis. Attention is focused on the effects that thermal stresses have on the potential multiple shapes of a composite structure. Unsymmetric laminates may possess more than a single equilibrium configuration, and during the cool-down the solution thus bifurcates at a critical temperature. In static analyses, numerical solutions are often coaxed to converge into one or the other branch of the solution. A methodology to overcome this problem is presented. Such modelling is necessary to allow application of multistable composite within morphing aircraft structures as multistable composites could provide a viable solution for the realisation of shape-adaptable structures.     

Mössbauer and infrared spectroscopic studies of novel mixed valence states in cobaltous ferrocyanides and ferricyanides

Novel mixed valence states have been obtained by the treatment of cobaltous ferrocyanides (Co⁺²Fe^II) and ferricyanides (Co⁺²Fe^III) in an ozone flow. The CN stretching bands occur at 2085 cm^–1 for Co⁺²Fe^II and at 2160 cm^–1 for Co⁺²Fe^III. After the ozonization process of Co⁺²Fe^II, an intense band approximately at 2125 cm^–1 is detected. This intermediate band must correspond to a mixed valence state of the type: Fe^II–CN–Co²⁺–NC–Fe^III Mössbauer spectra recorded in situ during the ozonization of Co⁺²Fe^II show the presence of two components: a doublet with isomer shift and quadrupole splitting values close to the cobalti ferricyanide and a very broad line for the mixed valence state. From the Mössbauer and infrared spectra of the aged samples of the Co⁺²Fe^II after ozonization, a relaxation process to the initial state of the samples is observed but the mixed valence state is stable.     

Oxidation of nitrided si(100) by gaseous atomic and molecular oxygen

The nitridation of Si(100) by ammonia and the subsequent oxidation of the nitrided surface by both gaseous atomic and molecular oxygen was investigated under ultrahigh vacuum (UHV) conditions using X-ray photoelectron spectroscopy (XPS). Nitridation of Si(100) by the thermal decomposition of NH3 results in the formation of a subsurface nitride and a decrease in the concentration of surface dangling bond sites. On the basis of changes in the N1s spectra obtained after NH3 adsorption and decomposition, we estimate that the nitride resides about four to five layers below the vacuum-solid interface and that the concentration of surface dangling bonds after nitridation is only 59% of its value on Si(100)-(2 x 1). Oxidation of the nitrided surface is found to produce an oxide phase that remains in the outer layers of the solid and interacts only weakly with the underlying nitride for oxygen coverages up to 2.5 ML. Slight changes in the N1s spectra observed after oxidizing at 300 K are suggested to arise primarily from the introduction of strain within the nitride, and by the formation of a small amount of Si2=N-O species near the nitride-oxide interface. The nitrogen bonding environment changes negligibly after oxidizing at 800 K, which is indicative of greater phase separation at elevated surface temperature. Nitridation is also found to significantly reduce the reactivity of the Si(100) surface toward both atomic and molecular oxygen. A comparison of the oxygen uptake on the clean and nitrided surfaces shows quantitatively that the decrease in dangling bond concentration is responsible for the reduced activity of the nitrided surface toward oxidation, and therefore that dangling bonds are the initial adsorption site for both gaseous oxygen atoms and molecules. Increasing the surface temperature is found to promote the uptake of oxygen when O2 is used as the oxidant, but brings about only a small enhancement in the uptake of gaseous O-atoms. The different effects of surface temperature on the uptake of O versus O2 are interpreted in terms of the efficiency at which dangling bond pairs are regenerated on the surface at elevated temperature and the different site requirements for the adsorption of O and O2.     

Synthesis and aqueous solution properties of a well-defined thermo-responsive schizophrenic diblock copolymer

We report only the second example of a thermo-responsive 'schizophrenic' diblock copolymer surfactant: unlike the original (meth)acrylamide-based example reported by Laschewsky and co-workers (J. Am. Chem. Soc., 2002, 124, 3787), this new methacrylate-based diblock copolymer is near-monodisperse, readily synthesized in high yield and exhibits a broad temperature range between the two micelle transitions.     

Double-layer effects on simple electrode reactions III. The reduction of Eu3+ and Cr3+ in the presence of thiocyanate anions. Evidence for ligand bridging

The rates of reduction of Eu³⁺ and Cr³⁺ have been measured in mixed perchlorate + thiocyanate electrolytes at constant ionic strength, using low concentrations of thiocyanate to minimize its association with the cationic reactants. The effect of adsorbed thiocyanate anions on the reduction kinetics of Cr³⁺ resembled those produced by iodide and bromide on both Cr³⁺ and Eu³⁺. However, thiocyanate exhibited an unusual catalytic effect on the reduction of Eu³⁺ which was identified as arising from a reaction pathway involving thiocyanate-bridging between the mercury surface and the Eu³⁺. The diagnostic criteria used to support the proposed mechanism included analysis of the rate—potential behavior and of the effects of competitively adsorbed iodide ions upon the reduction rates.     

Evaluation of unimolecular rate constants for some outer-sphere electrochemical reactions

Unimolecular rate constants, k_et (s^?1), and transfer coefficients, α_cet, for the outer-sphere electroreduction of several Co(III) ammine and ethylenediamine complexes have been evaluated by electrostatically adsorbing the reactants at silver electrodes coated with chloride or bromide monolayers. Sufficiently strong diffuse-layer adsorption is thereby produced so to enable k_cet and α_cet to be determined by means of linear sweep voltammetry, employing sufficiently fast sweep rates (10–100 V s^?1) and dilute reactant concentrations (≤ 50 μM) so that the bulk solution reactant contributes negligibly to the observed faradaic transients. Comparison with corresponding rate constants and transfer coefficients for the solution reactants enables the influence of precursor-state stability upon the latter rate parameters to be assessed.     

Double-layer effects on simple electrode reactions II. The effects of specifically adsorbed anions and ion-pairing on the reduction of Eu3+ and Cr3+

The kinetics of the reduction of Eu³⁺ and Cr³⁺ at mercury electrodes have been studied in various mixed perchlorate electrolytes containing iodide, bromide, and p-toluene-sulfonate as adsorbing anions. Specific adsorption data were obtained by means of the constant ionic strength approach due to Hurwitz and Parsons. The rate enhancements observed in the presence of the first two (monatomic) anions were in good agreement with the predictions of the simple Frumkin model only when the experimental, rather than calculated diffuse-layer capacitances were employed in the data analysis. It was demonstrated that the effects of ion-pairing and ligand-bridging of the reactants with the adsorbing anions were negligible under the experimental conditions chosen. From experiments with these systems and also with weakly adsorbing chloride electrolytes it was concluded that ion-pairing did not enhance the electrochemical reactivity of either Eu³⁺ or Cr³⁺. The value of the analyses described in separating various contributions to the catalytic effects of adsorbing anions is emphasized.