Automated derivatization for on-line solid-phase extraction-gas chromatography; phenolic compounds

An automated system for derivaatization was coupled on-line with solid-phase extraction-gas-chromatography (SPE-GC). The system was optimized for the determination of phenol and chlorinated phenols in aqueous samples. The test analytes were acetylated with acetic anhydride; proper buffering of the sample was a critical factor. Next, the phenol acetates were enriched on a SPE cartridge and transferred to a GC; two appraoaches were studied. In the first approach, the derivatives were enriched on disposable C18 cartridges (ASPEC type) and desorbed with methylacetate. Aan aliquot of the final eluate was injected on-line the GC by means of a loop-type interface. In the second approach, trace enrichment was performed on 10 × 2 mm i.d. LC-type precolumn packed with polystyrenedivinylbenzene copolymer (PLRP-S) this precolumn was dried with a mitrogen purge and the phenol acetates were desorbed with ethyl acetate which was injectedon-line into the retention gap of the GC under partially concurrent solvent evaporation (PCSE) conditions. The Derivatization-SPE-GC system which was based on the loop-type interface has the advantage of simplicity and easy operation, the main drawback is the impossibility to determine phenol acetates which elute prior to trichlorophenol acetates. With the derivatization-SPE-GC approach using PCSE-based desorption, even the most volatile analyte of the test series, phenol acetate, can be determined successfully. The entire procedure, including the derivatization step, was fully automated and integrated in one set-up. The precision data for the integrated on-line derivatization-SP-FID system were fully satisfactory, with RSD values of 1–12 % at the 1 μg/1 level. When a sample volume of 2.2 ml was analyzed, The detection limits for the chlorinated phenol acetates were in the 0.1–0.3 μg/1 range.     

Flow-through microdispenser for interfacing micro-HPLC to Raman and mid-IR spectroscopic detection

A flow-through microdispenser has been coupled to a micro HPLC separation system and used as a solvent elimination interface for Fourier transform infrared (FTIR) and Raman spectroscopic detection of the separated compounds. Using the microdispenser picoliter sized droplets can be generated and deposited on an appropriate target placed on a computerized x, y-stage. Evaporation of volatile solvent and buffer is rapid and allows analysis of the obtained dry deposits by various techniques. Due to the destruction free character of Raman and FTIR spectroscopy they can be applied sequentially to interrogate the same deposit. In the reported application five phenolic acids typically present in wine have been separated on a C-18 column technique using a mixture of water, methanol and acetic acid as mobile phase. For spectrum acquisition infrared and Raman microscopes have been used. The spectra recorded from the dried deposits of the separated compounds agreed well with the reference spectra of corresponding components.     

Lead tetraacetate-iodine oxidation of 23-spirostanols

Reactions of 23R- and 23S-23-spirostanols in the 25R and 25S series with lead tetraacetate-iodine were studied. The reactions carried out at low temperature afforded d-seco-iododialdehydes and C₂₂ lactones, while similar reactions performed in refluxing tetrachloromethane yielded 20-chlorolactones and their 21-acetoxy derivatives irrespective of the hydroxyl group configuration at C-23. The reaction mechanisms are discussed.     

1‐Chloro‐2‐nitro­benzene: N—O⋯Cl halogen bonds and aromatic π–π stacking,and thermal vibrations in the vicinity of the melting point

The crystal structure of 1‐chloro‐2‐nitro­benzene, C₆H₄ClNO₂, is made up of mol­ecules which are linked by N—O⋯Cl halogen bonds. These mol­ecular chains are involved in aromatic π–π stacking; the inter­molecular O⋯Cl distance is 3.09 Å. Such short halogen bonds are not common. A rigid‐body analysis including the non‐rigidly attached rigid group provides the mean‐square amplitudes of the mol­ecular translations and librations, and of the inter­nal torsional vibrations of the nitro group. The results reveal the driving role of the torsional vibrations of the nitro group in the phase transition to the liquid phase.     

Selective and sensitive detection of organic contaminants in water samples by on-line trace enrichment–gas chromatography–mass spectrometry

Liquid chromatographic (LC) type trace enrichment is coupled online with capillary gas chromatography (GC) with mass spectrometric (MS) detection for the analysis of aqueous samples. A volume of 1–10 ml of an aqueous sample is preconcentrated on a trace-enrichment column packed with a polymeric stationary phase. After cleanup with HPLC-grade water the precolumn is dried with nitrogen and subsequently desorbed with ethyl acetate. A fraction of 60 μl is introduced on-line into a diphenyltetramethyldisilazane-deactivated retention gap under partially concurrent solvent evaporation conditions and using an early solvent vapor exit. The analytes are separated and detected by means of GC–MS. The potential of the LC–GC–MS system for monitoring organic pollutants in river and drinking water is studied. Target analysis is carried out with atrazine and simazine as model compounds; the detection limits achieved under full-scan and multiple ion detection conditions are 30 pg and 5 pg, respectively. Identification of unknown compounds (non-target analysis), is demonstrated using a river water sample spiked with 168 pollutants varying in polarity and volatility.     

Mixing method influence on compatibility and polymorphism studies by DSC and statistical analysis

Most of the pharmaceutical products are formulated as solid dosage form, which may present drug–excipient interactions that lead to changes in the chemical nature of the drug, such as solubility and bioavailability and may compromise its safety and effectiveness. Differential scanning calorimetry (DSC) is a widely used method for the rapid evaluation of the drug-excipient compatibility and the stability of the mixture formed; however, there is no consensus on the preparation methods of the drug–excipient mixtures. The aim of this study was to investigate the influence of the mixing method on the drug–excipient compatibility studies by means of DSC analysis, using tenofovir disoproxil fumarate as a drug model. Statistical analysis revealed significant differences in the heat of fusion of the drug in the mixtures prepared by several mixing methods. Vortex Mixer with a Pop-Off Cup used for 3 min proved to be very satisfactory for these studies. A polymorphic transition was observed in the mixture prepared with the mortar and pestle. Therefore, this method should be avoided since it may induce errors in the interpretation of DSC results. In this way, the mixing method used to prepare a mixture for studies of interactions between the API and the excipients in a pharmaceutical formulation has a great influence on the results and it must be chosen carefully.     

金纳米粒子在TiO2气凝胶基质上的行为: 光催化活性评价和结构研究

TiO2 -Au aerogels containing different amounts of gold nanoparticles of different sizes (5 and 16 nm) were successfully synthesized using a sol-gel procedure, and were tested for salicylic acid photodegradation under UV irradiation. The structure and morphology of the obtained materials were investigated using X-ray diffraction, transmission electron microscopy, and N2 adsorption-desorption measurements. UV-Vis spectroscopy was used to study the optical properties. The effects of the gold nanoparticles on the TiO2 crystallization process were twofold, as follows: (i) the number of crystallized zones was strongly related to the concentration of the gold nanoparticles, and (ii) the smaller gold particles increased the time taken for the crystallization of the samples. It was found that the noble metal-doped samples exhibited higher degradation rates compared with bare titania. It was found that the most active photocatalyst in each studied system was the sample with the highest concentration of gold nanoparticles. Additionally, the highest degradation rate value was obtained with the smallest Au nanoparticles (46.4 10-3 μmol/(L·s).     

Spectra of certain types of polynomials and tiling of integers with translates of finite sets

We investigate Fuglede's spectral set conjecture in the special case when the set in question is a union of finitely many unit intervals in dimension 1. In this case, the conjecture can be reformulated as a statement about multiplicative properties of roots of associated with the set polynomials with (0,1) coefficients. Let be an N-term polynomial. We say that {θ₁,θ₂,…,θ_N−1} is an N-spectrum for A(x) if the θ_j are all distinct and