An enrichment method of molybdenum on a cellulose nitrate resin for the determination by electrothermal atomic absorption spectrometry coupled with the resin suspension injection.

Cellulose derivative resin (CDR) suspensions containing resin particles of cellulose nitrate (CDR(CN)), cellulose acetate (CDR(CA)), or cellulose triacetate (CDR(CTA)) were prepared as the sorbent for resin suspension injection (RSI) electrothermal atomic absorption spectrometry (ETAAS), in which fine resin particles holding a desired trace element were directly injected into the graphite tube as the suspension. To compare the sorption ability, the distribution ratios of the Mo(VI)-phenylfluorone complex were measured between the aqueous phase and the sorbents, including the CDRs mentioned above and the finely divided anion exchange resin (AR). The results showed that the sorption ability decreases in the following order: CDR(CN) > or = AR > CDR(CA) > or = CDR(CTA). It was concluded that CDR(CN) was able to extract more than 98% of Mo(VI), and was suitable for RSI-ETAAS as well as AR. CDR(CN) was used for the determination of Mo in NIES certified reference materials, No. 10 Rice flour-unpolished; the results showed fairly good agreements between the analytical values and the certified values.     

Preparation of open tubular solid-phase extraction column with 5-amino-8-hydroxyquinoline-modified gold nanoparticle phase for the enrichment of heavy metal ions.

A 5-amino-8-hydroxyquinoline (AHQ)-modified gold nanoparticle (GNP) layer was fabricated on an inner wall of a silica capillary column by alternatively passing a citrate-stabilized GNP solution and an AHQ solution in a repeating fashion. The observations by a field emission scanning electron microscope showed that the thickness of the resulting GNP layer was about 0.15 microm. This column was then used as an open tubular solid-phase extraction column for cadmium, followed by electrothermal atomic absorption spectrometric determination. The detection limit of 0.009 ng ml(-1) was obtained.     

Determination of tin by resin-suspension electrothermal atomic absorption spectrometry after enrichment as the complex with ammonium pyrrolidinedithiocarbamate.

A resin-phase extraction method has been optimized for the trace determination of tin(II) by ETAAS. Tin(II) was extracted on a finely divided anion exchange resin as the complex with ammonium pyrrolidinedithiocarbamate (APDC). The resin was collected on a membrane filter and then dispersed in 1.00 ml of 1 mol l(-1) nitric acid containing 100 microg of Pd(II) and 60 microg of Ni(II). The resulting resin suspension was subjected to GFAAS. The proposed method was applied to the determination of tin(II) in hydrochloric acid.     

Preconcentration of Nickel(II) in White Wine Using Quinoxaline-2,3-dithiol and a Finely Divided Anion-Exchange Resin for the Determination by Solid-Phase Spectrophotometry

A simple and sensitive method for the determination of trace amounts of nickel(II) is described. The method is based on the adsorptive enrichment of nickel(II) as the complex with quinoxaline-2,3-dithiol using a finely divided anion-exchange resin, collection of the resin on a membrane filter by filtration, and direct measurement of the absorbance of the resultant circular thin layer by reflective spectrophotometry at 605 nm. In the presence of interfering cations such as copper(II) and cobalt(II) a sample solution is first filtered, after the addition of ammonium thiocyanate and Zephiramine, to extract these cations onto a membrane filter as the ion-pair precipitate formed between the metal-thiocyanate complex anions and Zephiramine cations, then nickel(II) in the filtrate is determined. Interferences from iron(III), silver(I), bismuth(III), cadmium(II), mercury(II), indium(III), palladium(II), platinum(IV), tin(IV), and zinc(II) can also be eliminated. The proposed method was applied to the determination of nickel in white wine. The concentrations of nickel found in 5-ml aliquots of 10 different wine samples were in the range 16.1-68.0 ng ml⁻¹.     

Solid-Phase Extraction with Slurry Injection of the Resin Into ETAAS for Trace Determination of Thallium in Natural Water

Thallium in natural water samples was determined by electrothermal atomic absorption spectrometry after 1000-fold enrichment by mini solid-phase extraction from a 100-mL sample solution. A Tl-pyrrolidine-1-carbodithioate complex formed in a sample solution of pH 1.6 was extracted on fine particles of a cellulose nitrate resin dispersed in the sample solution. The cellulose nitrate resin was then collected on a membrane filter (25mm^ø) by filtration under suction using a glass funnel with an effective filtration area of 0.64cm². As a result, a circular thin layer of the resin phase with a diameter of 9mm was obtained. Then the resin phase was carved out by an acrylate resin puncher with a 10-mm^ø hole to put it into a sample cup containing 100µL of 10mM HNO₃ containing 0.5mM NaCl. The resin phase was suspended in the solution by ultrasonication. 1000-fold enrichment was thus attained within 15min, and the suspension was delivered to electrothermal atomic absorption spectrometry. The linear calibration graph was obtained in the range of 0–4ng of Tl in 100mL of a sample solution. The detection limit obtained by 3 method was 0.19ng. The proposed method was applied to the determination of Tl in natural water samples. The results showed the concentration of Tl in seawater was 12.1±1.8pgmL^–1 for the calibration graph method and 12.6±1.4pgmL^–1 for the standard addition method. A snowmelt sample contained 20.7±1.0pgmL^–1 of Tl.     

Determination of V(IV) and V(V) by electrothermal atomic absorption spectrometry following selective solid-phase extraction and the study on the change in the oxidation state of vanadium species in seawater during the sample storage.

The changes in the oxidation state of vanadium in artificial and natural seawater samples were studied by electrothermal atomic absorption spectrometry (ETAAS) with a direct injection of a resin suspension. V(IV) and V(V) were extracted as the complex with Chromazurol B and with N-cinnamoyl-N-2,3-xylylhydroxylamine, respectively, using a suspension of an anion-exchange resin and determined by ETAAS independently. The detection limits of both methods were 0.02 ng ml(-1) for 40 ml of a sample solution. The recovery tests for an artificial seawater sample spiked with V(IV) and/or V(V) were carried out carefully. The results showed that the recoveries of V(IV) or V(V) were 99.2-109% and the standard deviations were 1-6%. The total V was also determined after V(V) was reduced by ascorbic acid. In artificial seawater at pH 7.8, V(V) was stable but V(IV) was oxidized rapidly. In acidified artificial seawater (pH 2.0), V(IV) was oxidized slowly but only a small tendency of such reduction of V(V) was observed. In a natural seawater sample, V(IV) was not detected. The acidification of the natural seawater sample resulted in the reduction of V(V).     

Determination of thallium in potassium chloride and electrolyte replenishers by electrothermal atomic absorption spectrometry

Thallium in potassium chloride and electrolyte replenishers was determined by electrothermal atomic absorption spectrometry (ETAAS) with direct injection of a resin suspension. Thallium(III) was extracted on fine particles of a cellulose nitrate resin (CNR) from dilute HCl (pH 1.6) in the presence of ammonium pyrrolidine-1-carbodithioate. The CNR particles were collected on a membrane filter by filtration under suction, suspended in 1.0 mL 10mM HNO3, and then delivered directly to ETAAS as the suspension. The effects of chloride ions were thoroughly investigated. The results showed that the addition of 0.5mM NaCl to the suspension (10mM HNO3) was recommended, after CNR and a membrane filter holding the CNR were washed thoroughly with 0.025M HCl, to eliminate interference from chloride ions. No chemical modifier was required. Extraction from the solution containing up to 2M chloride ion was allowable. The proposed method gave a concentration factor of 50 for a 50 mL sample volume. The detection limit (3sigma, n = 5) was 1 ng (20 pg/mL). The relative standard deviation was 4.9% (n = 5) at 30 ng level of thallium. The content of thallium in potassium chloride was 15.7-32.8 ng/g, and in electrolyte replenishers was 0.18-4.16 ng/mL.     

Spontaneous formation of mesoporous silica films using non-surfactant template, and optimization with Doehlert designs, for adsorbent for polycyclic aromatic hydrocarbons

To prepare mesoporous silica thin-films by a simple and environmentally friendly pathway, spontaneous formation of silica thin-films in a sol–gel solution without surfactants was studied. The silica thin-films were prepared by immersing a glass substrate, such as a cylindrical test-tube, into a sol–gel solution containing tetraethoxysilane, water, acetic acid, 2-propanol, and triethylene glycol as a pore-forming agent. The resulting thin-films were transparent. The presence of mesopores was confirmed by field-emission scanning electron microscopy, atomic-force microscopy and nitrogen adsorption–desorption isotherms. The Barrett–Joyner–Halenda plot from the adsorption branch of the isotherms indicated that the pore diameter was 2.6 nm. To illustrate the potential use of the film as an adsorbent, the extraction of polycyclic aromatic hydrocarbons was conducted using the chemically modified silica thin-film coated on a test-tube. The composition of the sol–gel solution was optimized using experimental design, i.e., Doehlert design, and recovery of polycyclic aromatic hydrocarbons.     

On‐line sample preconcentration by polarity switching in floating electrode‐integrated microchannel

In this study, we found that the polarity switching was effective to enrich and separate fluorescent analytes which have weakly‐dissociated groups in a floating platinum electrode (width, 50 µm; thickness, 2.5 µm)‐integrated straight‐channel in microchip electrophoresis (MCE). In the straight channel filled with an Alexa Flour 488 (AF488) solution, a sharp peak was observed after the polarity inversion with a 530‐fold enhancement of the sensitivity relative to the conventional MCE analysis. By using a fluorescent pH indicator, we verified that a sharp high‐pH zone was generated nearby the floating electrode and moved toward the anode with maintaining the high pH, which induced the sample enrichment like a dynamic pH junction mechanism. In the floating electrode‐embedded channel, the mixture of AF488‐labeled proteins was also well concentrated and separated within 100 s.     

Nonaqueous capillary gel electrophoretic analysis of metal nanoclusters in polymeric–DMSO–Li+ systems

In this study, we investigated a combination of nonaqueous CE with capillary gel electrophoresis to achieve highly efficient analysis of metal nanoclusters. In the nonaqueous capillary gel electrophoresis (NACGE), PVA and hydroxypropyl methylcellulose were dissolved in DMSO. In addition, to enhance the entanglement of the polymer chains, Li⁺ ions were also added. By employing the PVA‒DMSO‒Li⁺ solution, we studied the effects of the molecular weight, the degree of hydrolysis, and the concentration of the polymers and Li⁺ on the separation. As a result, good separations of standard mononuclear metal complexes and tetrairon nanoclusters were achieved by NACGE.