Dynamics of Drop Formation in an Electric Field

The effect of an electric field on the formation of a drop of an inviscid, perfectly conducting liquid from a capillary which protrudes from the top plate of a parallel-plate capacitor into a surrounding dynamically inactive, insulating gas is studied computationally. This free boundary problem which is comprised of the surface Bernoulli equation for the transient drop shape and the Laplace equation for the velocity potential inside the drop and the electrostatic potential outside the drop is solved by a method of lines incorporating the finite element method for spatial discretization. The finite element algorithm employed relies on judicious use of remeshing and element addition to a two-region adaptive mesh to accommodate large domain deformations, and allows the computations to proceed until the thickness of the neck connecting an about to form drop to the rest of the liquid in the capillary is less than 0.1% of the capillary radius. The accuracy of the computations is demonstrated by showing that in the absence of an electric field predictions made with the new algorithm are in excellent agreement with boundary integral calculations (Schulkes, R. M. S. M. J. Fluid Mech. 278, 83 (1994)) and experimental measurements on water drops (Zhang, X., and Basaran, O. A. Phys. Fluids 7(6), 1184 (1995)). In the presence of an electric field, the algorithm predicts that as the strength of the applied field increases, the mode of drop formation changes from simple dripping to jetting to so-called microdripping, in accordance with experimental observations (Cloupeau, M., and Prunet-Foch, B. J. Aerosol Sci. 25(6), 1021 (1994); Zhang, X., and Basaran, O. A. J. Fluid Mech. 326, 239 (1996)). Computational predictions of the primary drop volume and drop length at breakup are reported over a wide range of values of the ratios of electrical, gravitational, and inertial forces to surface tension force. In contrast to previously mentioned cases where both the flow rate in the tube and the electric field strength are nonzero, situations are also considered in which the flow rate is zero and the dynamics are initiated by impulsively changing the field strength from a certain value to a larger value. When the magnitude of the step change in field strength is small, the results of the new transient calculations accord well with those of an earlier stability analysis (Basaran, O. A., and Scriven, L. E. J. Colloid Interface Sci. 140(1), 10 (1990)) and thereby provide yet another testament to the accuracy of the new algorithm. Copyright 1999 Academic Press.     

Nondestructive Monitoring of Sucrose Diffusion in Oil-in-Water Emulsions by Ultrasonic Velocity Profiling

The diffusion of sucrose through an optically opaque oil-in-water emulsion was monitored nondestructively by measuring the ultrasonic velocity as a function of height. Initially, a corn oil-in-water emulsion (0, 5, 10, 15, or 20 wt% oil) stabilized by Tween 20 (1 wt%) and xanthan (1 wt%) was placed in a measurement cell at 30°C. A 20 wt% sucrose solution containing the same concentration of Tween 20 and xanthan as the aqueous phase in the emulsion was placed on top of the emulsion. The ultrasonic velocity of this two-layer system was measured as a function of sample height and time and then converted into sucrose and oil concentration–distance profiles using empirical calibration curves. The translational diffusion coefficient of the sucrose in the upper and lower layers was determined by fitting the experimental data to a Fickian diffusion model. The measured diffusion coefficients of the sucrose molecules decreased as the droplet concentration in the emulsion increased, indicating retardation of the sugar molecule movement. Ultrasonic profiling was also used to monitor the compression of the emulsion due to movement of water molecules into the upper layer.     

Investigation of Raman,FT-IR,EPR spectra and antimicrobial activity of 2-(5-H/Me/Cl-1<Emphasis Type="BoldItalic">H</Emphasis>-benzimidazol-2-yl)-phenol ligands and their Fe(NO<Subscript>3</Subscript>)<Subscript>3</Subscript> complexes

2-(5-H/Me/Cl-1H-benzimidazol-2-yl)-phenol ligands form 1:1 electrolytes, 5-coordinate monometallic complexes with iron(III) nitrate. The geometry of the [Fe(L)(OH)(H₂O)₂](NO₃) complexes was derived from theoretical calculation in DGauss/DFT level (DZVP basis set) on CACHE. In all of the complexes the ligands are bidentate, via one imine nitrogen atom and phenolate oxygen atom. The coordination is completed with a hydroxide ion, and two water molecules, adopting a distorted square pyramidal geometry. The structures of the compounds were confirmed on the basis of elemental analysis, molar conductivity, magnetic moment, FT-Raman, FT-IR (mid-IR, far-IR), EPR and u.v.–vis. The antimicrobial activities of the free ligands, their hydrochloride salts, and the complexes were evaluated using the disk diffusion method in dimethyl sulfoxide (DMSO) as well as the minimal inhibitory concentration (MIC) dilution method, against nine bacteria and the results are compared with several known antibiotic agents. Antifungal activities were reported for Candida albicans, Kluyveromyces fragilis, Rhodotorula rubra, Debaryomyces hansenii, Hanseniaspora guilliermondii, and the results were referenced against nystatin, ketaconazole, and clotrimazole antifungal agents. In most cases, the compounds tested showed broad-spectrum (Gram⁺ & Gram⁻ bacteria) activities that were either more active or as potent as the references.     

Effects of soluble surfactants on the deformation and breakup of stretching liquid bridges

Surfactants are routinely used to control the breakup of drops and jets in many applications such as inkjet printing, crop spraying, and DNA or protein microarraying. The breakup of surfactant-free drops and jets has been extensively studied. By contrast, little is known about the closely related problem of interface rupture when surfactants are present. Solutions of a nonionic surfactant, pentaethylene glycol monododecyl ether, or C12E5, in water and in 90 wt % glycerol/water are used to show the effects of surfactant and viscosity on the deformation and breakup dynamics of stretching liquid bridges. Equilibrium surface tensions for both solutions can be fitted with the Langmuir-Szyskowski equation. All experiments have been done at 24 degrees C. The critical micelle concentrations for C12E5 are 0.04 and 0.4 mM in water and the glycerol/water solution, respectively. With high-speed imaging, the dynamic shapes of bridges held captive between two rods of 3.15 mm diameter are captured and analyzed with a time resolution of 0.1-1 ms. The bridge lengths are 3.15 mm initially and about 5-7 mm at pinch-off. Breakup occurs after stretching for about 0.2-0.3 s, depending on the solution viscosity and the surfactant concentration. When the liquid bridges break up, the volume of the sessile drop left on the bottom rod is about 3 times larger than that of the pendant drop left on the top rod. This asymmetry is due to gravity and is influenced by the equilibrium surface tensions. Surfactant-containing low-viscosity water bridges are shown to break up faster than surfactant-free ones because of the effect of gravity. With or without surfactant, water bridges form satellite drops. Surfactant-containing high-viscosity glycerol/water bridges break up more slowly than surfactant-free ones because of strong viscous effects. Moreover, the shapes of the sessile drops close to breakup exhibit a "pear-like" tip; whether a satellite forms depends on the surface age of the bridge before stretching commences. These unexpected effects arising from the addition of surfactants are due to the capillary pressure reduction and Marangoni flows linked to dynamic surface tension.     

Polyfluorene Thin Films Synthesized by a Novel Plasma Polymerization Method

The synthesis of polyfluorene (PF) thin films by simultaneously superposing a continuous and pulsed discharge and the characterizations of these samples are presented. The double discharge plasma system is constructed by superposing two discharges; namely, a low pressure dc glow one and a high current pulsed one. The fluorene monomer in powder form was vaporized in the system at argon plasma without any modification, at 0.5 mbar operating pressure. The structure of the thin films was investigated via XPS, UV–visible, FTIR, XRD and SEM. The FTIR and the UV–visible results revealed that the fluorene structure was retained at the produced samples. Semi-conducting behavior was established, and upon the iodine doping, the optical energy band gap (E _g ) dropped down from 3.7 to 2.4 eV. The morphology of the synthesized PF thin films was amorphous, with granular structures of different sizes depending on the location of the substrate.     

Development and validation of an LC‐MS/MS method for simultaneous quantitative analysis of free and conjugated bisphenol A in human urine

Bisphenol A (BPA) is an environmental endocrine‐disrupting chemicals that is widely used in common consumer products. There is an increasing concern regarding human exposure to BPA owing to the potential adverse effects associated with its estrogenic activity. For assessing environmental exposure to BPA, it is essential to have a sensitive, accurate and selective analytical method, especially one that can detect low BPA levels in complex sample matrices. In this study, we developed and validated an accurate, sensitive, and robust liquid chromatography–tandem mass spectrometry method for simultaneous quantification of free BPA and BPA β‐d ‐glucuronide (BPA‐gluc) concentrations in human urine with only a single injection. Calibration curves were linear over a concentration range of 1–100 ng/mL for BPA and 10–1000 ng/mL for BPA‐gluc. The levels of the analytes were determined quantitatively with HPLC/ESI‐MS/MS by using negative electrospray ionization in the select ion monitoring mode and a pentaflouraphenyl propyl column. The validated method was applied to the analysis of spot urine specimens collected from randomly selected healthy human subjects. Copyright © 2013 John Wiley & Sons, Ltd.     

Low Reynolds number aerodynamics of free-to-roll low aspect ratio wings

The aerodynamics of thin, flat-plate wings of various planforms (rectangular, elliptical and Zimmerman) have been studied in free-to-roll experiments in a wind tunnel. Non-zero trim angles at low angles of attack, self-induced roll oscillations with increasing angle of attack and even autorotation in some cases were observed. The rectangular wings with round leading-edge had non-zero trim angles at low incidences due to the asymmetric development of the three-dimensional separation bubble at these low Reynolds numbers. With increasing angle of attack, the bubble increases in length and once reattachment is lost, large amplitude roll oscillations develop. The Strouhal number of the roll oscillations is of the order of 10⁻², which is in the same range as those expected for small aircraft experiencing atmospheric gusts. Velocity measurements revealed that variations in the strength of the vortices drove the rolling motion. At the mean roll angle, because of the time lag in the strength of the vortices, an asymmetric flow is generated, which results in a net rolling moment in the direction of the rolling motion.     

Thermal Decomposition Kinetics of Some Metal Complexes of 2,3-Hydroxyimino-4-phenyl-6-phenyazo-1-thia-4,5-diazacyclohexa-5-diene

The Ni(II), Cu(II) Co(II) and Zn(II) complexes of 2,3‐hydroxyimino‐4‐phenyl‐6‐phenyazo‐1‐thia‐4,5‐diaza‐ cyclohexa‐5‐diene (H₂L) were synthesized. Thermal behavior of these complexes was studied in dynamic nitrogen atmosphere by TA (thermogravimetric analysis), DTA (differential thermal analysis) and DTG (differential thermal gravimetry) techniques. The reaction order, the activation energies, the entropies, the enthalpies, the free energies, and the pre‐exponential factors of the thermal decomposition reactions were calculated from the thermogravimetric curves. The kinetic analysis of the thermogravimetric data was performed by using several methods such as MacCallum‐Tanner (MT), van Krevelen (vK), Madhusudanan‐Krishnan‐Ninan (MKN), Wanjun‐Yuwen‐Hen‐Cunxin (WYHC), Horowitz‐Metzger (HM) and Coats‐Redfern method (CR) based on the single heating rate. Most appropriate methods were determined for each decomposition step according to the least‐square linear regression. The Ni(II), Cu(II) Co(II) and Zn(II) complexes displayed one‐ or two‐stage decomposition pattern when heating in a dynamic nitrogen atmosphere and metal oxides remained as end products of the complexes. The characterization of the end products of the decomposition was performed by X‐ray diffraction.     

Synthesis, FT-Raman, FT-IR, NMR spectroscopic characterization and antimicrobial activity of new mixed aza-oxo-thia macrocyclic compounds

Series of new mixed aza-oxo-thia macrocyclic ligands {2,6,12,16-tetraaza-1,7,11,17-tetraoxo-9,19-dithia-[(4′-methyl-5′,4,3′)(14′-methyl-15′,14,13′)]ditriazine}cyclocosane (L ₁ ); {2,6,13,17-teraaza-1,7,12,18-tetraoxo-9,10,20,21-tetrathia-[(4′-methyl-5′,4,3′)(15′-methyl-14′,16′,15)]di-triazine}cyclodocosane (L ₂ ); {2,6,14,18-tetraaza-1,7,13,19-tetraoxo-10,22-dithia-[(4′-methyl-5′,3′,4)(16′-methyl-15′,17′,16)]ditriazine}cyclotetracosane (L ₃ ) and {2,6,15,19-tetraaza-1,7,14,12-tetraoxo-10,11,23,24-tetrathia-[(4′-methyl-5′,4,3′)(17′-methyl-8′,17,16′)]ditriazine}cyclohexa-cosane (L ₄ ) were synthesized. The structural features of the compounds have been studied by elemental analyses, Mass, FT-Raman, FT-IR, ¹H and ¹³C NMR spectroscopy. The antimicrobial activities of the ligands were evaluated using disk diffusion method in dimethyl sulfoxide as well as the minimal inhibitory concentration (MIC) dilution method, against 9 bacteria. The obtained results from disk diffusion method were assessed in side-by-side comparison with those of Penicillin-g, Ampicillin, Cefotaxime, Vancomycin, Oflaxacin, and Tetracyclin, well-known antibacterial agents. The results from dilution procedure were compared with Gentamycin as antibacterial and Nystatin as antifungal. The antifungal activities are reported on five yeast cultures namely Candida albicans, Kluyveromyces fragilis, Rhodotorula rubra, Debaryomyces hansenii, and Hanseniaspora guilliermondii, and the results are referenced with Nystatin, Ketaconazole, and Clotrimazole, commercial antifungal agents. In most cases, the compounds show strong antifungal activity in the comparison tests.     

Improving weighted information criterion by using optimization

Although artificial neural networks (ANN) have been widely used in forecasting time series, the determination of the best model is still a problem that has been studied a lot. Various approaches available in the literature have been proposed in order to select the best model for forecasting in ANN in recent years. One of these approaches is to use a model selection strategy based on the weighted information criterion (WIC). WIC is calculated by summing weighted different selection criteria which measure the forecasting accuracy of an ANN model in different ways. In the calculation of WIC, the weights of different selection criteria are determined heuristically. In this study, these weights are calculated by using optimization in order to obtain a more consistent criterion. Four real time series are analyzed in order to show the efficiency of the improved WIC. When the weights are determined based on the optimization, it is obviously seen that the improved WIC produces better results.