A theory of nonvertical triplet energy transfer in terms of accurate potential energy surfaces: the transfer reaction from pi,pi* triplet donors to 1,3,5,7-cyclooctatetraene

Triplet energy transfer (TET) from aromatic donors to 1,3,5,7-cyclooctatetraene (COT) is an extreme case of "nonvertical" behavior, where the transfer rate for low-energy donors is considerably faster than that predicted for a thermally activated (Arrhenius) process. To explain the anomalous TET of COT and other molecules, a new theoretical model based on transition state theory for nonadiabatic processes is proposed here, which makes use of the adiabatic potential energy surfaces (PES) of reactants and products, as computed from high-level quantum mechanical methods, and a nonadiabatic transfer rate constant. It is shown that the rate of transfer depends on a geometrical distortion parameter gamma=(2g(2)/kappa(1))(1/2) in which g stands for the norm of the energy gradient in the PES of the acceptor triplet state and kappa(1) is a combination of vibrational force constants of the ground-state acceptor in the gradient direction. The application of the model to existing experimental data for the triplet energy transfer reaction to COT from a series of pi,pi(*) triplet donors, provides a detailed interpretation of the parameters that determine the transfer rate constant. In addition, the model shows that the observed decrease of the acceptor electronic excitation energy is due to thermal activation of C=C bond stretchings and C-C bond torsions, which collectively change the ground-state COT bent conformation (D(2d)) toward a planar triplet state (D(8h)).     

Production of palladium nanoparticles supported on multiwalled carbon nanotubes by gamma irradiation

Palladium nanoparticles were produced and supported on multiwalled carbon nanotubes (MWCNT) by gamma irradiation. A solution with a specific ratio of 2:1 of water-isopropanol was prepared and mixed with palladium chloride and the surfactant sodium dodecyl sulfate (SDS). The gamma radiolysis of water ultimately produces Pd metallic particles that serve as nucleation seeds. Isopropanol is used as an ion scavenger to balance the reaction, and the coalescence of the metal nanoparticles was controlled by the addition of SDS as a stabilizer. The size and distribution of nanoparticles on the carbon nanotubes (CNT) were studied at different surfactant concentrations and radiation doses. SEM, STEM and XPS were used for morphological, chemical and structural characterization of the nanostructure. Nanoparticles obtained for doses between 10 and 40 kGy, ranged in size 5-30 nm. The smaller nanoparticles were obtained at the higher doses and vice versa. Histograms of particle size distributions at different doses are presented.     

Radiation-assisted synthesis of iridium and rhodium nanoparticles supported on polyvinylpyrrolidone

The controlled synthesis of rhodium (Rh) and iridium (Ir) nanoparticles was carried out by gamma irradiation of aqueous solutions containing the metal precursor salt and polyvinylpyrrolidone (PVP). The nanoparticles were synthesized at various PVP and precursor concentrations with absorbed doses between 20 and 60 kGy. Nanoparticles with average sizes of 2.4 and 2.6 nm and narrow particle size distributions were obtained at metal precursor/PVP concentrations of 6/0.3 and 6/3 mM for Ir and Rh when irradiated at 60 kGy. The interaction of the nanoparticles surfaces with the PVP was studied.     

Acid Exfoliation of Imine‐linked Covalent Organic Frameworks Enables Solution Processing into Crystalline Thin Films

Covalent organic frameworks (COFs) are highly modular porous crystalline polymers that are of interest for applications such as charge‐storage devices, nanofiltration membranes, and optoelectronic devices. COFs are typically synthesized as microcrystalline powders, which limits their performance in these applications, and their limited solubility precludes large‐scale processing into more useful morphologies and devices. We report a general, scalable method to exfoliate two‐dimensional imine‐linked COF powders by temporarily protonating their linkages. The resulting suspensions were cast into continuous crystalline COF films up to 10 cm in diameter, with thicknesses ranging from 50 nm to 20 μm depending on the suspension composition, concentration, and casting protocol. Furthermore, we demonstrate that the film fabrication process proceeds through a partial depolymerization/repolymerization mechanism, providing mechanically robust films that can be easily separated from their substrates.     

Synthesis, characterization and radiolytic properties of bis(oxalato)borate containing ionic liquids

Previously unreported bis(oxalato)borate (BOB) ionic liquids (ILs) containing imidazolium, pyridinium, and pyrrolidinium cations were prepared from the corresponding halide salts by reaction with sodium bis(oxalato)borate (NaBOB), and their properties are reported. Pulse radiolysis experiments revealed that the BOB anion scavenges solvated electrons with rate constants of 3×10⁸ M⁻¹ s⁻¹ in the ionic liquid C₄mpyrr NTf₂ and 2.8×10⁷ M⁻¹ s⁻¹ in water. This reactivity indicates that BOB ILs may be too sensitive to be used as neat solvents for nuclear separations processes in high radiation fields but may still be useful for preventing criticality while processing relatively “cold” fissile actinides.     

Chemical details on nucleolipid supramolecular architecture: molecular modeling and physicochemical studies

Nucleolipids are currently under investigation as vectors for oligonucleotides (ON) delivery thanks to their supramolecular organization properties and their ability to develop specific interactions (i.e., stacking and potential Watson and Crick hydrogen bonds) for lipoplexes formation. To investigate the factors that govern the interaction events at a molecular level and optimize nucleolipid chemical structures, physicochemical experiments (tensiometry, AFM, BAM, and ellipsometry) combined with molecular dynamics simulation were performed on a series of zwitterionic nucleolipids (PUPC, DPUPC, PAPC) featuring a phosphocholine chain (PC). After construction and initial equilibration, simulations of pure nucleolipid bilayers were run for 100 ns at constant temperature and pressure, and their properties were compared to experimental data and to natural dipalmitoylphosphatidylcholine (DPPC) bilayers. Nucleolipid-based membranes are significantly more ordered and compact than DPPC bilayers mainly due to the presence of many intermolecular interactions between nucleoside polar heads. The hydrophilic phosphocholine moieties connected to the 5' hydroxyls are located above the bilayers, penalizing nucleic bases accessibility for further interactions with ON. Hence, a neutral nucleolipid (PUOH) without hydrophilic phosphocholine was inserted in the membranes. Simulations and experimental analysis of nucleolipid membranes in interaction with a single strand RNA structure indicate that PUOH interacts with ON in the subphase. This study demonstrates that molecular modeling can be used to determine the interactions between oligonucleotide and nucleolipids.     

Organization of beta-cyclodextrin under pure cholesterol, DMPC, or DMPG and mixed cholesterol/phospholipid monolayers

The complexation of beta-cyclodextrin with monolayers of cholesterol, DMPC, DMPG, and mixtures of those lipids has been studied using Brewster microscopy, PMIRRAS, and ab initio calculations. An oriented channel-like structure of beta-cyclodextrin, perpendicular to the air/water interface, was observed when some cholesterol molecules were present at the interface. This channel structure formation is the first step in the cholesterol dissolution in the subphase. With pure DMPC and DMPG monolayers, weaker, less organized complexes are formed, but they disappear almost completely at high surface pressure, and only a small amount of phospholipid is dissolved in the subphase.     

Brewster angle microscopy and PMIRRAS study of DNA interactions with BGTC, a cationic lipid used for gene transfer

The lipid bis(guanidinium)-tris(2-aminoethyl)amine-cholesterol (BGTC) is a cationic cholesterol derivative bearing guanidinium polar headgroups which displays high transfection efficiency in vitro and in vivo when used alone or formulated as liposomes with the neutral colipid 1,2-di-[ cis-9-octadecenoyl]- sn-glycero-3-phosphoethanolamine (DOPE). Since transfection may be related to the structural and physicochemical properties of the self-assembled supramolecular lipid-DNA complexes, we used the Langmuir monolayer technique coupled with Brewster angle microscopy (BAM) and polarization modulation infrared reflection absorption spectroscopy (PMIRRAS) to investigate DNA-BGTC and DNA-BGTC/DOPE interactions at the air/water interface. We herein show that BGTC forms stable monolayers at the air/water interface. When DNA is injected into the subphase, it adsorbs to BGTC at 20 mN/m. Whatever the (+/-) charge ratio of the complexes used, defined as the ratio of positive charges of BGTC in the monolayer versus negative charges of DNA injected in the subphase, the DNA interacts with the cationic lipid and forms either an incomplete (no constituent in excess) or a complete (DNA in excess) monolayer of oriented double strands parallel to the lipid monolayer plan. We also show that, under a homogeneous BGTC/DOPE (3/2) monolayer at 20 mN/m, DNA adsorbs homogeneously to form an organized but incomplete layer whatever the charge ratio used (DNA in default or in excess). Compression beyond the collapse of these mixed DNA-BGTC/DOPE systems leads to the formation of dense DNA monolayers under an asymmetric lipid bilayer with a bottom layer of BGTC in contact with DNA and a top layer mainly constituted of DOPE. These results allow a better understanding of the mechanisms underlying the formation of the supramolecular BGTC-DNA complexes efficient for gene transfection.