Characterization of Metallo Bis(terpyridine) Diblock Polymers by Nonaqueous Capillary Zone Electrophoresis

A method of nonaqueous capillary zone electrophoresis (CZE) has been developed to characterize block (co)polymers of poly(ethylene oxide) and poly(styrene) containing metallo bis(terpyridine) complexes as bridging units. Specific CZE separation conditions had to be applied, with barium perchlorate dissolved in N-methylformamide (NMF) as background electrolyte and OV-1701-OH deactivated capillaries. For detection UV absorption was measured at a wavelength of 316 nm. Metallo diblock polymers with molecular weights up to 30,000 Da could be analyzed by the proposed nonaqueous CZE method. Experiments performed with polymeric compounds containing Fe, Ni or Ru as central metal ions showed that their electrophoretic mobilities were independent of the type of metal ion. Therefore, the data on the size of the polymeric compounds could be obtained using just one set of calibration standards. Polydispersities of the samples calculated from the experimental results were in correlation with the polydispersities of the polymers used in the synthesis of the metallo diblock polymers. Several polymeric samples contained metallo mono(terpyridine) complexes as impurities. These by-products could be separated from the main product. With symmetrical diblock polymers only one by-product was detected, while with an asymmetric diblock polymer two types of mono-complexes were found. The amount of the mono-complexes present as impurities was dependent on the type of central metal ion (Ni > Fe >> Ru).     

The effects of the column pressure drop on retention and efficiency in packed and open tubular supercritical fluid chromatography

The effects of the pressure drop across the column on retention and efficiency in SFC have been studied. Numerical methods are described which enable the prediction of hold-up time and pressure drop in both packed and open tubular columns. Predictions of both hold-up time and pressure drop are in good agreement with experimental data. The density gradient along the column can be calculated using the numerical methods and a procedure is described which enables the calculation of the overall capacity factors of the solutes from the density profile in the column. Significant variations of the capacity factor are observed along the column. The effect of the density gradient along the column on local diffusivity and dispersion is studied. The column efficiency in systems with significant pressure drops is affected by changes in: the linear velocity of the mobile phase; the diffusion coefficients; and the capacity factors of the solutes along the column. The overall efficiency of the chromatographic system can be calculated if, as is the case for open tubular columns, adequate plate height equations are available.     

Breakthrough of polymers in interactive liquid chromatography

Two separate peaks are observed for narrow polymer standards in both isocratic and gradient HPLC. One peak appears around the solvent front (the "solvent-plug peak" or "breakthrough peak"), whereas the second peak is retained significantly--or even highly. Although the effect has been observed many times before, it has never been rigorously explained. In this paper we provide a detailed explanation for the breakthrough peak. The two completely separate peaks are demonstrated not to represent to different fractions of the sample (e.g., the low- and high-molecular-mass parts of the distribution). Both peaks are representative of the entire polymeric sample for narrow polymer standard. Because the amount of the polymer in the breakthrough peak may vary, the quantitative analysis of the polymers by LC is jeopardized. The effects of the sample solvent, the (initial) mobile phase composition, the injection volume, the injected sample concentration, the column temperature, and the analyte structure and molecular mass on the breakthrough peak were investigated in LC experiments involving standards of polystyrene and poly(methyl methacrylate). Three necessary and sufficient conditionsare suggested for the breakthrough phenomenon to be observed. Recommendations to avoid the breakthrough phenomenon are given, culminating in a structured method for selecting the best possible sample solvents.     

Molar mass distributions by gradient liquid chromatography: predicting and tailoring selectivity

Interactive liquid chromatography (iLC) for polymer analysis is usually applied to the characterisation of distributions other than molar mass. In particular, its use for the determination of chemical-composition, functionality-type and tacticity distributions has been demonstrated. The application of iLC for the determination of molar mass distributions (MMDs), however, has not yet been fully explored. An expanded version of the reversed-phase liquid chromatography model has been developed to describe and predict how the retention behaviour of polydisperse polystyrene samples changes with molar mass. The relationship between molar mass and the parameters of the model has been investigated in some detail and non-linear correlations were found. From the model and the relationships between the model parameters and molar mass, calibration curves (retention time versus molar mass) were constructed to predict changes in chromatographic selectivity across a given molar mass range. These calibration curves were compared to experimentally obtained curves and, in most cases, excellent agreement was found. The dramatic enhancement in selectivity that can be obtained with iLC in comparison to size-exclusion chromatography (SEC) was illustrated by measuring matrix-assisted laser desorption ionisation (MALDI) MS spectra of fractions collected during a gradient-LC separation. In the low-molar mass range, essentially monodisperse fractions were obtained. Calibration curves, predicted by the model and validated experimentally using narrow-dispersity standards and MALDI-MS spectra of fractions, were used to determine the molar mass distribution of some narrowly distributed polystyrene samples. Molar mass distributions for such standards were found to be somewhat lower than the values reported by the manufacturers. The results also deviated from those obtained by MALDI-MS.     

Optimisation of the chlorthalidone chiral separation by capillary electrochromatography using an achiral stationary phase and cyclodextrin in the mobile phase

The separation of chlorthalidone enantiomers in capillary electrochromatography on an achiral stationary phase when adding a chiral selector, hydroxypropyl-β-cyclodextrin, to the mobile phase, was optimised. The goal was to investigate the feasibility of modelling retention times and resolution when during the optimisation procedure regular replacement of columns is required due to their fragility. Therefore, it is essential that the packing procedure delivers reproducible columns. The optimisation of an existing chlorthalidone separation was chosen as case study. The influence of two factors, chiral selector concentration and organic modifier content, on the responses was modelled. The experiments performed prior to modelling were defined by a central composite design. Results on different columns, obtained under identical experimental conditions, were found comparable and thus modelling was possible in situations where several columns were required to complete a design. A second-order polynomial model was built for both responses. Optimal separations were also predicted using Derringer’s desirability functions. The optimum was found at 33 mM cyclodextrin and 16% (v/v) acetonitrile on two types of columns (with different packing times) leading to a strong reduction in analysis time for an equally good separation compared to the initial conditions. Measured and predicted responses were found comparable, indicating that acceptable models were obtained.     

Contactless conductivity detection of synthetic polymers in non-aqueous size-exclusion electrokinetic chromatography

A capacitively coupled contactless conductivity detection (CCD) system has been applied for the detection of neutral synthetic polymers in capillary size-exclusion electrokinetic chromatography (SEEC). Polystyrene standards, that were used as a model compounds, were separated on a capillary column packed with porous 10 microm silica particles with an electrokinetically driven mobile phase, and detected by CCD and UV detection simultaneously. Mass-calibration curves for polystyrene were constructed. Satisfactory results were obtained for the linearity, the run-to-run repeatability (<0.2% for the relative retention and <4% for the peak area) and the robustness of the detector. One of the major issues in this preliminary study was to investigate the origin of the peaks observed for the polystyrene standards. The effect of the molar mass of the polystyrenes on the sensitivity was small. Therefore, the signals obtained could not be explained as the result of an increased viscosity and a decreased solution conductivity of the solute zone. An alternative hypothesis is suggested, and recommendations for further research are given.     

Compehensive two-dimensional gas chromatography (GC×GC) and its applicability to the characterization of complex (petrochemical) mixtures

In general, petrochemical products contain only a limited number of chemical classes of compounds (sample dimensionality). The enormous number of individual components within these classes, however, soon puts limitations upon a single chromatographic technique when it comes to adequate characterization of these products. Comprehensive two-dimensional gas chromatography (GC×GC) clearly opens the possibility of estimating the composition of hydrocarbon mixtures in a far more detailed fashion than hitherto possible. Although the emphasis of papers of GCxGC thus far almost exclusively applies to the unsurpassed peak-capacity, in the oil industry there is a need for characterization, rather than for analyzing all the individual compounds. In principle a GCxGC system can provide an almost perfect match between its intrinsic properties and the dimensionality of oil samples. To establish the applicability of GCxGC towards petrochemical analytical challenges, a commercially aavailable prototype instrument was subjected to an exhaustive characterization of a typical hydrocarbon precess stream and a fast characterization of a light gas oil. Although there are no fundamental limitations towards the quantitative aspects of a GCxGC system, this paper confines itself to qualitative results only. Quantitative aspects of GCxGC will be published in a forthcoming paper.     

Comprehensive two-dimensional liquid chromatography for the characterization of functional acrylate polymers

Comprehensive two-dimensional liquid chromatography-size-exclusion chromatography (LC x SEC) was investigated as a tool for the characterization of functional poly(methyl methacrylate) (PMMA) polymers. Ultraviolet-absorbance and evaporative light-scattering detection (ELSD) were used. A simple method to quantify ELSD data is presented. Each data point from the ELSD chromatogram can be converted into a mass concentration using experimental calibration curves. The qualitative and quantitative information obtained on two representative samples is used to demonstrate the applicability of LC x SEC for determining the mutually dependent molar-mass distributions (MMD) and functionality-type distributions (FTD) of functional polymers. The influence of the molar mass on the retention behavior in LC was investigated using LC x SEC for hydroxyl-functional PMMA polymers. The critical conditions, at which retention is--by definition--independent of molar mass, were not exactly the same for PMMA series with different end-groups. Our observations are in close agreement with theoretical curves reported in the literature. However, for practical applications of LC x SEC it is not strictly necessary to work at the exact critical solvent composition. Near-critical conditions are often sufficient to determine the mutually dependent distributions (MMD and FTD) of functional polymers.     

Expert systems for method development and validation in HPLC

ESCA, Expert Systems Applied to Chemical Analysis, started its research in March 1987, with the aim of building prototype expert systems for HPLC method development. Results of this research have been published as the work has progressed. The project is now completed and this paper summarises some of the overall project conclusions. Seven different expert systems have been built which tackle problems throughout the process of method development, four stand-alone systems and three integrated systems. The object of ESCA was to evaluate the applicability of expert system technology to analytical chemistry and not all the systems were built for commercial uses. Many of the systems tackle problems specific to one or more of the partners and thus may not be useful outside this environment. However, the results of the work are still pertinent to analysts wishing to build their own systems. These results are described, however, the emphasis of the paper is on those systems developed for method validation.Method validation for HPLC is a complex task which requires many characteristics of the method to be tested, e.g. accuracy, precision, etc. The expert systems built within ESCA concern the validation of precision. Two systems were developed for repeatability testing and ruggedness testing. The method validation process can be divided into several discrete stages, these include: (1) The selection of the method feature to test, for instance which factors can influence the ruggedness of a method. (2) The definition of a test procedure, for instance an efficient statistical design. (3) The execution of experiments and the interpretation of results. (4) A diagnosis of any observed problem. This paper describes these two systems in some detail and summarises some of the results obtained from their evaluation. It concludes that expert systems can be useful in solving analytical problems and the integration of several expert systems can provide extremely powerful tools for the analyst.