Phase Conjugation in Saturable Absorbing Dye Films by Degenerate Four-Wave Mixing and Holographic Processes Using Nanosecond Pulse and CW Lasers

We report on the simultaneous generation of phase-conjugate signals by degenerate four-wave mixing (DFWM) and holographic processes using a nanosecond pulse and a CW lasers in polyvinyl alcohol (PVA) films doped with four kinds of saturable absorbing dyes. For the pulse laser, of the four kinds of dye-doped PVA films, the erythrosine B-doped PVA and uranine doped-PVA films generate PC signals only by the DFWM process, while the other dye-doped PVA films generate PC signals simultaneously by not only the DFWM process but also the holographic process. Especially, the safranin T-doped PVA film generates strong PC signals by the holographic process. In contrast, all of the dye-doped PVA films generate the two types of PC signals for the CW laser. The fading of dye molecules is found to result in the generation of the holographic component of PC signals which governs the temporal behavior of the total PC signals.     

Keratinized epithelial transport of beta-blocking agents. I. Relationship between physicochemical properties of drugs and the flux across rat skin and hamster cheek pouch.

The maximum fluxes (Jmax) of beta-blockers through keratinized membranes were determined in vitro and compared with their physiochemical parameters such as lipophilicity (log k'0) and melting point (mp). Rat abdominal skin and hamster cheek pouch mucosa were used as the model membranes. Propranolol, metoprolol, timolol, pindolol, nadolol and agenolol were used as beta-blockers with a variety of physicochemical characters. Linear relations of Jmax with either log k'0 or mp were observed both in intact rat skin and in intact hamster cheek pouch, suggesting that the lipophilicity and thermodynamic activity of a drug in the crystal state primarily affect the drug's permeation through these membranes. However, the slope, dJmax/d(log k'0), for cheek pouch mucosa was greater than that for rat skin, corresponding to the lack of appendigeal shunt pathways in cheek pouch. Penetration studies using the delipidized membranes and the isolated stratum corneum sheet of hamster cheek pouch mucosa clarified that the primary rate-limiting barrier function might exist in the lipid layer of the stratum corneum. Jmax values for the tape-stripped and delipidized skins correlated with both the solubilities of drugs in the vehicle and with the mp, suggesting the polar porous characteristics of both model membranes. However, a theoretical approach confirmed that the contribution of an intracellular or aqueous pore route in the intact membrane to the permeation of drugs with positive lipophilic indexes is negligible.     

Imprinting by hot embossing in polymer substrates using a template of silica glass surface-structured by the ablation of LIBWE method

Laser-induced backside wet etching (LIBWE) of silica glass plates was performed to fabricate an imprinting template for hot embossing in polymer substrates such as polystyrene and silicone resin. Well-defined inverse surface-micropatterns of gratings and grid arrays on the substrates were produced by the hot embossing using a surface-structured silica glass as the template. These results indicate that the LIBWE method allows us to generate robust glass molding tools that exhibit the inverse shapes of the intended microstructures. PACS 52.38.Mf; 68.47.Mn; 81.05.Kf; 81.05.Lg; 83.50.Uv     

WIDE RANGE DETECTOR USING PARABOLIC CYLINDRICAL MIRROR FOR THz APPLICATIONS

A new, wide-band, high-speed and high-sensitivity THz detector has been developed. The prototype detector consists of a parabolic cylindrical mirror, a long wire antenna and a Schottky barrier diode. Direct detection measurements have shown a stable sensitivity of 150 ± 50 V/W for 1–2 THz without any adjustments. The long wire antenna was fixed at the focus of parabolic cylindrical mirror then it has been realized less operation steps, easy coupling to the external THz signals and a dramatic enhancement in the practicality of this system. The optically polished mirror and frosted surface one showed comparable sensitivities, thus easy polishing and less cost mirror fabrication can be applied for this system. The radiation pattern showed a maximum radiation angle of approximately 23° with its dominant main lobe, which was attributed to the wire antenna character and confirmed good agreements with classical antenna theory.     

Polymers having stable radicals. II. Synthesis of nitroxyl polymers from 4-methacryloyl derivatives of 1-hydroxy-2,2,6,6-tetramethylpiperidine

Polymers having stable pendant . radicals were synthesized through their precursor polymers by oxidizing them in air or by H₂O₂–Na₂WO₄. Hydrochlorides and sulfates of 4-methacryloylamino- and 4-methacryloyloxy-1-hydroxy-2,2,6,6-tetramethylpiperidines were synthesized as precursor monomers and polymerized by using α,α′-azobisisobutyronitrile under appropriate conditions to precursor polymers of high molecular weight: poly-4-methacryloylamino-/oxy-1-hydroxy-2,2,6,6-tetramethylpiperidinehydrochlorides and sulfates. The precursor polymers were converted to polymers having nitroxyl stable radicals, i.e., poly-4-methacryloylamino-/oxy-2,2,6,6-tetramethylpiperidine-1-oxyls, by oxidation in air or with H₂O₂–Na₂WO₄ without any main-chain scission. The structure of the resultant stable radical polymers was determined by infrared, ultraviolet, and ESR spectroscopy. Based on the results of spectroscopic analysis and Kjeldahl analysis, the transformation from precursors to nitroxyl stable radical polymers was found to be quantitative. Investigations on the applicability of polymeric nitroxyl radicals to oxidation-reduction reactions were attempted by means of polarography; the reduction half-wave potential was found to be ?1.16 V for the mercury pool.     

X-ray structural study of a zinc(II) inclusion complex of a phenolate-pendant cyclam

The molecular structure of phenol-pendant cyclam-zinc(II) complex,4a, has been determined by X-ray structure analysis. Crystals of4a · ClO₄ · CH₃OH (C₁₆H₂₇N₄OZn · ClO₄ · CH₃OH) are monoclinic, space groupP2₁/nn, with four molecules in the unit cell of dimensionsa=31.198(2) Å,b=8.426(1) Å,c=8.214(1) Å, and=93.96(1)°. The structure was solved by the heavy atom method and refined anisotropically toR=0.044,R _w=0.062 for 1551 independent reflections. The complex assumes a five-coordinate, square pyramidal geometry, where zinc(II) is surrounded by the cyclam moiety in a planar fashion with the pendant phenolate anion occupying an axial position. An extremely short Zn-O(phenolate) bond distance of 1.983(5) Å, in conjunction with the 0.288 Å displacement of Zn(II) above the cyclam N₄ plane toward the phenolate, accounts for the extremely low pK _a value of 5.8 for the pendant phenol. These facts about4a, in comparison with the previous findings for the Ni(II) (4b) and Cu(II) complexes (4c) with the same ligand, illustrate well the characteristics of zinc(II) ion coordination properties.This paper is dedicated to the memory of the late Dr C. J. Pedersen.     

Syntheses of polyurethanes derived from oximes and their photodegradation

Polyoxime-urethanes have been synthesized from dioximes and diisocyanates, and their structures have been ascertained by elemental analysis and infrared spectroscopy. They can be represented by the general formula: These polymer films were photolyzed by using a high-pressure 100-W mercury lamp, and the rate of decomposition of the N? O bond was determined by use of ultraviolet and infrared spectra, or comparing the photochemical behavior with that of corresponding model compounds. Upon irradiating these polymers in the presence or absence of sensitizers or a hydrogen donor, there were obtained photolyzed polymers of low molecular weight, of which the molecular weights were estimated by observing the viscosity changes. To deduce the mechanism of photodegradation of polyoxime-urethane, photolysis of benzophenone oxime-phenyl urethane was investigated as a model compound.     

Structure elucidation and complete NMR spectral assignments of a new taxane glycoside from the needles of Taxus cuspidata

A new taxane glycoside was isolated from a methanol extract of the needles of Taxus cuspidata. The structure was established as 2alpha,9alpha,10beta-triacetoxytaxa-4(20),11-dien-13-one-5alpha-O-beta-D-glucopyranoside (1) on the basis of 1D- and 2D NMR and high-resolution fast atom bombardment mass spectral analyses.     

Effect of TRX-liposomes size on their prolonged circulation in rats

Newly formulated cationic liposomes (TRX-liposomes) with four different mean diameters were injected into twelve male rats via the lateral tail vein in order to evaluate the effect of liposomal size on pharmacokinetic parameters. TRX-liposomes disappeared from the blood according to the one-compartment model and demonstrated maximum and minimum half-lives of ca. 14 h (mean diameter of 114.3 nm) and ca. 5 h (mean diameter of 285.9 nm), respectively. This prolonged half-life tended to decrease at the boundary of 114.3 nm mean diameter. The optimal size (114.3 nm) for prolonged circulation of TRX-liposomes was consistent with that of pegylated liposomes such as Doxil((R)), however, the half-life was different among these liposomes. The electric charge of the TRX-liposomal surface is assumed to be responsible for this difference. The results of the present study will be very useful in the design of long-circulating cationic liposomes.