Flow-injection determination of 3-hdroxybutyrate in serum with an immobilized 3-hydroxybutyrate dehydrogenase reactor and chemiluminescence detection

A flow-injection system for the determination of 3-hydroxybutyrate in serum is described. 3-Hydroxybutyrate dehydrogenase is immobilized on poly(vinyl alcohol) beads and incorporated in a flow-injection system. 1-Methoxy-5-methylphenazinium methylsulphate reacts with enzymatically generated NADH to give H₂O₂, which is detected chemiluminometrically with the reaction of luminol and hexacynoferrate(III). Serum is diluted and filtered through an ultrafiltration membrane. The system responds linearly to injected samples (80 μl) in the concentration range 0.5–300 μM; the detection limit is 0.1 μM. The within-day relative standard deviation (n = 90) for 58 μM 3-hydroxybutyrate in serum is 0.8%. The maximum throughout is 20 samples per hour. The immobilized enzyme is stable for at least 1 month.     

Structural and electrical properties of crystalline (1−x)Ta2O5−xTiO2 thin films fabricated by metalorganic decomposition

Polycrystalline (1−x)Ta₂O₅−xTiO₂ thin films were formed on Si by metalorganic decomposition (MOD) and annealed at various temperatures. As-deposited films were in the amorphous state and were completely transformed to crystalline after annealing above 600 °C. During crystallization, a thin interfacial SiO₂ layer was formed at the (1−x)Ta₂O₅−xTiO₂/Si interface. Thin films with 0.92Ta₂O₅–0.08TiO₂ composition exhibited superior insulating properties. The measured dielectric constant and dissipation factor at 1 MHz were 9 and 0.015, respectively, for films annealed at 900 °C. The interface trap density was 2.5×10¹¹ cm⁻² eV⁻¹, and flatband voltage was −0.38 V. A charge storage density of 22.8 fC/μm² was obtained at an applied electric field of 3 MV/cm. The leakage current density was lower than 4×10⁻⁹ A/cm² up to an applied electric field of 6 MV/cm.     

Application of water as a solvent in microwave-assisted extraction for analysis of PCBs and CBzs in fly ash

Polychlorinated biphenyls (PCBs) and chlorobenzenes (CBzs) are two classes of dioxin precursors formed in municipal solid waste incinerators (MSWIs); they produce negative health effects similar to those of dioxins. Reducing the analytical time required for determining the concentrations of these compounds in MSWIs is important for quickly evaluating their importance and assessing associated health risks. In the present study, water is used as a safe and environmentally friendly solvent in microwave-assisted extraction (MAE) for PCB and CBz analyses. MAE is compared with traditional Soxhlet extraction (SE) to determine the extraction efficiencies. The evaluation of extraction efficiencies shows that MAE has a high extraction efficiency compared with that of SE when water content is lower than 60%. Furthermore, the extraction time and organic solvent consumption are reduced with MAE compared with SE.     

A new strategy for construction of eight-membered carbocycles by Brook rearrangement mediated [6 + 2] annulation

[reaction: see text] A newly developed strategy for construction of eight-membered carbocycles via [6 + 2] annulation that involves the combination of beta-alkenoyl acylsilanes and a vinyllithium derivative is described. A unique feature of this annulative approach is that it enables in one operation and a stereoselective manner construction of eight-membered ring systems containing useful functionalities for further synthetic elaboration from readily available six- and two-carbon components.     

Cidep study of radical-ion pair systems: Photooxidation reactions of carbazoles by maleic anhydride in alcohol solution

Photooxidation (charge transfer) reactions of carbazole derivatives by maleic anhydride (MA) in alcoholic media are studied by a time-resolved cw-ESR (TRESR) and Fourier transform ESR (FTESR) techniques. The CIDEP spectra observed in the systems (methyl-, ethyl-, and phenyl-substituted carbazoles with MA) remarkably depend on the MA concentration. Under the high concentration conditions, an emissive TM (triplet mechanism) polarization with a slight A/E (absorption/emission) pattern of the RPM (radical pair mechanism) is observed. In the low concentration of MA, a TM-like absorptive polarization is superimposed on the A/E pattern of the RPM. Since this reaction takes place exclusively through the triplet state, this spectral phase reveals that the singlet state of the radical-ion pair (RIP) has an energy higher than that of the triplet state, in other words, the sign of the apparent exchange interaction of the present RIP systems is positive. The total absorptive polarization observed in the low concentration of MA is tentatively explained by the polarization transfer from the excited triplet state of carbazoles in thermal equilibrium.     

Alkenyl- and aryl[2-(hydroxymethyl)phenyl]dimethylsilanes: an entry to tetraorganosilicon reagents for the silicon-based cross-coupling reaction

Alkenyl- and aryl[2-(hydroxymethyl)phenyl]dimethylsilanes, highly stable tetraorganosilicon reagents, are found to react with aryl and alkenyl iodides in the presence of a palladium catalyst and K2CO3 as a base, significantly milder conditions compared with those ever reported for the silicon-based cross-coupling reactions. The reaction tolerates a wide range of functional groups, including silyl protectors, and allows a gram-scale synthesis to recover and reuse the silicon residue.     

Thermal decomposition of vinylacetylene in shock waves

The thermal decomposition of vinylacetylene (C₄H₄) was studied behind reflected shock waves using both a single-pulse method (reaction time between 0.8 and 3.3 ms) and a time-resolved UV-absorption method (230 nm). The studies were done over the temperature range of 1170–1690 K at the total pressure range of 1.3–2.3 atm. The mechanism was used to interpret both the early and late stages of vinylacetylene decomposition at the high temperatures. It was confirmed that C₄H₄ dissociation proceeded through the following three channels. The rate constant expression of reaction (1) was determined as k₁ = 6.3 × 10¹³ exp(?87.1 kcal/RT) s^?1. The rate constants of the succeeding reactions (chain reaction, C₄H₄ + H → i-C₄H₃ + H₂ and C₄H₄ + H → C₂H₂ + C₂H₃ and decomposition reactions of free radicals, i-C₄H₃ + M → C₄H₂ + H + M) were confirmed or estimated. © John Wiley & Sons, Inc.     

Hydration structure around a non-electrolyte molecule as revealed by monte carlo calculation: have you seen the “iceberg”?

Monte Carlo calculations have been carried out for pure water and an infinitely dilute aqueous solution of methanol at 298.15 K at ordinary density by the Metropolis method in NTV ensemble. The hydration structure around methanol revealed by a graphic display technique indicates a structure-forming effect near the hydrophobic group.     

Synthesis of porphyrin-introduced silica gels by sol-gel process

Using a hydroxyl group appended free base porphyrin derivative (HP), porphyrin-introduced silica gels were synthesized by a sol-gel process. The HP content in the materials linearly increased with increasing the HP concentration. Meanwhile, free base tetraphenylporphyrin (TPP) with no hydroxyl groups were almost not incorporated into the silica gels. These facts suggested that the interaction between hydroxyl groups of the HP molecules and silica network is considerably strong. The UV-vis characters of HP-introduced materials were almost the same as pure HP molecules. The Beer's plot indicated that the HP molecules in the materials are dispersed.     

Determination of chemical form of antimony in contaminated soil around a smelter using X-ray absorption fine structure.

Only limited information is available about the behavior of antimony (Sb) in contaminated soils. However, understanding the behavior of Sb in contaminated soils is important, because the toxicity or solubility of this element depends on its chemical state. In this study, we investigated the levels of Sb and the chemical forms of Sb in the soil around a smelter using X-ray absorption fine structure (XAFS) spectra. The highest Sb concentration in the contaminated soil was 2900 mg/kg dry soil. According to Sb-K edge X-ray absorption near edge (XANE) spectra, the Sb in the soil was in the form of Sb(V) compounds. The similarity of extended XAFS (EXAFS) spectra suggests that Sb speciation was independent of the sampling site, which indicates that Sb or Sb2O3 emitted from the smelter was converted into Sb(V) compounds in the soil.