Comparison of Several Calibration Procedures for Glass Electrodes in Proton Concentration

Several reported procedures for calibrating glass electrodes in proton concentration are compared. Some recommendations for non-experts are also given. The examined procedures can be classified into two broad categories, namely: those based on direct potential difference measurements of solutions of known proton concentration and those that use one or several pH standards to calibrate the electrode and subsequently measure the pH of solutions containing known proton concentrations. With a single buffer, the two types of procedures lead to equivalent results. However, if two pH buffers are used, the slope of the calibration graph in proton concentration will differ from the real electrode slope to an extent proportional to the difference between the liquid junction potentials of the two buffers. Therefore, any other method is preferable under these circumstances.     

The ionization constants of alpha-alanine in NaCl at 25 degrees. Effect of the ionic strength based on three models

In the present work we obtained the experimental pKs of the amino acid alpha-alanine in NaCl at 25 degrees and different ionic strengths. The equilibrium constants have been potentiometrically determined with a commercial glass electrode and the results analysed through three models: two directly based on the Pitzer and Scatchard approaches to the ion specific interaction theory and the other based on a simpler modification of the Debye-Hückel equation. The three models fit the data reasonably well and the extrapolated pK values obtained show a good agreement. The goodness of the ridge regression method cannot be probed in this case.     

Radical copolymerization of 2-acryloyl thioxanthone with methyl methacrylate

A novel monomer, 2-acryloyl thioxanthone (TXA), was prepared by reaction of 2-hydroxy thioxanthone with acryloyl chloride. Copolymerization of TXA with methyl methacrylate (MMA) in DMF at 80°C was studied in order to evaluate relative reactivities of these monomers. Values of 1.36 and 0.5 were found for the respective reactivity ratios of MMA and TXA, respectively. The resonance stabilization and polar properties were determined and discussed in terms of spectroscopic data.     

Effect of ionic strength on the formal potential of the glass electrode in various saline media

We examined the variation with ionic strength (I, adjusted with KCl, KNO₃, KBr, NaCl or NaClO₄) of the formal potential (E_const) for glass electrodes exhibiting a Nernstian response (i.e. E_cell=E_const−s log [H⁺]). For this purpose, we investigated the different factors included in the formal potential, so we obtained reported values for the liquid junction potential as a function of ionic strength and determined the logarithm of the activity coefficient for the proton in various saline media, using Pitzer equations.     

Dependence of equilibrium constants ofL-valine on ionic strength according to Guggenheim,Scatchard and Pitzer models

Summary A systematic study of the dependence of acid-base stoichiometric constants on the ionic strength has been carried out for the aminoacidL-valine in ClK and BrK solutions. The observed dependence has been interpreted by using Guggenheim, Scatchard and Pitzer models for the activity coefficients of the species involved in the equilibria.

---

Die Abhängigkeit von Gleichgewichtskonstanten desL-Valin von der Ionenstärke entsprechend den Modellen von Guggenheim, Scatchard und Pitzer

Zusammenfassung Es wurde anL-Valin in KCl- und KBr-Lösungen eine systematische Studie der Abhängigkeit der Säure-Base-Stöchiometrie von der Ionenstärke durchgeführt. Die beobachteten Abhängigkeiten wurden aufgrund der nach den Modellen von Guggenheim, Scatchard und Pitzer erhaltenen Aktivitätskoeffizienten der an den Gleichgewichten beteiligten Spezies interpretiert.

     

Ablation of poly(methyl methacrylate) and poly(2-hydroxyethyl methacrylate) by 308, 222 and 193 nm excimer-laser radiation

Data on the ablation of Poly(Methyl MetAcylate) (PMMA) and Poly(2-Hydroxyethyl MetAcylate) (PHEMA) with 0%, 1% and 20% of Ethylene Glycol DiMethAcrylate (EGDMA) as crosslinking monomer by 193, 222 and 308 nm laser radiation are presented. Direct photoetching of PMMA at 308 nm is demonstrated for laser fluences ranging from 2 to 18 J/cm². The ablation rate of PHEMA is lower than the corresponding to PMMA and decreases when the amount of EGDMA increases. The determination of the absorbed energy density required to initiate significant ablation suggests that the photoetching mechanism is similar for all the polymers studied and is a function of the irradiation wavelength. The Beer-Lambert law, the Srinivasan, Smrtic and Babu (SSB) theory and the kinetic model of the moving interface are used to analyze the experimental results. It is shown that only the moving interface theory fits well the etch rate for all the selected polymers at the three radiation wavelengths.     

A multisite molecular mechanism for Baeyer-Villiger oxidations on solid catalysts using environmentally friendly H2O2 as oxidant

The molecular mechanism of the Baeyer-Villiger oxidation of cyclohexanone with hydrogen peroxide catalyzed by the Sn-beta zeolite has been investigated by combining molecular mechanics, quantum-chemical calculations, spectroscopic, and kinetic techniques. A theoretical study of the location of Sn in zeolite beta was performed by using atomistic force-field techniques to simulate the local environment of the active site. An interatomic potential for Sn/Si zeolites, which allows the simulation of zeolites containing Sn in a tetrahedral environment, has been developed by fitting it to the experimental properties of quartz and SnO2(rutile). The tin active site has been modeled by means of a Sn(OSiH3)3OH cluster, which includes a defect in the framework that provides the flexibility necessary for the interaction between the adsorbates and the Lewis acid center. Two possible reaction pathways have been considered in the computational study, one of them involving the activation of the cyclohexanone carbonyl group by Sn (1) and the other one involving hydrogen peroxide being activated through the formation of a tin-hydroperoxo intermediate (2). Both the quantum-chemical results and the kinetic study indicate that the reaction follows mechanism 1, and that the catalyst active site consists of two centers: the Lewis acid Sn atom to which cyclohexanone has to coordinate, and the oxygen atom of the Sn-OH group that interacts with H2O2 forming a hydrogen bond.     

Soluble polymers with pendant thionine groups: Synthesis and evaluation as singlet oxygen photosensitizers

Thionine ( 1 ) has been covalently bound to linear copoly(styrene-p-vinylbenzyl chloride) and to linear copoly(acrylic acid-2-ethylhexyl acrylate). The resulting polymeric dyes, purified by ultrafiltration, present quantum yields of singlet oxygen generation in dimethylformamide solution lower than their corresponding low-molecular-weight models thionine hydrochloride ( 1.HCl ) and N(3)-acetylthionine ( Ac-1 ), the decrease being more pronounced in the case of the polystyrene-dye photosensitizer. High chromophore concentrations within the volume encompassed by each macromolecule in the solution can explain this fall in efficiency. The free dyes thionine hydrochloride and its hydrolysis products thionoline ( 2 ) and thionol ( 3 ) behave as good singlet oxygen generators, with quantum yields of 0.71, 0.62, and 0.63, respectively. © 1993 John Wiley & Sons, Inc.     

Design and Sensing Properties of a Self‐Assembled Supramolecular Oligomer

Supramolecular polymers are a class of macromolecules stabilized by weak non‐covalent interactions. These self‐assembled aggregates typically undergo stimuli‐induced reversible assembly and disassembly. They thus hold great promise as so‐called functional materials. In this work, we present the design, synthesis, and responsive behavior of a short supramolecular oligomeric system based on two hetero‐complementary subunits. These “monomers” consist of a tetrathiafulvalene‐functionalized calix[4]pyrrole (TTF‐C[4]P) and a glycol diester‐linked bis‐2,5,7‐trinitrodicyanomethylenefluorene‐4‐carboxylate (TNDCF), respectively. We show that when mixed in organic solvents, such as CHCl₃, CH₂ClCH₂Cl, and methylcyclohexane, supramolecular aggregation takes place to produce short oligomers stabilized by hydrogen bonding and donor–acceptor charge‐transfer (CT) interactions. The self‐associated materials were characterized by ¹H NMR and UV/Vis/NIR absorption spectroscopy, as well as by concentration‐ and temperature‐dependent absorption spectroscopy and dynamic light scattering (DLS) analyses of both the monomeric and oligomerized species. The self‐associated system produced from TTF‐C[4]P and TNDCF exhibits a concentration‐dependent aggregation behavior typical of supramolecular polymers. Further support for the proposed self‐assembly came from theoretical calculations. The fluorescence emitting properties of TNDCF are quenched under conditions that promote the formation of supramolecular aggregates containing TTF‐C[4]P and TNDCF. This quenching effect has been utilized as a probe for the detection of substrates in the form of anions (i.e., chloride) and nitroaromatic explosives (i.e., 1,3,5‐trinitrobenzene). Specifically, the addition of these substrates to mixtures of TTF‐C[4]P and TNDCF produced a fluorescence “turn‐on” response.