CZE separations of basic proteins at low pH in fused silica capillaries with surfaces modified by silane derivatization and/or adsorption of polar polymers

Mixtures of several basic proteins have been used to test CZE capillaries with surfaces modified by new pretreatment procedures; the performance obtained has been compared with that achieved using capillaries treated by procedures described in the literature. It has been shown that addition of non-ionic polyvinylalcohols (PVA) to CZE buffer solutions deactivates even bare, i.e. untreated, fused silica surfaces and renders them suitable for separations of basic proteins. The performance obtained from such surfaces was comparable with that of capillaries modified by the more elaborate procedures of etching, silanol derivatization, and/or adsorptive coating (again with polymers). A home-made device is described which enables derivatization and coating reactions to be performed on fused silica capillaries under an inert atmosphere, i.e. one free from oxygen and water.     

The dipole moment, polarizabilities, and first hyperpolarizabilities of HArF. A computational and comparative study

The electronic and vibrational contributions to the dipole moment, polarizabilities, and first hyperpolarizabilities of HArF are reported. These have been computed by using a series of systematically built basis sets and a hierarchy of computational methods. HArF has a very large first hyperpolarizability along the z axis. This has been rationalized by invoking the difference in the electronic structure between the ground and the first excited state. The argon fluorohydride has been recently derived and characterized. The present study provides complementary data for the understanding of the electronic structure of this interesting argon derivative.     

Röntgenstrahlenbeugung bei hohen Temperaturen zur Untersuchung der thermischen Ausdehnung von MnSe und MnSe2

Zusammenfassung Durch Röntgenstrahlenbeugung mit Hilfe einer 190 mm Unicam-Hochtemperaturkamera wurde die thermische Ausdehnung von MnSe und MnSe₂ von Zimmertemperatur bis 710° bzw. 522° C untersucht. Der thermische Ausdehnungskoeffizient wurde aus den Meßdaten nach der Methode der kleinsten Fehlerquadrate erhalten und beträgt für MnSe: =24,5·10^–6°C^–1 (94–450° C) und =14,3·10^–6°C^–1 (450–710° C). Die Ausdehnung von MnSe₂ verläuft bis zum Bereich, in dem Zersetzung eintritt, linear. Die Methode der kleinsten Fehlerquadrate ergibt den Wert =20,0·10^–6°C^–1 (73–522° C).

---

High temperature X-ray studies of the thermal expansion ofMnSe andMnSe ₂

The thermal expansion of MnSe and MnSe₂ has been studied above room temperature up to 710° and 522° C, resp., by X-ray diffraction techniques using a 190 mm Unicam high temperature camera. The thermal expansion coefficients, , obtained from a linear least-squares analysis of the data are for MnSe: =24.5·10^–6°C^–1 (94–450° C) and =14.3·10^–6°C^–1 (450–710° C). The expansion of MnSe₂ is linear up to the temperature range of decomposition. A least-squares analysis yields a value for of 20.0·10^–6°C^–1 (73–522° C).

---

---

Mit 2 Abbildungen

---

Herrn Prof.H. Nowotny gewidmet.     

Purification and analysis of partially alkylated cyclodextrins by liquid and gas chromatography

Complex mixtures of partially alkylated cyclodextrins can be analyzed by both HPLC and high temperature capillary GC. Because of the limited efficiency of LC, suitable analytical and preparative separations can be achieved only with systems of carefully optimized selectivity. Using LC it has been possible to isolate and purify single cyclodextrin species from very complex mixtures of components which contain unreacted hydroxyl groups in addition to the alkoxy groups. Analysis of the reaction mixtures and of fractions taken from LC separations can be performed with advantage by high resolution capillary GC at high temperatures between 300 and 400 °C. The thermal stability of partially alkylated cyclodextrins in high temperature GC is considerably increased by trimethylsilylation of the free hydroxyl groups. Fast atom bombardment mass spectrometry and proton NMR were used to identify species isolated from the preparative LC separations.     

The temperature-composition phase diagram of the HgTe?HgI2 pseudobinary system on the HgTe rich side

The temperature-composition phase diagram of the HgTe? HgI₂ system was determined from 0 to 45 Mol-% HgI₂ between 25 and 670°C using Debye-Scherrer powder X-ray diffraction techniques and differential thermal analysis. Solid solutions of HgTe and HgI₂ with the cubic, zinc blende-type structure exist above 300°C, having a maximum solubility of 11.7 ± 0.8 Mol-% HgI₂ in HgTe at 501 ± 5°C. The known monoclinic compound Hg₃Te₂I₂ is formed by a peritectic reaction upon cooling at 501 ± 5°C, with the peritectic point at approximately 37 ± 4 Mol-% HgI₂.     

Preparation,purification, and analysis of alkylated cyclodextrins

Methods of alkylation of α-, β- and γ-cyclodextrins have been optimized with regard to the parameters of reaction, degree of alkylation and yields. The analysis of the reaction mixtures and of the isolated single species has been performed by high temperature GC and HPLC. The phase systems of the preferably applied HPLC have been carefully adjusted by variation of both the stationary and mobile phases to the very different hydrophobicities of the various alkylated CD species which have been synthesized. Several partially or fully alkylated CD species were isolated from preparative scale HPLC separations in high purity.     

Equilibrium sublimation and thermodynamic properties of SnS

Knudsen effusion studies of the sublimation of polycrystalline SnS, prepared by annealing and chemical vapor transport, have been performed employing vacuum micro-balance techniques in the temperature range 733–944 K and at pressures ranging from about 6 × 10^?3 to 11 Pa.The third-law heats of sublimation and second-law entropy of reaction SnS(s) = SnS(g) were determined to be ΔH⁰₂₉₈ = 220.4 ± 3.0 kJ mole^? and ΔS⁰₂₉₈ = 162.4 ± 4.5 J K^?1 mole^?1. From these data the standard heat of formation and absolute entropy of SnS(s) were calculated to be ?102.9 ± 4.0 kJ mole^?1 and 79.9 ± 6.0 J K^?1, respectively.     

Performance of density functional theory in computing nonresonant vibrational (hyper)polarizabilities

A set of exchange‐correlation functionals, including BLYP, PBE0, B3LYP, BHandHLYP, CAM‐B3LYP, LC‐BLYP, and HSE, has been used to determine static and dynamic nonresonant (nuclear relaxation) vibrational (hyper)polarizabilities for a series of all‐trans polymethineimine (PMI) oligomers containing up to eight monomer units. These functionals are assessed against reference values obtained using the Møller–Plesset second‐order perturbation theory (MP2) and CCSD methods. For the smallest oligomer, CCSD(T) calculations confirm the choice of MP2 and CCSD as appropriate for assessing the density functionals. By and large, CAM‐B3LYP is the most successful, because it is best for the nuclear relaxation contribution to the static linear polarizability, intensity‐dependent refractive index second hyperpolarizability, static second hyperpolarizability, and is close to the best for the electro‐optical Pockels effect first hyperpolarizability. However, none of the functionals perform satisfactorily for all the vibrational (hyper)polarizabilities studied. In fact, in the case of electric field‐induced second harmonic generation all of them, as well as the Hartree–Fock approximation, yield the wrong sign. We have also found that the Pople 6–31+G(d) basis set is unreliable for computing nuclear relaxation (hyper)polarizabilities of PMI oligomers due to the spurious prediction of a nonplanar equilibrium geometry. © 2013 Wiley Periodicals, Inc.     

Theoretical Modelling of Photoswitching of Hyperpolarisabilities in Ruthenium Complexes

Static excited‐state polarisabilities and hyperpolarisabilities of three Ru^II ammine complexes are computed at the density functional theory (DFT) and several correlated ab initio levels. Most accurate modelling of the low energy electronic absorption spectrum is obtained with the hybrid functionals B3LYP, B3P86 or M06 for the complex [Ru^II(NH₃)₅(MeQ⁺)]³⁺ (MeQ⁺=N‐methyl‐4,4′‐bipyridinium, 3 ) in acetonitrile. The match with experimental data is less good for [Ru^II(NH₃)₅L]³⁺ (L=N‐methylpyrazinium, 2 ; N‐methyl‐4‐{E,E‐4‐(4‐pyridyl)buta‐1,3‐dienyl}pyridinium, 4 ). These calculations confirm that the first dipole‐ allowed excited state (FDAES) has metal‐to‐ligand charge‐transfer (MLCT) character. Both the solution and gas‐phase results obtained for 3 by using B3LYP, B3P86 or M06 are very similar to those from restricted active‐space SCF second‐order perturbation theory (RASPT2) with a very large basis set and large active space. However, the time‐dependent DFT λ_max predictions from the long‐range corrected functionals CAM‐B3LYP, LC‐ωPBE and wB97XB and also the fully ab initio resolution of identity approximate coupled‐cluster method (gas‐phase only) are less accurate for all three complexes. The ground state (GS) two‐state approximation first hyperpolarisability β_2SA for 3 from RASPT2 is very close to that derived experimentally via hyper‐Rayleigh scattering, whereas the corresponding DFT‐based values are considerably larger. The β responses calculated by using B3LYP, B3P86 or M06 increase markedly as the π‐conjugation extends on moving along the series 2 → 4 , for both the GS and FDAES species. All three functionals predict substantial FDAES β enhancements for each complex, increasing with the π‐conjugation, up to about sevenfold for 4 . Also, the computed second hyperpolarisabilities γ generally increase in the FDAES, but the results vary between the different functionals.