Products active on arthropod-IV Insect juvenile hormone mimics—4: hydrindane analogues of cecropia juvenile hormone

Synthesis of cis-hydrindane analogues (2,3) of Cecropia juvenile hormone-I from common intermediate cis-hydrindane-2, 5-dione is presented. The analogues are only moderately active against Dysdercus cingulatus.     

化学键合吸附剂的合成及吸附行为

在无定型硅胶上化学键合十八烷基三氯硅烷，键合率17%-20％，粒度5μm-10μm，以此键合的吸附剂可有效地吸附香烟烟气中的焦油、亚硝胺，吸附率分别为15%-18％和37%-43％，研究了化学键合吸附剂的粒度和加入量对吸附性能的影响。     

Fly‐Ash‐Supported Synthesis of 2‐Mercaptobenzothiazole Derivatives under Microwave Irradiation

Microwave‐assisted, solvent‐free alkylation and acylation of 2‐mercaptobenzothiazole has been attempted using silica gel, alumina, and a new solid support, fly ash. Fly ash, a waste generated at thermal power stations, could be used as solid support just as efficiently as commercial supports. The additional features of methodology include a much faster reaction, easy workup, higher yields, higher purity of the products, and an ecofriendly approach.     

Aminomethyl Transfer (Mannich) Reactions Between an O-Triethylsilylated Hemiaminal and Anilines,RnC6H5−nNH2 Leading to New Diamines,Triamines, Imines,or 1,3,5-Triazines Dependent upon Substituent R

The reactions of the Mannich reagent Et₃SiOCH₂NMe₂ ( 1 ) with a variety of anilines (mono-substituted RC₆H₄NH₂, R=H, 4-CN, 4-NO₂, 4-Ph, 4-Me, 4-MeO, 4-Me₂N; di-substituted R₂C₆H₃NH₂, R₂=3,5-(CH₃)₂, 3,5-(CF₃)₂; tri-substituted R₃C₆H₂NH₂, R₃=3,5-Me₂-4-Br and a “super bulky” aniline (Ar*NH₂) [Ar*=2,6-bis(diphenylmethyl)-4-tert-butylphenyl]) led to the formation of a range of products dependent upon the substituent. With electron-withdrawing substituents, previously unknown diamines, RC₆H₄NH(CH₂NMe₂) [R=CN ( 2 a ), NO₂ ( 2 b )] and R₂C₆H₃NH(CH₂NMe₂) [R₂=3,5-(CF₃)₂ ( 2 c) ] were formed. Further reaction of 2 a , b , c with 1 yielded the corresponding triamines RC₆H₄N(CH₂NMe₂)₂ (R=CN ( 3 a ), NO₂ ( 3 b ) and R₂C₆H₃N(CH₂NMe₂)₂, R₂=3,5-(CF₃)₂ ( 3 c ). The new polyamines were characterized by NMR spectroscopy, and for 2 a , 2 c _, and 3 c , by single crystal XRD. In the case of electron-donating groups, R=4-OMe, 4-NMe₂, 4-Me, 3,5-Me₂, 3,5-Me₂-4-Br, and for R=4-Ph, the reactions with 1 immediately led to the formation of the related 1,3,5-triazines, R=4-MeO ( 5 a ), 4-Me₂N ( 5 b ), 4-Me ( 5 c ), 3,5-Me₂ ( 5 d ), 3,5-Me₂-4-Br ( 5 e ), 4-Ph ( 5 f ), 4-Cl ( 5 g ). The “super bulky” aniline rapidly produced a single product, namely the corresponding imine Ar*N=CH₂ ( 4 ) which was also characterized by single crystal XRD. Imine 4 is both thermally and oxidatively stable. All reactions are very fast, thus based upon the presence of Si we are tempted to denote the reactions of 1 as examples of “Silick” chemistry.     

Estimating Individual Treatment Effect in Observational Data Using Random Forest Methods

Estimation of individual treatment effect in observational data is complicated due to the challenges of confounding and selection bias. A useful inferential framework to address this is the counterfactual (potential outcomes) model, which takes the hypothetical stance of asking what if an individual had received both treatments. Making use of random forests (RF) within the counterfactual framework we estimate individual treatment effects by directly modeling the response. We find that accurate estimation of individual treatment effects is possible even in complex heterogenous settings but that the type of RF approach plays an important role in accuracy. Methods designed to be adaptive to confounding, when used in parallel with out-of-sample estimation, do best. One method found to be especially promising is counterfactual synthetic forests. We illustrate this new methodology by applying it to a large comparative effectiveness trial, Project Aware, to explore the role drug use plays in sexual risk. The analysis reveals important connections between risky behavior, drug usage, and sexual risk. Supplementary material for this article is available online.     

Ionic liquid-modified magnetic polymeric microspheres as dispersive solid phase extraction adsorbent: a separation strategy applied to the screening of sulfamonomethoxine and sulfachloropyrazine from urine

Ionic liquid-modified magnetic polymeric microspheres (ILMPM) were prepared based on Fe₃O₄ magnetic nanoparticles (MNPs) and ionic liquids (ILs) incorporated into a polymer. The composites were characterized using scanning electron microscopy, Fourier transform infrared analysis, thermogravimetric analysis, X-ray diffraction, and vibrating magnetometer, which indicated that ILMPM had a regularly spherical shape and strong magnetic property. The obtained ILMPM were successfully applied as a special adsorbent of magnetic dispersive solid phase extraction (MDSPE) for the rapid extraction and isolation of sulfamonomethoxine sodium and sulfachloropyrazine sodium in urine. The factors that affected extraction efficiency, such as adsorption conditions, desorption conditions, washing and elution solvents, and pH of the sample solution, were optimized. Under the optimum condition, good linearity in the range of 0.005–2.0 μg g^?1 (r?≥?0.9996) was obtained for the two sulfonamides (SAs); the average recoveries at three spiked levels ranged from 86.9 to 102.1 %, with relative standard deviations of ≤4.3 %. The presented ILMPM-MDSPE method combined the advantages of ILs, MNPs, and MDSPE and therefore could be potentially applied for rapid screening of SAs in urine.     

Plant Extract: A Promising Biomatrix for Ecofriendly,Controlled Synthesis of Silver Nanoparticles

Uses of plants extracts are found to be more advantageous over chemical, physical and microbial (bacterial, fungal, algal) methods for silver nanoparticles (AgNPs) synthesis. In phytonanosynthesis, biochemical diversity of plant extract, non-pathogenicity, low cost and flexibility in reaction parameters are accounted for high rate of AgNPs production with different shape, size and applications. At the same time, care has to be taken to select suitable phytofactory for AgNPs synthesis based on certain parameters such as easy availability, large-scale nanosynthesis potential and non-toxic nature of plant extract. This review focuses on synthesis of AgNPs with particular emphasis on biological synthesis using plant extracts. Some points have been given on selection of plant extract for AgNPs synthesis and case studies on AgNPs synthesis using different plant extracts. Reaction parameters contributing to higher yield of nanoparticles are presented here. Synthesis mechanisms and overview of present and future applications of plant-extract-synthesized AgNPs are also discussed here. Limitations associated with use of AgNPs are summarised in the present review.     

Novel Schiff bases–based thiophenes: Design,synthesis and biological evaluation

2-amino-5-(3-fluoro-4-methoxyphenyl)thiophene-3-carbonitrile derivatives have been synthesized from 1-(3-fluoro-4-methoxyphenyl)ethanone, malononitrile, mild base, and sulfur powder using the Gewald method through a multistep reaction sequence. The structures of newly synthesized compounds were established on the basis of their elemental analyses, IR, ¹H NMR, ¹³C NMR, and mass spectral data, and then synthesized compounds were screened for their in vitro antimicrobial activity. Among them, derivatives 3b (thiphene), 3f (pyrazole), and 3d (halogen) showed good activity and remaining derivatives exhibited moderate activity.     

X-ray spectroscopic study of chemical bonding in NiSe and NiSe2

The K absorption spectra of nickel and selenium have been recorded photographically in the pure metals and the compounds NiSe and NiSe₂. It has been observed that the Ni discontinuity shifts toward the high energy side with respect to that in the pure metal by about 5.0 eV for NiSe and about 6.7 eV for NiSe₂. The Se edge in both these compounds is found to shift by about 2.6 eV toward the low energy side with respect to that in pure selenium. From these results it is possible to obtain the bonding pictures for the compounds. The compound NiSe appears to have resonating p³ type of bonding. For NiSe₂ the orbitals involved in the bonding are d²sp³ for the metal atom and sp³ for the metalloid atom. The electrical behaviour of the compounds has been explained on the basis of these bonding pictures.