Electrochemical Detection of MS2 Phage Using a Bead‐based Immunoassay and a NanoIDA

A microbead based sandwich immunoassay for MS2 bacteriophage was developed using an interdigitated array (IDA) electrode with nanoscale dimensions (220 nm electrode width, 620 nm gap). The IDA was fabricated using an electron beam lithographic lift‐off technique. After an antibody‐assisted capture of MS2 using paramagnetic microbeads, a β‐galactosidase labeled secondary antibody was used to convert p‐aminophenyl‐β‐D ‐galactopyranoside (PAPG) into the redox active p‐aminophenol (PAP). Amperometric detection of PAP with IDA electrodes at +300 and ?200 mV vs. a Ag/AgCl reference electrode was used to measure the result, detecting MS2 concentrations as low as 10 ng/mL.     

p-aminophenyl phosphate: an improved substrate for electrochemical enzyme immnoassay

An alternative substrate is described for enzyme immunosaasay with electrochemical detection. Alkaline phosphatase (EC.3.1.3.1) activity is determined by using p-aminophenyl phosphate as the enzyme substrate. Enzyme-generated p-aminophenol is detected amperometrically at a glassy carbon electrody by liquid chromatography with electrochemical detection. The oxidation potential obtained for the detectionof p-aminophenol is lower than that for phenol, the previously used substrate product. The detection limit for p-aminophenol is 0.20pmol. A detection limit of 30 pg ml^-1 for digoxin and a 5-min incubationtime for the enzyme reaction were obtained with the new system.     

Cyclic Voltammetry in a Perfluorocarbon Emulsion Blood Substitute

Cyclic voltammetry in a perfluorocarbon emulsion based blood substitute (PEBS) was evaluated. The intent was to determine how PEBS affects the voltammetry of four representative electroactive compounds: potassium ferricyanide, ruthenium(II) trisbipyridine (rutris), hydroquinone, and 2,6‐dichloroindophenol (DCIP). Voltammograms in 0–20% PEBS‐Tris buffer mixtures are affected by PEBS, but reasonably well‐defined voltammograms are obtained in as much as 20% v/v. This report also shows that PEBS has only a small effect on amperometric detection of the reaction between DCIP and nicotinamide adenine dinucleotide (NADH), which has importance in clinical homogeneous immunoassays. Results support continued exploration of voltammetry/amperometry for quantitative analysis in this medium.     

Stripping voltammetry of copper and lead using gold electrodes modified with self-assembled monolayers

One problem associated with using bare solid metal electrodes, such as gold and platinum, in stripping analysis to determine heavy metal ions such as lead and copper ions in dilute solutions is that underpotential deposition (UPD) gives multiple stripping peaks in the analysis of mixtures. These peaks are often overlapped and cannot be conveniently used for analytical purposes. Bifunctional alkylthiols, such as 3-mercaptopropionic acid, with an ionizable group on the other terminal end of the thiol can form self-assembled monolayers (SAMs) on the surface of the gold electrode. It is shown that such an SAM-modified gold electrode minimizes the UPD effects for the stripping analysis of lead and copper. The anodic peak potential shifts and the peak shape changes, indicating that the SAM changes the deposition and stripping steps of these heavy metal ions. Thus, the sensitivity levels for both single species and mixtures can be significantly improved for the conventional solid electrodes. The mechanism of the deposition reaction at the SAM-modified gold electrodes is discussed. Received: 29 May 1997 / Accepted: 24 June 1997     

Immobilization of lactate oxidase in a poly(vinyl alcohol) matrix on platinized graphite electrodes by chemical cross-linking with isocyanate

A new method for development of an electrochemical sensor based on lactate oxidase is dedbed. Platinized spectroscopic-grade graphite electrodes were modified by chemically cross-linking l-lactate oxidase from Pediococcus species into a poly(vinyl alcohol) network through reaction with a tri-isocyanate. The immobilized enzyme exhibits high activity and long-term stability. The sensor provides a linear response to l-lactate over a concentration range of 2 x 10(-5)-4 x 10(-3)M and a sensitivity of 1.71 muA.1. mmole(-1). The response time of the sensor is 10-45 sec and the detection limit is 10muM. Stable response to the substrate was obtained over a period of 3 months. The new sensor was also used for the analysis of some dairy products without any special pretreatment.     

Spectroelectrochemical Sensing Based on Multimode Selectivity Simultaneously Achievable in a Single Device. 19. Preparation and Characterization of Films of Quaternized Poly(4‐vinylpyridine)‐silica

Quaternized poly(4‐vinylpyridine) (QPVP) has been incorporated as an anion exchanger into sol‐gel derived silica films for use in a spectroelectrochemical sensor. The preparation, characteristics and performance of these films are described. The films, which are spin‐coated onto the surface of a planar optically transparent electrode, are optically transparent and uniform. Scanning electron microscopy and spectroscopic ellipsometry have been used to examine film structure, thickness and optical properties. These films have been shown both spectroscopically and electrochemically to preconcentrate ferrocyanide, a model analyte for the sensor. The films can be regenerated for multiple measurements by exposure to 1 M KNO₃. The effects of polymer molecular weight and storage conditions on film performance are described. The overall response of this film is comparable to the poly(dimethyldiallylammonium chloride)‐silica films previously used for this sensor.     

Conductivity as a Sensor for Monitoring Relative Magnesium Corrosion Rates in Real‐time,in Serum‐containing Media under Cell Culture Conditions

Because controlling the corrosion rate of magnesium metal will be crucial to the success of biomedical implants containing pure magnesium or magnesium alloys, many ways have been sought to improve in vitro tests to analyze corrosion rates, and also to identify new methods of preparing or post‐processing magnesium. In this work, for an in vitro assay, we explored the use of a commercially available conductivity sensor to study magnesium corrosion under cell culture conditions that duplicate many physiologically appropriate parameters. With this sensor, we studied the corrosion of two previously untested magnesium single crystal samples that differed in surface treatments that could alter corrosion rates. The results show that the relative conductivity changes in (mS/cm) over the total time of immersion were proportional to the corrosion rates in (mm/y) and also to the total magnesium released, as detected by inductively coupled plasma mass spectrometry (ICP‐MS).     

Synthesis and novel reactivity of halomethyldimethylsulfonium salts

Iodomethyl-, chloromethyl-, and fluoromethyldimethylsulfonium salts, 4b-d, have been synthesized and are observed to be highly reactive molecules that exhibit extraordinary diversity with respect to the nature of their reactivity, undergoing facile direct substitution (S(N)2) reactions, but also being highly susceptible to electron-transfer reactions. Cyclic voltametry experiments indicated that the iodomethyldimethylsulfonium compound, 4b, is a potent electron acceptor, even surpassing the reactivity of perfluoro-n-alkyl iodides in that capacity. The iodo- and chloromethyldimethylsulfonium salts, 4b,c, as well as the analogous iodomethyltrimethylammonium salt, 3a, are shown to be reactive SET acceptors.