Synthesis and thermal crosslinking of oxazolidine‐functionalized polyurethanes

A new oxazolidine derivative was obtained from phenol, 2‐amino‐2‐methylpropane‐1,3‐diol and paraformaldehyde. The reaction of this novel oxazolidine diol with phenylisocyanate lead to a urethane model compound which can be polymerized thermally by oxazolidine ring opening to give a Mannich bridge structure. Linear segmented polyurethanes were prepared by reaction of different ratios of oxazolidine diol and commercial polyethylenglycol (M_w ～ 400) with 4,4′‐methylenbis (cyclohexylisocyanate) (HMDI, 90% isomers mixture). The polyurethanes were thermally characterized and crosslinked by oxazolidine ring opening to obtain materials which showed improved thermal stability. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4965–4973, 2007     

Cationic fullerenes are effective and selective antimicrobial photosensitizers

Fullerenes are soccer ball-shaped molecules composed of carbon atoms, and, when derivatized with functional groups, they become soluble and can act as photosensitizers. Antimicrobial photodynamic therapy combines a nontoxic photosensitizer with harmless visible light to generate reactive oxygen species that kill microbial cells. We have compared the antimicrobial activity of six functionalized C(60) compounds with one, two, or three hydrophilic or cationic groups in combination with white light against gram-positive bacteria, gram-negative bacteria, and fungi. After a 10 min incubation, the bis- and tris-cationic fullerenes were highly active in killing all tested microbes (4-6 logs) under conditions in which mammalian cells were comparatively unharmed. These compounds performed significantly better than a widely used antimicrobial photosensitizer, toluidine blue O. The high selectivity and efficacy exhibited by these photosensitizers encourage further testing for antimicrobial applications.     

Effects of soluble surfactants on the deformation and breakup of stretching liquid bridges

Surfactants are routinely used to control the breakup of drops and jets in many applications such as inkjet printing, crop spraying, and DNA or protein microarraying. The breakup of surfactant-free drops and jets has been extensively studied. By contrast, little is known about the closely related problem of interface rupture when surfactants are present. Solutions of a nonionic surfactant, pentaethylene glycol monododecyl ether, or C12E5, in water and in 90 wt % glycerol/water are used to show the effects of surfactant and viscosity on the deformation and breakup dynamics of stretching liquid bridges. Equilibrium surface tensions for both solutions can be fitted with the Langmuir-Szyskowski equation. All experiments have been done at 24 degrees C. The critical micelle concentrations for C12E5 are 0.04 and 0.4 mM in water and the glycerol/water solution, respectively. With high-speed imaging, the dynamic shapes of bridges held captive between two rods of 3.15 mm diameter are captured and analyzed with a time resolution of 0.1-1 ms. The bridge lengths are 3.15 mm initially and about 5-7 mm at pinch-off. Breakup occurs after stretching for about 0.2-0.3 s, depending on the solution viscosity and the surfactant concentration. When the liquid bridges break up, the volume of the sessile drop left on the bottom rod is about 3 times larger than that of the pendant drop left on the top rod. This asymmetry is due to gravity and is influenced by the equilibrium surface tensions. Surfactant-containing low-viscosity water bridges are shown to break up faster than surfactant-free ones because of the effect of gravity. With or without surfactant, water bridges form satellite drops. Surfactant-containing high-viscosity glycerol/water bridges break up more slowly than surfactant-free ones because of strong viscous effects. Moreover, the shapes of the sessile drops close to breakup exhibit a "pear-like" tip; whether a satellite forms depends on the surface age of the bridge before stretching commences. These unexpected effects arising from the addition of surfactants are due to the capillary pressure reduction and Marangoni flows linked to dynamic surface tension.     

Synthesis and cation binding properties of fluorescent calix[4]arene derivatives bearing tryptophan units at the lower rim

The fluorescent peptidocalixarenes, 5,11,17,23-tetra-tert-butyl-25,26,27,28-tetrakis(O-methyl-l-tryptophanylcarbonylmethoxy)calix[4]arene (1) and 5,11,17,23-tetra-tert-butyl-25,27-di(O-methyl)-26,28-bis(O-methyl-l-tryptophanylcarbonylmethoxy)calix[4]arene (2), were prepared by introducing tryptophan subunits at a lower calixarene rim. Coordination abilities of 1 and 2 towards Eu(III) and alkali metal cations were studied by spectrophotometric, spectrofluorimetric, conductometric and potentiometric titrations in acetonitrile at 25°C. Rather strong complexation was observed for smaller alkali metal cations Li⁺ and Na⁺ (log K _Li1 >6, log K _Li2 >6, log K _Na1  = 8.25, log K _Na2  = 6.94), and moderate for K⁺ (log K _K1  = 5.09, log K _K2  = 4.09). Larger Rb⁺ and Cs⁺ cations did not fit in the ion binding site of 1 so no complexation was detected, whereas the more flexible ligand 2 accommodated Rb⁺ cation (log K _Rb2  = 3.44). The fluorescence of 1 (λ_ex = 280 nm, λ_em = 340 nm) was remarkably quenched by Eu(III). Stability constant of 1:1 (Eu³⁺:1) complex determined spectrofluorimetrically amounted to log K _Eu1  = 6.16.     

Monomers and polymers from plant oils via click chemistry reactions

As a consequence of the depleting of fossil reserves and environmental issues, today, plant oils and fatty acids derived therefrom have a respectable status within the polymer chemistry community. However, maximizing the benefits of these renewable feedstocks requires the utilization of sustainable and efficient chemical transformations. The emergence of click chemistry concept and especially the renaissance of thiol‐ene addition reaction have had an impact on the way to make plant oil‐derived polymers. This highlight discusses the applicability and success of thiol‐ene addition and other click reactions in the transformation of oleochemicals into monomers and polymers. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013     

Polybenzoxazines from renewable diphenolic acid

The novel benzoxazine monomers, DPA‐Bz and MDP‐Bz from renewable diphenolic acid (DPA), which mimics the structure of bisphenol A (BPA), were synthesized by traditional approaches. The structure and purity of the monomers was confirmed by FTIR, ¹H NMR, and ¹³C NMR spectra. The thermally activated polymerization of the MDP‐Bz and DPA‐Bz afforded thermosetting polybenzoxazines with higher T_g's, 270 °C and 208 °C respectively, and higher crosslinking density compared to BPA‐Bz, due to the transesterification or esterification reactions occurred during curing process. These reactions are in accordance with the number of independent reactions determined analyzing by SVD the chemical rank of the IR spectra data matrices recorded along the homopolymerization reactions monitored at 200 °C. Spectral and concentration profiles of the active chemical species involved in these processes were obtained by MCR‐ALS. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Fatty acid derived phosphorus‐containing polyesters via acyclic diene metathesis polymerization

The acyclic diene metathesis (ADMET) polymerization of a phosphorus‐containing α,ω‐diene prepared from a plant oil derived building block is reported. Different ruthenium based metathesis catalysts and conditions were tested to optimize the ADMET polymerization of this monomer. Undecylenyl undecenoate was used as fully renewable comonomer to obtain polyesters with different phosphorus contents and to increase the renewable content of the final polymers. Copolymerization caused marked variations in the molecular weights leading to polyesters from 6 to 38 KDa. The effect of the ADMET polymerization temperature in the thermal properties of the copolymers was studied and their thermal degradation and flame retardant properties were evaluated. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5760–5771, 2009     

Isolation,purification, and characterization of thermophilic laccase from the xerophyte <Emphasis Type="Italic">Cereus pterogonus</Emphasis>

Three laccase temperature isoforms were isolated and purified to homogeneity from the xerophyte plant species Cereus pterogonus. This catalytically active protein exhibited an apparent molecular mass of 137 kDa, 90 kDa, and 43 kDa. Under reducing conditions the enzyme yielded a subunit molecular mass of 43 kDa alone, suggesting that the enzyme is a multimer of its subunits. The enzyme exhibited an optimum pH of 10 with 2,6-dimethoxyphenol used as a substrate. The 137 and 90 kDa forms yielded optimum activity at 90°C; whereas the 43 kDa molecular form yielded optimum activity at 60°C. The enzyme kinetic constant Km remained closely similar for all three enzyme forms, whereas Vmax varied by 25 % overall. The catalytic activity remained above its t_1/2 value in excess of the 30 min denaturation assay period at 60°C and 90°C. These high-temperature isoforms of the plant laccase enzyme with alkaline pH optima can find great industrial use.     

Biobased polyurethanes from polyether polyols obtained by ionic‐coordinative polymerization of epoxidized methyl oleate

A series of poly(ether urethane) networks were synthesized from polyether polyols obtained by ionic‐coordinative polymerization of epoxidized methyl oleate (EMO) using 4,4′‐methylenebis(phenyl isocyanate) or l ‐lysine diisocyanate as coupling agents. Moreover, a variety of segmented poly(ether urethane) networks with different hard segment contents were obtained using 1,3‐propanediol as the chain extender. The materials were characterized by differential scanning calorimetry, thermogravimetric analysis, dynamic mechanical thermal analysis, and tensile properties. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010