Poly-hydroxamic acid (PHA) matrix for gadolinium pre-concentration and removal

A novel hydrophilic, three dimensionally cross-linked, aliphatic backbones with pendant hydroxamic acid (HA) group as functional moiety has been synthesized and utilized targeting removal of gadolinium [Gd(III)] from laboratory waste aqueous effluent. To understand the nature of sorption, gadolinium solution of various concentrations viz., 20, 10, 5.0, 1.0, 0.5 and 0.1 ppm has been contacted with a dose rate of 1 g/100 mL for 2 h. In this study, ICP-AES has been used for determination of concentration (ppm) of gadolinium in feed, filtrate and elute. EDXRF study also ensures the presence of gadolinium in the respective medium. Loaded gadolinium matrix was eluted with 1 N HCl for determining the elution factor (0.98).     

Transport of U(VI) from sulphuric acid medium across supported liquid membrane (SLM) containing di-(2-ethylhexyl) phosphoric acid (D2EHPA)/n-dodecane as a carrier

This paper reports on the supported liquid membrane (SLM) based transport studies of U(VI) from sulphate medium using di-(2-ethylhexyl) phosphoric acid/n-dodecane as carrier. Polytetrafluoroethylene membrane was used as solid support and H₂SO₄ as receiver phase. The effects of various parameters such as receiver phase concentration, feed acidity, carrier concentration, U(VI) concentration, membrane thickness and membrane pore size on U(VI) transport had been investigated. With increase in H₂SO₄ concentrations and pH of feed solution there is an increase in U(VI) transport across the SLM. Similarly with increase in membrane thickness the U(VI) transport decrease whereas in case of pore size variation reverse results are obtained. The membrane thickness variation results showed that the U(VI) transport across the SLM is entirely diffusion controlled and the diffusion coefficient the D _(o) was calculated as 1.36 × 10^?7 cm² s^?1. Based on optimized condition, a scheme had been tested for selective recovery of U(VI) from ore leach solution containing a large number of other metal ions.     

Theoretical modeling of Cu(II), Sr(II), Gd(III), U(VI) sorption from nuclear effluent on PHA resin with experimental validation

Journal of Radioanalytical and Nuclear Chemistry - The sorption capacity of an in–house synthesized novel resin Polyhydraxamic acid(PHA) towards Cu(II), Sr(II), Gd(III), U(VI) ions was...     

Extraction behavior of U(IV) from nitric acid medium using di-isodecyl phosphoric acid dissolved in dodecane

Solvent extraction of U(VI) with di-isodecyl phosphoric acid (DIDPA)/dodecane from nitric acid medium has been investigated for a wide range of experimental conditions. Effect of various parameters including nitric acid concentration, DIDPA concentration, temperature, stripping agents, and other impurities like rear earths, transition metal ion, boron, aluminum ion on U(VI) extraction has been studied. The species extracted in the organic phase is found to be UO₂(NO₃)(HA₂)·H₂A₂ at lower acidity (<3.0 M HNO₃). Increase in temperature lead to the decrease in extraction with the enthalpy change by ∆H = −16.27 kJ/mol. Enhancement in extraction of U(VI) from nitric acid medium was observed with the mixture of DIDPA and tri butyl phosphate (TBP). The stripping of U(VI) from organic phase (DIDPA–U(VI)/dodecane) with various reagents followed the order: 4 M H₂SO₄ > 5% (NH₄)₂CO₃ > 8 M HCl > 8 M HNO₃ > Water. High separation factors between U(VI) and impurities suggested that the use of DIDPA for purification of uranium from multi elements bearing solution.     

Counter-current extraction and separation of U(VI) from a mixture of U(VI)–Th(IV)–Y(III) using tris-2-ethyl hexyl phosphate (TEHP)

Evaluation of tris-2-ethyl hexyl phosphate (TEHP) for counter-current extraction and separation of U(VI) from a mixture of U(VI)–Th(IV)–Y(III) from nitric acid medium was carried out under wide experimental conditions. Batch extraction studies were carried out to investigate the effect of nitric acid concentration in feed solution, U(VI)/Th(IV) ratio and extractant concentration and the results were compared with established solvent such as tri-n-butyl phosphate (TBP) for separation of U(VI) from nitric acid medium. McCabe–Thiele diagrams for extraction as well as stripping of U(VI) were constructed under simulated conditions. Based on batch experiments, six stage counter-current extraction studies were conducted under various TEHP concentration and it was observed that 0.1 M TEHP/n-paraffin was most suitable for selective recovery of U(VI) from a mixture of U(VI)–Th(IV). An optimized condition, 0.1 M TEHP/n-paraffin, 2 M HNO₃ in feed and six number of stages was evaluated for selective extraction and stripping of U(VI) from a solution containing mixture of U(VI)–Th(IV)–Y(III) in nitric acid medium. The U(VI) in strip solution was precipitated using 30 % H₂O₂ at pH ~3. Average particle size of the final precipitate was found to be ~33 μm.     

Extraction of U(VI) and Th(IV) from nitric acid medium using tri(butoxyethyl) phosphate (TBEP) in <Emphasis Type="Italic">n</Emphasis>-paraffin

Extraction behavior of U(VI) and Th(IV) from nitric acid medium is investigated using organo-phosphorous extractant, tri(butoxyethyl) phosphate in n-paraffin at room temperature (27 ± 1 °C). The effect of diluents, nitric acid concentration as well as extractant concentration on extraction of U(VI) and Th(IV) are evaluated. Extraction of U(VI) and Th(IV) from nitric acid medium proceeds via solvation mechanism. Slope analysis technique showed the formation of neutral complexes of the type of UO₂(NO₃)₂·2TBEP and Th(NO₃)₄·3TBEP with U(VI) and Th(IV) respectively in the organic phase. The FTIR data showed shifting of P=O stretching frequency from 1,282 to 1,217 cm⁻¹ indicating the strong complexation of P=O group with UO₂ ²⁺ ions in the organic phase. Effect of stripping agents, other metal ions and their separation with respect to U(VI) extraction has also been investigated.