Highly Proton-Conductive Zinc Metal-Organic Framework Based On Nickel(II) Porphyrinylphosphonate

The design of new solid-state proton-conducting materials is a great challenge for chemistry and materials science. Herein, a new anionic porphyrinylphosphonate-based MOF ( IPCE-1Ni ), which involves dimethylammonium (DMA) cations for charge compensation, is reported. As a result of its unique structure, IPCE-1Ni exhibits one of the highest value of the proton conductivity among reported proton-conducting MOF materials based on porphyrins (1.55×10⁻³ S cm⁻¹ at 75 °C and 80 % relative humidity).     

Metal-Enhanced S(2) Fluorescence from Azulene

In this paper, we report the first observation of metal-enhanced S(2) emission at room and low temperature (77K). The S(2) emission intensity of Azulene is enhanced by close proximity to Silver island films (SiFs). In this regard, a ≈ 2-fold higher S(2) fluorescence intensity of Azulene was observed from SiFs as compared to a glass control sample. This suggests that S(2) excited states can couple to surface plasmons and enhance S(2) fluorescence yields, a helpful observation in our understanding the interactions between plasmons and lumophores, and our continued efforts to develop a unified plasmon-lumophore/fluorophore theory.     

Rapid deposition of triangular silver nanoplates on planar surfaces: application to metal-enhanced fluorescence

A simple and rapid wet-chemical technique for the deposition of silver triangles on conventional glass substrates, which alleviates the need for lithography, has been developed. The technique is based on the seed-mediated cetyltrimethylammonium-bromide-directed growth of silver triangles on glass surfaces, where smaller spherical silver seeds that were attached to the surface were subsequently converted and grown into silver triangles in the presence of a cationic surfactant and silver ions. The size of the silver triangles was controlled by sequential immersion of silver seed-coated glass substrates into a growth solution and by the duration time of immersion. Atomic force microscopy studies revealed that the size of the silver triangles ranged between 100 and 500 nm. Interestingly, these new surfaces are a significant improvement over traditional silver island films for applications in metal-enhanced fluorescence. A routine 16-fold enhancement in emission intensity was typically observed, for protein-immobilized indocyanine green, with a relatively very low loading density of silver triangles on the glass surface.     

Investigation of chemical activity,SCHIFF base reactions and staining effects of some amino acids by spectrophotometric and theorical methods

In this study, the staining properties of selected amino acids with Brassica oleraceae extract in alum and alum-free media were investigated. Basic, acidic and neutral amino acids (arginine, glutamic acid and glycine) were used to investigate the effect of staining. It was determined that all amino acids were stained in alum media. In the second step, the R group of amino acids found in the proteins of the cell nucleus was reacted with salicyl aldehyde. This reaction was successful only with Arginine. The staining properties of the newly formed compound were also investigated in alum and alum-free environments. Evaluation of the results was done using FT-IR and ¹H NMR methods. All compounds were optimized with the Gaussian G09 program (DFT/B3LYP/6.311 ?G(d.p) basic set. HOMO, LUMO and HOMO-LUMO gap values were determined. Chemical reaction capabilities of amino acids were discussed with the help of HOMO-LUMO gap values.     

Low Temperature Metal-Enhanced Fluorescence

In this short letter, we describe the effects of low temperature on the Metal-Enhanced Fluorescence (MEF) phenomenon. Fluorophores close to Silver Island Films (SiFs) show on average two- to ten-fold enhancements in their fluorescence signatures at room temperature. However, at 77 K, we have observed that MEF is even more pronounced as compared to an identical glass control sample. We also demonstrate that the further enhancements in MEF occur at low temperature over a range of visible wavelengths for different fluorophores, for both SiFs and 20 nm surface deposited gold colloids.     

Graphene oxide-octadecylsilane incorporated monolithic nano-columns with 50 μm id and 100 μm id for small molecule and protein separation by nano-liquid chromatography

In this study, graphene oxide-octadecylsilane incorporated monolithic nano-columns were developed for protein analysis by nano liquid chromatography (nano LC). The monolithic column with 100 μm id was first prepared by an in situ polymerization using ethylene dimethacrylate (EDMA), 3-chloro-2-hydroxypropylmethacrylate (HPMA-Cl), and methacryloyl graphene oxide nanoparticles (MGONPs). MGONPs were synthesized by the treatment of 3-(trimethoxysilyl)propylmethacrylate (TMSPM) and GO. Tetrahydrofuran (THF) and dodecanol were used as the porogenic solvent. The resulting column was functionalized by dimethyloctadecylch lorosilane (DODCS) for the enhancement of hydrophobicity. The functionalization greatly improved the baseline separation of hydrophobic compounds such as polyaromatic hydrocarbons (PAHs). The optimized monolith with respect to total polymerization mixture was characterized by using Fourier-transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM) X-ray diffraction (XRD) and chromatographic analyses. The blank monoliths without functionalization exhibited poor separation while a good separation performance of MGONPs functionalized monoliths was achieved. The monolith with 100 μm id was evaluated in protein separation in nano LC using RNase A, Cytochrome C, Lysozyme, Trypsin, and Ca isozyme II as the test proteins. It was shown that protein separation mechanism was based on large π-system of GO and hydrophobicity of the monolithic structure. Theoretical plates number up to 57 600 plates were achieved. The nano-column with 50 μm id was also prepared using the same polymerization mixture under the same chemical conditions. These nano-columns were employed for protein separation by nano LC, and the dependence of both nano-column performance on the internal diameter was also discussed.     

Synthesis and characterization of poly(1-vinyl-1,2,4-triazole) (PVTri)-barium hexaferrite nanocomposite

We present a method for the fabrication of PVTri-BaFe₁₂O₁₉ nanocomposites by in-situ polymerization of PVTri in the presence of synthesized BaFe₁₂O₁₉ nanoparticles. Nanoparticles, polymer and nanocomposite were analyzed by XRD, FTIR, TGA, TEM, NMR, GPC and conductivity techniques for structural and physicochemical characteristics. Crystallographic analysis revealed the phase as hexaferrite and X-ray line profile fitting yielded a crystallite size of 17±5 nm. Conjugation of PVTri to nanoparticle surface was assessed to be via carbonyl groups on the polymer. TG analysis revealed that 45 wt% of nanocomposite is inorganic phase (BaFe₁₂O₁₉). It was found out that the ac conductivity of nanocomposite under a certain frequency increases with temperature.     

Enhanced Ratiometric pH Sensing Using SNAFL-2 on Silver Island Films: Metal-enhanced Fluorescence Sensing

We have explored the opportunities for enhanced ratiometric pH sensing using the well-known carboxy seminaphthofluorescein (SNAFL-2) and silver island films (SiFs). Our results show that the metallic surfaces can provide up to a 40-fold increase in probe fluorescence intensity as compared to nonmetallic surfaces with the same probe coverage. However, while the S/N is significantly better for pH sensing, the emission wavelength ratiometric values are similar to that obtained in solution, due to the fact that the emission of both the acidic and basic forms of the probe are enhanced to similar extents. To the best of our knowledge this is the first report of enhanced ratiometric fluorescence sensing on metallic surfaces.     

Optical characterization of the silicon photodiodes for the establishment of national radiometric standards

Optical properties of the silicon photodiodes are investigated in the visible spectral regime. Non-linearity measurement standard was established by using Hamamatsu S1337-11 type windowless silicon photodiode whose non-linearity value was found to be better than 6×10⁻⁵ at photocurrent level of 10⁻⁹ to 10⁻⁴ A. Temperature effects on the spectral responsivity for S1337-11, S1337-1010BQ and S1227-1010BQ type photodiodes were analyzed between 20°C and 40°C at 488.1, 514.7 and 632.8 nm vacuum wavelengths. The spatial uniformities of the responsivity for three type photodiodes are performed with a laser beam having 1 mm diameter by using home made two-axis micro translation system. Results of the reflectance measurements for three elements of reflection-based trap detectors were compared with the predicted values obtained from Fresnel equations.