Thermal conductivity modeling of nanofluids with ZnO particles by using approaches based on artificial neural network and MARS

Journal of Thermal Analysis and Calorimetry - Nanofluids are attractive alternatives for the current heat transfer fluids due to their remarkably higher thermal conductivity which leads to the...     

The influence of laser annealing in the presence of longitudinal weak magnetic field on asymmetrical magnetoimpedance response of CoFeSiB amorphous ribbons

Asymmetrical magnetoimpedance (AMI) is very important to further improve micromagnetic sensor performance in terms of linearity and sensitivity. This behavior was investigated for Co_68.15Fe_4.35Si_12.5B₁₅ amorphous ribbons irradiated by a 1064 nm Nd:YAG pulsed laser in air and in the presence of 3 Oe longitudinal magnetic field with changing pulse repetition rate. Results indicate that for different pulse repetition rates, various types of AMI profiles appear. For the samples annealed in the presence of longitudinal field, because of induced anisotropy, rising in asymmetry factor takes place and another peak in the magnetoimpedance (MI) profile transpires.     

<Emphasis Type="SmallCaps">l</Emphasis>-Cysteine-functionalized magnetic nanoparticles (LCMNP): as a magnetic reusable organocatalyst for one-pot synthesis of 9-(1<Emphasis Type="Italic">H</Emphasis>-indol-3-yl) xanthen-4-(9<Emphasis Type="Italic">H</Emphasis>)-ones

l-Cysteine-functionalized magnetic nanoparticles (LCMNP) were introduced as an efficient and magnetically separable organocatalyst for the synthesis of 9-(1H-indol-3-yl) xanthen-4-(9H)-one derivatives. This class of compounds was synthesized via a one-pot three-component coupling reaction of 2-hydroxybenzaldehyde, dimedone, and indole in the presence of catalytic amount of LCMNP under mild and green conditions. High yields, short reaction time, easy workup, using environmental friendly conditions, and magnetic reusable catalyst are the advantages of this synthetic methodology. The LCMNP catalyst was reusable in this reaction at least for 6 times without significant decreasing in its catalytic activity.     

Wet 2,4,6-trichloro-1,3,5-triazine(TCT)as an efficient catalyst for the synthesis of 2,4,6-triarylpyridines under solvent-free conditions

<正>An efficient one-pot synthesis of 2,4,6-triarylpyridines has been described.This involves the three-component reaction of aldehydes,ketones and ammonium acetate in the presence of a catalytic amount of wet 2,4,6-trichloro-1,3,5-triazine(TCT) under solvent-free condition at 130℃.     

Mechanistic Investigation on Dynamic Interfacial Tension Between Crude Oil and Ionic Liquid Using Mass Transfer Concept

Ionic liquids (ILs) are a new kind of solvents that have recently gained an upsurge in attention in light of their unique potential for different applications. With respect to this, in the present study, applicability of an IL called 1-octadecyl-3-methylimidazolium chloride ([C18mim] [Cl]) as a new class of surfactant was investigated. Different interfacial tension (IFT) measurements were performed to find the effect of IL concentration and temperature on the IFT of water/crude oil system. The observed trend was explained based on mass transfer mechanisms including diffusion and convective mass transfer. In addition, the effect of rotational speed, ranging between 3000 and 9000 rpm, on the IFT was examined with the hypothesis that it can modify the convective mass transfer. Finally, since it has been reported that the Marangoni effect enhances the mass transfer flux in the surfactant solutions, two different methods of IFT measurements including the spinning drop and pendant drop methods were applied to investigate the effects of convective mass transfer on the equilibrium IFT.     

Functionalization of multiwalled carbon nanotubes for reinforcing of poly(l-lactide-co--caprolactone) biodegradable copolymers

Up to now, synthetic polymers and biomacromolecules have been grafted or assembled onto the convex surface of carbon nanotubes (CNTs) via covalent bonds or chemisorptions. In this research, poly(l-lactide-co--caprolactone)-functionalized multiwalled carbon nanotubes (MWCNT-OH-g-PCLA)s are synthesized by in situ ring-opening copolymerization of l-lactide (LA) and -caprolactone (CL) using stannous octanoate and hydroxylated MWCNTs (MWCNT-OHs) as the initiating system. The pristine MWCNTs are modified to possess carboxyl groups and then hydroxyl groups. MWCNT-OHs are used as coinitiators to polymerize LA and CL by the surface-initiated ring-opening polymerization. The FT-IR spectra, SEM and TEM micrographs revealed that the PCLA grafted form the sidewall of MWCNTs strongly. The TGA analysis indicates that about 75 wt% of functionalized MWCNTs with PCLA belongs to grafted PCLA and the remaining 25 wt% to the initial MWCNT-OH.     

Copper hydroxide nanostructure-modified carbon ionic liquid electrode as an efficient voltammetric sensor for detection of metformin: a theoretical and experimental study

The electrocatalytic oxidation of metformin (MET) was investigated at Cu(OH)₂ nanoparticle-modified carbon ionic liquid electrode (Cu(OH)₂/CILE). This electrode exhibited excellent characteristic for the electrocatalytic oxidation of metformin at the potential of +0.6 V with good sensitivity and selectivity. The presence of Cu(OH)₂ nanostructures in the composite electrode leads to the appearance of oxidation peak of MET. Under optimal experimental conditions, the peak current response increased linearly with metformin concentration over the range of 1 µM–4 mM. The detection limit of the method is 0.5 µM. Moreover, the closer look was taken at the electronic properties of MET and its Cu (II) complexes such as frontier molecular orbital (HOMO and LUMO) and binding interaction energies using density functional theory. Effect of pH was also investigated at B3LYP/6-311++g** level. Theoretical results confirmed the experimental evidences of Cu (II) complexation. Therefore, Ease of preparation, wide linear range, low overpotential, high sensitivity and selectivity provide the possibility of applying this method for the detection of MET in biological samples.