Pore size distributions in low‐k dielectric thin films from X‐ray porosimetry

X‐ray reflectivity has been used to determine the mass uptake of probe molecules in porous thin films supported on thick silicon wafers. The adsorption occurs by capillary condensation when the films are exposed to probe vapor at controlled partial vapor pressures. The probe solvent partial pressure was varied by mixing saturated air and dry air at constant temperature or by changing sample temperature at a constant vapor concentration. Pore size distribution in the films can be calculated from the probe uptake with typical porosimetric approaches such as the application of the Kelvin equation to convert partial pressure into pore size. For illustration, the pore size distribution of three different nanoporous thin films, the primary candidate of ultra‐low‐k interlevel dielectrics in the next generation of integrated circuit chips, was determined with this technique. These samples represent different generations of low‐k dielectrics developed by industry. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2170–2177, 2002     

Quantitative analysis of bilobalide and ginkgolides from Ginkgo biloba leaves and Ginkgo products using (1)H-NMR

1H-NMR spectrometry was applied to the quantitative analysis of the bilobalide, ginkgolides A, B, and C in Ginkgo biloba leaves and six kinds of commercial Ginkgo products without any chromatographic purification. The experiment was performed by the analysis of each singlet H-12, which were well separated in the range of delta 6.0-7.0 in the (1)H-NMR spectrum. However, the H-12 protons of bilobalide and ginkgolides may have overlapped with H-6 or H-8 protons of the Ginkgo flavonoids. Therefore, the optimum (1)H-NMR solvent for the analysis of the compound was selected through the evaluation of solvent effects on the resolution of these signals from the compounds. Acetone-d(6)-benzene-d(6) (50 : 50) was found to be the best one among the solvents evaluated. The quantity of the compounds was calculated by the relative ratio of the intensity of each compound to the known amount of internal standard (25 microgram), phloroglucinol. This method allows rapid and simple quantitation of underivatized bilobalide and ginkgolides in 5 min without any pre-purification steps.     

Syntheses of 1beta-methylcarbapenems bearing 5-methyl-4-hydroxypyrrolidinone

A new series of 1beta-methylcarbapenems 1a-d bearing 5-methyl-4-mercaptopyrrolidinone rings has been prepared and evaluated for in vitro antibacterial activity and pharmacokinetic parameters. Most compounds showed excellent antibacterial activity and high stability to dehydropeptidase-1. We have synthesized optically active 5-methyl-4-hydroxypyrrolidinones from enantiomerically pure aziridine esters.     

Metabolic fingerprinting of Ephedra species using 1H-NMR spectroscopy and principal component analysis

The metabolomic analysis of Ephedra species was performed using 1H-NMR spectroscopy and multivariate data analysis. A broad range of metabolites could be detected by 1H-NMR spectroscopy without any chromatographic separation. The principal component analysis used to reduce the huge data set obtained from the 1H-NMR spectra of the plant extracts clearly discriminated three different Ephedra species. The major differences in Ephedra sinica, Ephedra intermedia and Ephedra distachya var. distachya were found to be due to benzoic acid analogues in the aqueous fraction and ephedrine-type alkaloids in the organic fraction. Based on this metabolomic recognition, one of nine commercial Ephedra materials evaluated was shown to be a mixture of Ephedra species. This method will be a useful tool for chemotaxonomic analysis and authentification of Ephedra species including quality control of plant materials.     

Metal ion separations with proton-ionizable crown ethers and their polymers

Abstract

Lipophilic crown ethers with pendent proton-ionizable groups are novel complexing agents for use in metal ion separations by solvent extraction. For a series of structurally related, lipophilic dibenzocrown ether carboxylic acids, the efficiency and selectivity of competitive alkali metal cation extraction for aqueous solution into chloroform is found to be strongly influenced by the crown ether ring size and the lipophilic group attachment site. Reaction of dibenzocrown ether carboxylic acids with formaldehyde in formic acid produces condensation polymers which possess both ion-exchange and cyclic polyether binding sites for metal ion complexation. These resins exhibit excellent exchange kinetics for competitive alkali metal cation sorption from aqueous solution and subsequent stripping and may be used in concentrator columns for the recovery of these metal ions from very dilute aqueous solution. Cation selectivity in the sorption and stripping steps is controlled by the structure of the crown ether monomer unit.     

Natural deep eutectic solvents as new potential media for green technology

Developing new green solvents is one of the key subjects in Green Chemistry. Ionic liquids (ILs) and deep eutectic solvents, thus, have been paid great attention to replace current harsh organic solvents and have been applied to many chemical processing such as extraction and synthesis. However, current ionic liquids and deep eutectic solvents have still limitations to be applied to a real chemical industry due to toxicity against human and environment and high cost of ILs and solid state of most deep eutectic solvents at room temperature. Recently we discovered that many plant abundant primary metabolites changed their state from solid to liquid when they were mixed in proper ratio. This finding made us hypothesize that natural deep eutectic solvents (NADES) play a role as alternative media to water in living organisms and tested a wide range of natural products, which resulted in discovery of over 100 NADES from nature. In order to prove deep eutectic feature the interaction between the molecules was investigated by nuclear magnetic resonance spectroscopy. All the tested NADES show clear hydrogen bonding between components. As next step physical properties of NADES such as water activity, density, viscosity, polarity and thermal properties were measured as well as the effect of water on the physical properties. In the last stage the novel NADES were applied to the solubilization of wide range of biomolecules such as non-water soluble bioactive natural products, gluten, starch, and DNA. In most cases the solubility of the biomolecules evaluated in this study was greatly higher than water. Based on the results the novel NADES may be expected as potential green solvents at room temperature in diverse fields of chemistry.     

Solubility and Stability of Some Pharmaceuticals in Natural Deep Eutectic Solvents-Based Formulations

Some medicines are poorly soluble in water. For tube feeding and parenteral administration, liquid formulations are required. The discovery of natural deep eutectic solvents (NADES) opened the way to potential applications for liquid drug formulations. NADES consists of a mixture of two or more simple natural products such as sugars, amino acids, organic acids, choline/betaine, and poly-alcohols in certain molar ratios. A series of NADES with a water content of 0–30% (w/w) was screened for the ability to solubilize (in a stable way) some poorly water-soluble pharmaceuticals at a concentration of 5 mg/mL. The results showed that NADES selectively dissolved the tested drugs. Some mixtures of choline-based NADES, acid-neutral or sugars-based NADES could dissolve chloral hydrate (dissociated in water), ranitidine·HCl (polymorphism), and methylphenidate (water insoluble), at a concentration of up to 250 mg/mL, the highest concentration tested. Whereas a mixture of lactic-acid–propyleneglycol could dissolve spironolacton and trimethoprim at a concentration up to 50 and 100 mg/mL, respectively. The results showed that NADES are promising solvents for formulation of poorly water-soluble medicines for the development of parenteral and tube feeding administration of non-water-soluble medicines. The chemical stability and bioavailability of these drug in NADES needs further studies.     

Synthesis of 2D Germanane (GeH): a New,Fast, and Facile Approach

Germanane (GeH), a germanium analogue of graphane, has recently attracted considerable interest because its remarkable combination of properties makes it an extremely suitable candidate to be used as 2D material for field effect devices, photovoltaics, and photocatalysis. Up to now, the synthesis of GeH has been conducted by substituting Ca by H in a β‐CaGe₂ layered Zintl phase through topochemical deintercalation in aqueous HCl. This reaction is generally slow and takes place over 6 to 14 days. The new and facile protocol presented here allows to synthesize GeH at room temperature in a significantly shorter time (a few minutes), which renders this method highly attractive for technological applications. The GeH produced with this method is highly pure and has a band gap (E_g) close to 1.4 eV, a lower value than that reported for germanane synthesized using HCl, which is promising for incorporation of GeH in solar cells.     

Preparation of "high specific activity" radiochemical forms of vanadium,manganese and thallium for metallo-toxicological studies

In this paper are presented the production methods for very "high specific activity" radionuclides (HSA-RN) of vanadium, manganese and thallium which have been developed in our laboratories for labelling different chemical forms of these elements present in the echo-systems in ultra-trace amounts, for metallo-toxicological and bio-kinetic studies. Use was made of both cyclotron and thermal nuclear reactor. If the nuclear reaction product has atomic number different from irradiated target, it is possible separating the radioactive nuclide from irradiated target, without addition of isotopic carrier. This kind of radionuclide is named No Carrier Added, NCA, and his specific activity, As is very high and can reach values close to the theoretical Carrier Free one, CF. The experimental determination of specific activity, chemical and radiochemical purities is mandatory for all these kinds of applications.     

An analytical method for prohexadione in Chinese cabbage and apple

A residual determination method as a regulatory residue method was developed using HPLC‐UVD for prohexadione residues in Chinese cabbage (Brassica pekinensis) and apple (Malus domestica). The developed method consisted of solid–liquid extraction with acidic acetonitrile and ion‐suppression liquid–liquid partitioning, followed by anion exchange cartridge cleanup. The limits of detection and quantitation for the method were 0.005 and 0.02 mg/kg, respectively. The method gave good linearity in the range of 0.02–2.5 mg/kg. Accuracy and precision ranged from 84.1 to 94.1% and from 2.4 to 6.9%, respectively. Additionally, the confirmative conditions of LC‐MS/MS for prohexadione were set in negative electrospray ionization mode with transitions of m/z 211.4 → 167.5 and m/z 211.4 → 123.5 in the selected reaction monitoring mode. The applicability of the method was demonstrated by analyzing real samples collected from local markets in Seoul, Republic of Korea. This developed method fully deserves consideration in accordance with its sensitivity, accuracy and precision required for residue analysis of prohexadione in Chinese cabbages and apples. Copyright © 2010 John Wiley & Sons, Ltd.