Unexpected reactions associated with the xanthate‐mediated polymerization of N‐vinylpyrrolidone

The monomer N‐vinylpyrrolidone (NVP) undergoes side reactions in the presence of R group functional xanthates and impurities. The fate of the monomer NVP and a selection of six O‐ethyl xanthates during xanthate‐mediated polymerization were studied via NMR spectroscopy. A high number of by‐products were identified. Significant side reactions affecting NVP include the formation of an unsaturated dimer and hydration products in bulk or in solution in C₆D₆. In addition, the xanthate adjacent to a NVP unit was found to undergo elimination at moderate temperature (60–70 °C), resulting in unsaturated species and the formation of new xanthate species. The presence of the chlorinated compound α‐chlorophenyl acetic acid, ethyl ester, a precursor in the synthesis of the xanthate S‐(2‐ethyl phenylacetate) O‐ethyl xanthate, resulted in a dramatic increase in the rate of side reactions such as unsaturated dimer formation and a high ratio of unsaturated chain ends. The conditions for the occurrence of such side reactions are discussed in this article, with relevance to increasing the control over the polymerization kinetics, endgroup functionality, and control over the molar mass distribution. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6575–6593, 2008     

Polymer-protein conjugates from omega-aldehyde endfunctional poly(N-vinylpyrrolidone) synthesised via xanthate-mediated living radical polymerisation

Aldehyde omega-endfunctional poly(N-vinylpyrrolidone) was synthesised via quantitative conversion of a xanthate endfunctional precursor obtained via RAFT-mediated polymerisation.     

Supercritical fluid chromatography and two-dimensional supercritical fluid chromatography of polar car lubricant additives with neat CO(2) as mobile phase

Car lubricant additives are added to mineral or synthetic base stocks to improve viscosity and resistance to oxidation of the lubricant and to limit wear of engines. Their total amount in the commercial lubricant varies from a few percents to 20-25%. As they belong to various chemical classes and are added to a very complex medium, the base stock, their detailed chromatographic analysis is very difficult and time consuming as it should involve sample treatment and preparative scale separations in order to simplify the sample. The aim of this work is to determine the feasibility of the separation of low molecular weight lubricant additives using various packed columns with pure CO(2) as a mobile phase to enable implementation of flame ionisation detection as universal detector. This is part of a hypernated system including more sophisticated specific detectors, such as AED, FTIR or MS to obtain detailed structural information of compounds. This paper is devoted to the comparison of some stationary phases supposed to provide hydrocarbon group type separation (silica and normal phase) or separations on alkyl-bonded silica in non-aqueous mode of some selected classes of additives in test mixtures or in base stocks. Adsorption chromatography allows partial separation of additives from the base stocks while the direct elution of test additives can only be obtained on reversed phase supports having a very efficient silanol group protection so the interaction of the more polar compounds is much reduced. A two-dimensional scheme of analysis is also described. It combines adsorption chromatography to separate most of the polar additives from the base stock and alkyl-bonded silica for more detailed separation of the additives. However, overlapping between groups of compounds and the lack of resolution between some additives and the base stock should be addressed by the implementing of selective detectors.     

An efficient and expeditious synthesis of di- and trisubstituted amino-phenyl and -benzyl derivatives of tetrazole and [1,3,4]oxadiazol-2-one

A practical protocol for the parallel synthesis and purification of amino tetrazole and [1,3,4]oxadiazol-2-one derivatives as carboxylic acid bioisosteres is described. Phenyl- and benzyl-amines, substituted with tetrazole or [1,3,4]oxadiazol-2-one, were transformed into functionally diverse and novel compounds, with p K a values ranging from 4.9 to 8.4, by two sequential reductive alkylation reactions. These series of di- and trisubstituted amino-phenyl and -benzyl derivatives were produced in solution using solid-supported reagents and were purified by solid-phase extraction (SPE) techniques.     

Regioselective synthesis of 2,8-disubstituted 4-aminopyrido[3,2-d]pyrimidine-6-carboxylic acid methyl ester compounds

We report herein the synthesis of 4-amino-2,8-dichloropyrido[3,2-d]pyrimidine derivatives 2 and their regioselective diversification through S(N)Ar and metal-catalyzed cross-coupling reactions. While amination of 2 took place selectively at C-2, the regioselectivity of thiol or thiolate addition depended on the reaction conditions. Selective C-8 addition was obtained in DMF with Hünig's base and C-2 addition in (i)PrOH. These C-2 or C-8 regioselective thiolations provided an opportunistic way to selectively activate either of the two positions toward the metal-catalyzed cross-coupling reaction. The chloride could be efficiently substituted by Suzuki-Miyaura reaction and the sulfanyl group by Liebeskind-Srogl cross-coupling reaction, demonstrating the orthogonality of both reactive centers. The development of regioselective conditions for these different transformations yielded the synthesis of 4-amino-2,6,8-trisubstituted pyrido[3,2-d]pyrimidine derivatives, with various substituents.     

Enhanced fluidity liquid chromatography for hydrophilic interaction separation of nucleosides

The application of enhanced fluidity liquid (EFL) mobile phases to improving isocratic chromatographic separation of nucleosides in hydrophilic interaction liquid chromatography (HILIC) mode is described. The EFL mobile phase was created by adding carbon dioxide to a methanol/buffer solution. Previous work has shown that EFL mobile phases typically increase the efficiency and the speed of the separation. Herein, an increase in resolution with the addition of carbon dioxide is also observed. This increase in resolution was achieved through increased selectivity and retention with minimal change in separation efficiency. The addition of CO₂ to the mobile phase effectively decreases its polarity, thereby promoting retention in HILIC. Conventional organic solvents of similar nonpolar nature cannot be used to achieve similar results because they are not miscible with methanol and water. The separation of nucleosides with methanol/aqueous buffer/CO₂ mobile phases was also compared to that using acetonitrile/buffer mobile phases. A marked decrease in the necessary separation time was noted for methanol/aqueous buffer/CO₂ mobile phases compared to acetonitrile/buffer mobile phases. There was also an unusual reversal in the elution order of uridine and adenosine when CO₂ was included in the mobile phase.     

Access and regioselective transformations of 6-substituted 4-aryl-2,8-dichloropyrido[3,2-d]pyrimidine compounds

We report herein an efficient route for the synthesis of 2,4,8-trichloropyrido[3,2-d]pyrimidines 1 with R(1) substituents at C-6. The potential of such scaffolds was demonstrated by the possibility to displace regioselectively each aromatic chloride to introduce diversity. Sequential sulfur nucleophilic addition followed by Liebeskind-Srogl cross-coupling reaction yielded unprecedented aryl introduction at C-4 on a trichloropyrido[3,2-d]pyrimidine derivative. The reactivity difference of the remaining two chlorides toward S(N)Ar reactions was investigated. Amination yielded high C-2 regioselectivity, while thiolation was influenced by C-6 substituents, resulting in medium to high C-2 versus C-8 regioselectivity. The last chloride was efficiently displaced by S(N)Ar, Suzuki-Miyaura cross-coupling reaction, or reduction. C-2 arylation as a final step was also possible by Liebeskind-Srogl cross-coupling reaction on the previously introduced C-2 thioether. A concise and highly divergent synthetic use of 1 was developed, thereby providing an efficient approach to explore the structure-activity relationship of pyrido[3,2-d]pyrimidine derivatives such as 9, 10, 15, and 16.     

Hyphenation of atmospheric pressure chemical ionisation mass spectrometry to supercritical fluid chromatography for polar car lubricant additives analysis

Car lubricant additives are added to mineral or synthetic base stocks to improve viscosity and resistance to oxidation of the lubricant and to limit wear of engines. As they belong to various chemical classes and are added to a very complex medium, the base stock, their detailed chromatographic analysis is very difficult and time consuming. In a previous paper, it was demonstrated that supercritical fluid chromatography (SFC) allows the elution of common low-molecular-weight additives. Since their total resolution could not be achieved owing to the limited peak capacity of packed columns, the hyphenation of selective and informative detection methods such as atomic emission detection (AED) was required. Further to results obtained in SFC-AED, this work describes the hyphenation of SFC to atmospheric pressure chemical ionisation ion trap mass spectrometry (MS). SFC–MS hyphenation is detailed: temperature, flow rates of gas and mobile phase introduced in the source, position of the restrictor, ionisation additives and conditions of autotune are studied. Car lubricant monitoring requires negative and positive ionisation modes with or without the addition of ionisation auxiliary solvent according to the nature of additives. Moreover, when sensitivity is of major concern for a selected additive, the autotuning routine of the MS has to be performed in conditions as close as possible to analytical conditions, i.e. under subcritical conditions. Unambiguous identification and structure elucidation of several additives in formulated car lubricants are also presented.     

Unsymmetrical bifunctional trithiocarbonate as unexpected by-product in the synthesis of a dithioester RAFT agent

The trithiocarbonate 2-(benzylsulfanylthiocarbonylsulfanyl) propanoic acid is formed as minor by-product in the synthesis of the dithioester 2-((2-phenylthioacetyl)sulfanyl) propanoic acid via the Grignard route. The mechanism for this side reaction is not clear. The isolated trithiocarbonate may act as unsymmetrical but bifunctional RAFT agent in the aqueous polymerization of N,N-dimethyl acrylamide. Therefore, it is important to separate it completely from the dithioester before engaging the latter in controlled free radical polymerization to guarantee a maximum control.