Substituent control of hydrogen bonding in palladium(II)-pyrazole complexes

Inter- and intramolecular hydrogen bonding of an N-H group in pyrazole complexes was studied using ligands with two different groups at pyrazole C-3 and C-5. At C-5, groups such as methyl, i-propyl, phenyl, or tert-butyl were present. At C-3, side chains L-CH(2)- and L-CH(2)CH(2)- (L = thioether or phosphine) ensured formation of chelates to a cis-dichloropalladium(II) fragment through side-chain atom L and the pyrazole nitrogen closest to the side chain. The significance of the ligands is that by placing a ligating side chain on a ring carbon (C-3), rather than on a ring nitrogen, the ring nitrogen not bound to the metal and its attached proton are available for hydrogen bonding. As desired, seven chelate complexes examined by X-ray diffraction all showed intramolecular hydrogen bonding between the pyrazole N-H and a chloride ligand in the cis position. In addition, however, intermolecular hydrogen bonding could be controlled by the substituent at C-5: complexes with either a methyl at C-5 or no substituent there showed significant intermolecular hydrogen bonding interactions, which were completely avoided by placing a tert-butyl group at C-5. The acidity of two complexes in acetonitrile solutions was estimated to be closer to that of pyridinium ion than those of imidazolium or triethylammonium ions.     

Synthesis and structure of isomeric palladium(II)-pyrazole chelate complexes with and without an N-H group as hydrogen bond donor

Four new ligands containing a pyrazole ring and either a phosphine or thioether were prepared and converted to their cis-dichloropalladium(II) complexes. Two of the ligands are especially notable for the attachment of a side chain at pyrazole carbon, rather than at nitrogen. The new metal complexes include dichloro[3-(diphenylphosphinomethyl)pyrazole]palladium(II) (1-PdCl2) and dichloro[3-(methylthiomethyl)pyrazole]palladium(II) (2-PdCl2), which both feature an N-H group as a potential proton or hydrogen bond donor. For comparison, isomeric complexes lacking an NH group were prepared: dichloro[1-(diphenylphosphinomethyl)pyrazole]palladium(II) (3-PdCl2) and dichloro[1-(methylthiomethyl)pyrazole]palladium(II) (4-PdCl2). As determined by X-ray crystallography, all four complexes were found to have slightly distorted square planar geometry. Complexes 1-PdCl2 and 2-PdCl2, which contain an NH group, exhibit both intermolecular and intramolecular hydrogen bonding, whereas isomers 3-PdCl2 and 4-PdCl2 do not. Single-crystal X-ray structure determinations on the following compounds are reported: 1-PdCl2, space group P1, a = 8.4488(9) A, b = 8.9175(13) A, c = 12.731(2) A, Z = 2, V = 871.8(2) A3; 2-PdCl2, space group Pbca, a = 10.8827(10) A, b = 11.7721(7) A, c = 14.874(2) A, Z = 8, V = 1905.6 A3; 3-PdCl2, space group P2(1)/c, a = 20.520(2) A, b = 12.549(2) A, c = 13.9784(13) A, Z = 8, V = 3401.1(6) A3; 4-PdCl2, space group Pbca, a = 10.6545(10) A, b = 12.0205(11) A, c = 14.6474(14) A, Z = 8, V = 1875.9(3) A3.     

X-ray determination of the mean amplitudes of vibration and debye temperatures of some rare earth monochalcogenides

The x-ray diffraction intensities of Bragg reflections have been measured at room temperature for thulium selenide, samarium sulphide, samarium selenide and samarium telluride. On the basis of a common amplitude approximation, the Debye-Waller factor, the mean amplitude of vibration and the Debye temperature have been evaluated. The values of the Debye temperatures and mean amplitudes of vibration are 176±16°K, 0·185 ± 0·017 Å (TmSe), 155 ± 7°K, 0·244 ± 0·012 Å (SmS), 153 ± 14°K, 0·221 ± 0·020 Å (SmSe) and 151 ± 20°K, 0·204 ± 0·027 Å (SmTe).     

Double C-H activation during functionalization of phenyl(methyl)ketene on iridium(I) using alkynes. synthesis of 1,4-dien-3-ones

Under the influence of an Ir(I) metal fragment, the methyl group of phenyl(methyl)ketene undergoes two C-H activations in reacting with internal alkynes, giving metallacycles 3 in 86-94% yield. Treatment of 3 with CO liberates 1,4-dien-3-ones 5 in 81-93% yield, along with CO complex 4. A possible mechanism for the very selective double C-H activation-alkyne coupling is discussed.     

First direct structural comparison of complexes of the same metal fragment to ketenes in both C,C- and C,O-bonding modes

Using a series of Ir(I) and Rh(I) ketene complexes, conclusions about the structure and bonding of complexes of the fundamentally important ketene ligand class are reached. In a unique comparison of X-ray structures of the same metal fragment to ketenes in both the eta(2)-(C,C) and the eta(2)-(C,O) binding mode, the Ir-Cl bond distances in complexes of trans-Cl(Ir)[P(i-Pr)(3)](2) to phenylketene [4, eta(2)-(C,C)] and diphenylketene [2a, eta(2)-(C,O)] are 2.371(3) and 2.285(2) A, respectively. This would be consistent with greater trans influence of a ketene ligand bound to a metal through its C=C bond than one connected by its C=O bond. Back-bonding of Ir(I) and Rh(I) to diphenylketene was assessed using trans-Cl(M)[P(i-Pr)(3)](2)[eta(2)-(C,O)-diphenylketene] (2a and 2d). Most bond lengths and angles are identical, but slightly greater back-bonding by Ir(I) is suggested by the somewhat greater deformation of the ketene C=C=O system [C-C-O angles are 136.6(4) and 138.9(4) in the Ir and Rh cases 2a and 2d, respectively]. Syntheses of new labeled ketenes Ph(2)C=(13)C=O and Ph(2)C=C=(18)O and their Ir(I) and Rh(I) complexes are reported, along with the generation of an Ir(I) complex of PhCH=(13)C=O. The effects of isotopic substitution on infrared absorption data for ketene complexes are presented for the first time. Preliminary normal coordinate mode analysis allowed definitive assignment of absorptions ascribed to the C-O stretching frequencies of coordinated ketenes, which are near the absorptions for aromatic ring systems commonly found as substituents on ketenes. For free diphenylketene and four of its complexes and a phenylketene complex characterized by X-ray diffraction, the magnitude of the (13)C-(13)C coupling between the two ketene carbons is correlated to carbon-carbon bond distance.     

Fast identification by FAB-mass spectrometry of building blocks for oligonucleotide synthesis

Negative ion FAB-MS is recommended for the rapid routine identification of monomeric as well as oligomeric building blocks used in the phosphotriester synthesis of DNA fragments.     

Massenspektroskopische fragmentierungsreaktionen—III : Das scheinbar anomale verhalten von 3-hydroxytetrahydropyransystemen

Tetrahydropyran derivatives may lose C-2 together with a substituent from C-3 accompanied by ring contraction. This explains why, e.g., compounds derived from 3-hydroxytetrahydropyran sometimes fragment in a manner expected for an isomeric tetrahydrofuran system. The prerequisities for this rearrangement and its mechanism are discussed.     

Structures of Solvent-Free,Monomeric LiCCH,NaCCH, and KCCH

The simplest alkali metal acetylides MCCH were made in the gas phase for the first time (see drawing), and their bond lengths were determined by millimeter/submillimeter spectroscopy of their isotopomers. The M−C bond lengths r_CM are the shortest known for organoalkali metal compounds. In the case of LiCCH, the experimentally determined Li−C distance of 1.888 Å has an estimated accuracy of ±0.0005 Å, which should allow a rigorous test of theoretical methods.     

Alkyne-to-vinylidene transformation on trans-(Cl)Rh(phosphine)2: acceleration by a heterocyclic ligand and absence of bimolecular mechanism

Alkyne-to-vinylidene transformation on square-planar trans-(Cl)Rh(phosphine)2 has been proposed to proceed by a mechanism with a key step being bimolecular transfer of hydridic H to an alkynyl carbon. Labeling studies reported here are inconsistent with this pathway. In addition, an imidazolyl substituent accelerates the transformation.