2'-chloro-2',3'-dideoxy-3'-fluoro-d-ribonucleosides: synthesis,stereospecificity, some chemical transformations,and conformational analysis

The synthesis of methyl 5-O-benzoyl-2-chloro-2,3-dideoxy-3-fluoro-beta-d-ribofuranoside (5) and its use as a glycosylating agent for persilylated thymine, N(6)-benzoyladenine, and N(4)-benzoylcytosine are described (Scheme 1). The 2'-chloro-2',3'-dideoxy-3'-fluoro-d-ribonucleosides 10-12 synthesized were transformed to 2',3'-dideoxy-3'-fluoro-alpha- and -beta-d-erythro-pentofuranoside nucleosides of thymine (13a,b), adenine (14a,b), and cytidine (15a,b) by treatment with tributyltin hydride in the presence of alpha,alpha'-azobisisobutyronitrile (Scheme 2). Treatment of 2'-chloro-2',3'-dideoxy-3'-fluoro-d-ribonucleosides with 1 M MeONa/MeOH under reflux for 1-5 h afforded 2',3'-didehydro-2',3'-dideoxy-2'-chloro-d-pentofuranosyl nucleosides as the principal products (47-81%) of the reaction, along with recovered starting nucleoside (11-33%) (Scheme 3). Easy HF elimination was also observed in the case of the 2'-azido-2',3'-dideoxy-3'-fluoro-beta-d-ribofuranosides of thymine (17) and adenine (20) (Scheme 3). The role of conformational peculiarities of 2'-chloro-2',3'-dideoxy-3'-fluoro-d-ribonucleosides as well as of 17 and 20 in the observed exclusive elimination of HF is discussed. The conformational analysis of a rather broad palette of 2,3-dideoxy-3-fluoro-2-(X-substituted)-d-ribofuranosides was performed with the aid of the PSEUROT (version 6.3) program, using (i) the recently reparametrized Karplus-type relation (Chattopadhyaya and co-workers. J. Org. Chem. 1998, 63, 4967) and (ii) empirical bond angle correction terms suggested by us. The predictive power of the Brunck and Weinhold model (J. Am. Chem. Soc. 1979, 101, 1700) of the gauche effect between atoms and groups as a conformational driving force acting upon the pentofuranose ring is explored. Their model invokes maximum antiperiplanar sigma <--> sigma stabilization when the donating bond is the least polar one and the acceptor orbital is at the most polarized bond and is found at least as satisfactory, and in various specific cases more so than, as rationalizations on the basis of the preference of the gauche vs the trans conformation of two vicinal electronegative substituents (Wolfe. Acc. Chem. Res. 1972, 5, 102).     

Aperiodic metal–organic frameworks

Metal–organic frameworks (MOFs) represent one of the most diverse structural classes among solid state materials, yet few of them exhibit aperiodicity, or the existence of long-range order in the absence of translational symmetry. From this apparent conflict, a paradox has emerged: even though aperiodicity frequently arises in materials that contain the same bonding motifs as MOFs, aperiodic structures and MOFs appear to be nearly disjoint classes. In this perspective, we highlight a subset of the known aperiodic coordination polymers, including both incommensurate and quasicrystalline structures. We further comment upon possible reasons for the absence of such structures and propose routes to potentially access aperiodic MOFs.

This perspective discusses progress and future directions in metal–organic frameworks with aperiodic structures. Reported quasicrystalline and incommensurate materials are presented, and pathways towards designing new such materials are provided.     

Synthesis and Conformational Analysis of 1′‐ and 3′‐Substituted 2‐Deoxy‐2‐fluoro‐D‐ribofuranosyl Nucleosides

Convergent syntheses of the 9‐(3‐X‐2,3‐dideoxy‐2‐fluoro‐β‐D ‐ribofuranosyl)adenines 5 (X=N₃) and 7 (X=NH₂), as well as of their respective α‐anomers 6 and 8 , are described, using methyl 2‐azido‐5‐O‐benzoyl‐2,3‐dideoxy‐2‐fluoro‐β‐D ‐ribofuranoside ( 4 ) as glycosylating agent. Methyl 5‐O‐benzoyl‐2,3‐dideoxy‐2,3‐difluoro‐β‐D ‐ribofuranoside ( 12 ) was prepared starting from two precursors, and coupled with silylated N⁶‐benzoyladenine to afford, after deprotection, 2′,3′‐dideoxy‐2′,3′‐difluoroadenosine ( 13 ). Condensation of 1‐O‐acetyl‐3,5‐di‐O‐benzoyl‐2‐deoxy‐2‐fluoro‐β‐D ‐ribofuranose ( 14 ) with silylated N²‐palmitoylguanine gave, after chromatographic separation and deacylation, the N⁷‐β‐anomer 17 as the main product, along with 2′‐deoxy‐2′‐fluoroguanosine ( 15 ) and its N⁹‐α‐anomer 16 in a ratio of ca. 42 : 24 : 10. An in‐depth conformational analysis of a number of 2,3‐dideoxy‐2‐fluoro‐3‐X‐D ‐ribofuranosides (X=F, N₃, NH₂, H) as well as of purine and pyrimidine 2‐deoxy‐2‐fluoro‐D ‐ribofuranosyl nucleosides was performed using the PSEUROT (version 6.3) software in combination with NMR studies.     

Switchable electrical conductivity in a three-dimensional metal–organic framework via reversible ligand n-doping

Redox-active metal–organic frameworks (MOFs) are promising materials for a number of next-generation technologies, and recent work has shown that redox manipulation can dramatically enhance electrical conductivity in MOFs. However, ligand-based strategies for controlling conductivity remain under-developed, particularly those that make use of reversible redox processes. Here we report the first use of ligand n-doping to engender electrical conductivity in a porous 3D MOF, leading to tunable conductivity values that span over six orders of magnitude. Moreover, this work represents the first example of redox switching leading to reversible conductivity changes in a 3D MOF.

Redox-active ligands are used to reversibly tune electrical conductivity in a porous 3D metal–organic framework (MOF).     

Regio- and stereoselective syntheses of l-pentose derivatives from l-arabinose

Novel l-arabinose, l-ribose, 2-deoxy-l-ribose and 2-fluoro-2-deoxy-l-arabinose derivatives were synthesized from readily available l-arabinose. Different synthetic routes to methyl 3,5-di-O-acylated-l-arabino(ribo)furanosides as valued intermediates for the preparation of C-2 functionalized l-pentoses were investigated via regioselective transformations of 1,2-di-O-acetyl-3,5-di-O-pivaloyl-l-arabinofuranose, and selective acylation of methyl l-arabinofuranoside with 4-chlorobenzoyl or pivaloyl chloride. Short three-five-step syntheses of methyl 2-deoxy-α-l-ribofuranoside, its 3,5-di-O-acyl derivatives, valuable precursors for preparation of antiviral 2′-deoxy-l-nucleosides, were accomplished via simple and efficient reduction of methyl 2-O-mesyl-l-arabinofuranoside with L-Selectride or tandem reaction involving a complex hydride 2-deoxygenation/acylation of intermediate 2-deoxysugar. A new synthesis of 2′-deoxy-2′-fluoro-β-l-arabinofuranosyl thymine (l-FMAU) was performed using a mild fluorination of protected l-ribofuranoside and a novel sequence of conversions for the preparation of 2-deoxy-2-fluoro-l-arabinofuranoside derivatives.     

Reactions of 2- and 4-pyrones with secondary phosphine chalcogenides: a facile synthesis of functional phosphorylated pyrones

The oxidative cross-coupling between 4-hydroxy-6-methyl-2-pyrone or 3-hydroxy-2-methyl-4-pyrone and secondary phosphine chalcogenides proceeds in CCl₄/Et₃N under mild conditions (20–52 °С, 0.75–10 h) through the hydroxyl group to give O-(6-methyl-2-oxo-2H-pyran-4-yl) diorganylphosphinochalcogenoates or O-(2-methyl-4-oxo-4H-pyran-3-yl) diorganylphosphinochalcogenoates, in high yields.     

Interactions in Cp2TiX-AlH3−nXn-Et2O(NEt3) systems

Summary Cp₂TiX-AlH_3–nX_n-Et₂O(NEt₃) systems where X is Cl or Br, and n=0 or 1 have been studied by dielectrometric and calorimetric titration and by e.s.r. techniques. Bimetallic 11 compounds containing hydrogen bridges are formed in all systems. All reaction products, with the exception of Cp₂TiH₂AlHCl · Et₂O formed at 20 to 25°, are monomeric in solution. The monochloro derivative is a dimer containing both ordinary and double hydrogen bridges.     

Reactions of 2-phenylpyrrole with bromobenzoylacetylene on metal oxides active surfaces

The solvent-free interaction of 2-phenylpyrrole with bromobenzoylacetylene (room temperature) upon their grinding with solid metal oxides (MgO, CaO, ZnO, BaO, Al₂O₃, TiO₂, ZrO₂) and salts (CaCO₃, ZrSiO₄) leads to either the cross-coupling product or the adduct of pyrrole addition to the riple bond of acetylene. The ethynylation is accompanied by the formation of intermediate and side products: E-2-(1-bromo-2-benzoylethenyl)-5-phenylpyrrole and 1,1-di(5-phenylpyrrol-2-yl)-2-benzoylethene. The activity of the metal oxides in the ethynylation reaction falls in the order (in the brackets, the content of 2-benzoylethynyl-5-phenylpyrrole in the reaction mixture is given): ZnO (81%), BaO (73%), Al₂O₃ (71%), MgO (69%), CaO (50%). The oxides, SiO₂, TiO₂, ZrO₂, and the salts, CaCO₃ and ZrSiO₄, are inactive in the ethynylation reaction affording only the intermediate adduct, with ZrO₂ the isolated yield of the bromoethenylpyrrole reaching 60%. ESR monitoring shows the reaction to start from one electron transfer from pyrrole to acetylene mediated by the oxide surface. The adduct is readily converted on Al₂O₃ to 2-(benzoylethynyl)-5-phenylpyrrole crystallized mostly as cis-rotamer (X-ray data).     

Hybrid membranes based on short side chain perfluorinated sulfonic acid membranes (Inion) and heteropoly acid salts

1. Download high-res image (217KB)
2. Download full-size image

     

Ammine magnesium borohydride complex as a new material for hydrogen storage: structure and properties of Mg(BH4)2.2NH3

The ammonia complex of magnesium borohydride Mg(BH4)2.2NH3 (I), which contains 16.0 wt % hydrogen, is a potentially promising material for hydrogen storage. This complex was synthesized by thermal decomposition of a hexaaammine complex Mg(BH4)2.6NH3 (II), which crystallizes in the cubic space group Fm3 m with unit cell parameter a=10.82(1) A and is isostructural to Mg(NH3) 6Cl2. We solved the structure of I that crystallizes in the orthorhombic space group Pcab with unit cell parameters a=17.4872(4) A, b=9.4132(2) A, c=8.7304(2) A, and Z=8. This structure is built from individual pseudotetrahedral molecules Mg(BH4)2.2NH3 containing one bidentate BH4 group and one tridentate BH4 group that pack into a layered crystal structure mediated by N-H...H-B dihydrogen bonds. Complex I decomposes endothermically starting at 150 degrees C, with a maximum hydrogen release rate at 205 degrees C, which makes it competitive with ammonia borane BH 3NH3 as a hydrogen storage material.