Multiferroic TbMnO3 nanoparticles

We report on the synthesis of TbMnO₃ nanoparticles by chemical co-precipitation route and their structural, chemical bonding, magnetic and dielectric properties. It is shown that the interesting multiferroic properties of this system as reflected by the concurrent occurrence of magnetic and dielectric transitions are retained in the nanoparticles (size∼40 nm). However, the nanoparticle constitution and properties are seen to depend significantly on the calcination temperature. While the nanoparticles obtained by calcination at 800 °C correspond very well with the reported properties of single phase TbMnO₃ (all the key magnetic and dielectric features near 7, 27 and 41 K, albeit with reduced dielectric constant) the nanoparticles obtained by calcination at 900 °C develop a Tb deficient skin which softens the transitions, reducing the dielectric constant further.     

A note on density matrix extrapolation and multiple solutions of the unrestricted Hartree–Fock equations

Unrestricted Hartree–Fock (UHF) SCF–MO calculations on the doublet reaction surface for the addition of methylidyne (CH) to ethylene (C₂H₄) using the standard extrapolation techniques of the GAUSSIAN 70 program show erratic behavior. On the other hand, the potential energy surface calculated without extrapolation of the density matrix and by using the final density matrix of a neighboring point as the initial guess for the density matrix for the new point gave a smooth potential curve without any kinks or erratic pattern. Therefore, the density extrapolation technique should be used with particular caution in UHF calculations.     

Indium-doped ZnOas efficient photosensitive material for sunlight driven hydrogen generation and DSSC applications: integrated experimental and computational approach

Electricity generation using simple and cheap dye-sensitized solar cells and photocatalytic water splitting to produce future fuel, hydrogen, directly under natural sunlight fascinated the researchers worldwide. Herein, synthesis of indium-doped wurtzite ZnO nanostructures with varying molar percentage of indium from 0.25 to 3.0% with concomitant characterization indicating wurtzite structure is reported. The shift of (002) reflection plane to higher 2θ degree with increase in indium-doping thus is a clear evidence of doping of indium in zinc oxide nanoparticles. Surface morphological as well as microstructural studies of In@ZnO exhibited generation of ZnO nanoparticles and nanoplates of diameter 10–30 nm. The structures have been correlated well using computational density functional (DFT) studies. Diffuse reflectance spectroscopy depicted the extended absorbance of these materials in the visible region. Hence, the photocatalytic activity towards hydrogen generation from water under natural sunlight as well as efficient DSSC fabrication of these newly synthesized materials has been demonstrated. In-doped ZnO exhibited enhanced photocatalytic activity towards hydrogen evolution (2465 μmol/h/g) via water splitting under natural sunlight. DSSC fabricated using 2% In-doped ZnO exhibited an efficiency of 3.46% which is higher than other reported In-doped ZnO based DSSCs.

     

Semiconductor Nanoparticles

Semiconductor nanoparticles exhibit size dependent properties, when their size is comparable to the size of Bohr diameter for exciton. This can be exploited to increase fluorescence efficiency or increase the internal magnetic field strength in doped semiconductors. Nanoparticles are usually unstable and can aggregate. It is therefore necessary to protect them. Surface passivation using capping molecules or by making core–shell particles are some useful ways. Here synthesis and results on doped and un-doped nanoparticles of ZnS, CdS and ZnO will be discussed. We shall present results on core–shell particles using some of these nanoparticles and also discuss briefly the effect of Mn doping on hyperfine interactions in case of CdS nanoparticles.     

Titania nanoparticles synthesis in mesoporous molecular sieve MCM-41

Nanocrystalline titanium oxide (TiO(2)) is one of the most useful oxide material, because of its widespread applications in photocatalysis, solar energy conversion, sensors and optoelectronics. The control of particle size and monodispersity of TiO(2) nanoparticles is a challenging task. The use of MCM-41, an inorganic template of uniform pore size (2-10 nm), can overcome this difficulty and produce stable nanoparticles of uniform size and shape. Here, we demonstrate the synthesis of titania nanoparticles inside the pores of silica based MCM-41 forming a TiO(2)/Si-MCM composite. Composites are formed in the alcoholic medium by incipient wetness impregnation method. Titania particles of average 3 nm size are obtained. Effect of silica and titania precursors on the quality of nanoparticles has been investigated. The characterization of titania-MCM-41 composites has been carried out using a variety of techniques like UV-vis absorption spectroscopy, X-ray diffraction, FT-IR spectroscopy, X-ray photoelectron spectroscopy, transmission electron microscopy and photoluminescence spectroscopy. It has been found that the titania particles are co-ordinated with Si-MCM by SiOTi covalent bond.     

Triangular CdS nanostructure: effect of Mn doping on photoluminescence,electron spin resonance,and magneto-optical properties

In this paper, we report synthesis and study of magneto-optic Faraday effect for dilute magnetic semiconductor nanostructure. The colloidal CdS nanocrystals were prepared via hot injection method and successfully doped with Mn²⁺ cations. The synthesized nanoparticles were characterized by using UV–Vis spectroscopy, X-ray diffraction, photoluminescence spectroscopy, transmission electron microscopy, and electron spin resonance spectroscopy. Systematic studies on effect of Mn²⁺ doping on photoluminescence, electron spin resonance, and magneto-optical properties are carried out. UV–Vis spectral analysis confirms blue shift in bandgap of CdS nanoparticles due to quantum confinement effect. The X-ray diffraction study confirms hexagonal wurtzite phase formation of CdS nanoparticles without any impurity phases. TEM analysis confirms uniform particle size, having particle size distribution around 5 nm. As-synthesized undoped CdS shows triangular-shaped nanocrystals with hexagonal structure; however, triangular shape of CdS nanoparticles is not conserved after Mn²⁺ doping. The photoluminescence characteristic spectra of Mn²⁺-doped CdS nanocrystals showed emission band at 660 nm and its intensity was found to increase with increasing Mn²⁺ concentration. Electron spin resonance signal, with six-line hyperfine structure splitting, confirmed doping of Mn²⁺ ions in CdS lattice. Magneto-optic measurements showed linear variation of Faraday rotation with respect to applied magnetic field, indicating paramagnetic behavior of Mn-doped CdS. The highest Verdet constant 24.81 deg/T cm was observed for 2% Mn-doped CdS nanocrystals, which further decreases with increasing Mn²⁺ concentration.

Open image in new window

Graphical abstract Illustration of Magneto-optic Faraday effect using dilute magnetic semiconductors (TEM image of triangular CdS nanoparticles)

     

Relaxation in torsional motion of triplet oxirane

The rotational barrier height E_rot in the lowest triplet state oxirane molecule was calculated to be 26.3 kcal/mole using a double zeta basis set with partial geometry optimization. This suggest ldrelaxedrd rotation and the computed e(T₁- E(S_o) + E_rot value is commensurate with the enthalpy change for the oxirane-forming O(³P) + C₂H₄ reaction, thus providing a rationale for the stereochemical features of the reaction.     

Analysis of PPMMA films from oxygen plasma using X-ray photoelectron spectroscopy

Plasma polymerized methyl methacrylate (PPMMA) films have been synthesised on silicon substrates in RF glow discharge using oxygen plasma. The electron beam delineation sensitivity of the PPMMA films has been studied systematically by varying oxygen and monomer flow rates. X-ray photoelectron spectroscopy (XPS) analysis clearly illustrates how C/O ratio in the films determines the properties of PPMMA films as electron beam resist. © 1994 John Wiley & Sons, Inc.     

A Simple and Sensitive HPTLC Method for Quantitative Analysis of Pantoprazole Sodium Sesquihydrate in Tablets

JPC – Journal of Planar Chromatography – Modern TLC - A simple, rapid, and reliable HPTLC method has been established for determination of pantoprazole sodium sesquihydrate in tablets....