Thioxanthone–carbazole as a visible light photoinitiator for free radical polymerization

A thioxanthone (TX) derivative with the additional carbazole chromophore, namely thioxanthone‐carbazole (TX‐C) was synthesized and characterized. The photophysical properties and its efficiency to polymerize methyl methacrylate both in the presence and absence of N,N‐dimethylaniline (DMA) as coinitiator was investigated and compared with that of the commercially available TX. TX‐C was found to display better photophysical properties and in both cases initiate polymerization more efficiently. Detailed real‐time Fourier transform infrared studies revealed that high polymerization rates can be obtained when TX‐C in conjunction with DMA was used. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Validation of a FBC model for co-firing of hazelnut shell with lignite against experimental data

Performance of a comprehensive system model extended for modelling of co-firing of lignite and biomass was assessed by applying it to METU 0.3 MW_t Atmospheric Bubbling Fluidized Bed Combustor co-firing lignite with hazelnut shell and validating its predictions against on-line temperature and concentration measurements of O₂, CO₂, CO, SO₂ and NO along the same test rig fired with lignite only, lignite with limestone addition and lignite with biomass and limestone addition. The system model accounts for hydrodynamics; volatiles release and combustion, char combustion, particle size distribution for lignite and biomass; entrainment; elutriation; sulfur retention and NO formation and reduction, and is based on conservation equations for energy and chemical species. Special attention was paid to different devolatilization characteristics of lignite and biomass. A volatiles release model based on a particle movement model and a devolatilization kinetic model were incorporated into the system model separately for both fuels. Kinetic parameters for devolatilization were determined via thermogravimetric analysis. Predicted and measured temperatures and concentrations of gaseous species along the combustor were found to be in good agreement. Introduction of biomass to lignite was found to decrease SO₂ emissions but did not affect NO emissions significantly. The system model proposed in this study proves to be a useful tool in qualitatively and quantitatively simulating the processes taking place in a bubbling fluidized bed combustor burning lignite with biomass.     

Complex macromolecular structures from stable radical containing block copolymers

A novel synthetic strategy for the synthesis of graft copolymers is reported. Block copolymers containing segments with stable nitroxyl radicals side groups were first prepared by anionic polymerization, which were then used as a precursor for the subsequent nitroxide-mediated radical polymerization (NMRP) of styrene. This way, block–graft copolymers with polystyrene side chains grafted from one of the blocks were successfully synthesized in a controlled manner. In addition, block–graft copolymers with grafted polystyrene chains and a poly(tert-butyl methacrylate) block were subjected to hydrolysis to yield the corresponding amphiphilic polymers. The structures and the molecular weight characteristics of the polymers were characterized by spectral and chromatographic analyses. The surface morphology of thus obtained polymers was also investigated by microscopic techniques. © 2019 Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 62–69     

A versatile approach for the preparation of end‐functional polymers and block copolymers by stable radical exchange reactions

A versatile strategy for the preparation of end‐functional polymers and block copolymers by radical exchange reactions is described. For this purpose, first polystyrene with 2,2,6,6‐tetramethylpiperidine‐1‐oxyl end group (PS‐TEMPO) is prepared by nitroxide‐mediated radical polymerization (NMRP). In the subsequent step, these polymers are heated to 130 °C in the presence of independently prepared TEMPO derivatives bearing hydroxyl, azide and carboxylic acid functionalities, and polymers such as poly(ethylene glycol) (TEMPO‐PEG) and poly(ε‐caprolactone) (TEMPO‐PCL). Due to the simultaneous radical generation and reversible termination of the polymer radical, TEMPO moiety on polystyrene is replaced to form the corresponding end‐functional polymers and block copolymers. The intermediates and final polymers are characterized by ¹H NMR, UV, IR, and GPC measurements. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2387–2395     

PLGA encapsulation and radioiodination of indole-3-carbinol: investigation of anticancerogenic effects against MCF7, Caco2 and PC3 cells by in vitro assays

Encapsulation with PLGA of I3C and radioiodination have been performed. Anticancerogenic effects of I3C and I3C-PLGA have been investigated utilizing in vitro methods on breast adenocarcinoma epithelial (MCF7), colon adenocarcinoma epithelial (Caco2), prostate carcinoma epithelial (PC3) cells. Characterization of I3C-PLGA have been performed with DLS method and SEM analysis. I3C and I3C-PLGA compounds have been radiolabeled in high yields with ¹³¹I which is widely used for diagnosis and treatment in Nuclear Medicine. All experimental results demonstrated that radioiodinated compounds are promising in order to be used in Nuclear Medicine as well as present study contributed previously reported studies.     

A low-band gap conductive copolymer of bis-3-hexylthiophene substituted 4-tert-butylphenyl quinoxaline and 3,4-ethylenedioxythiophene

Electrochemical copolymerization of 2,3-bis(4-tert-butylphenyl)-5,8-bis(4-hexylthiophen-2-yl)quinoxaline (HTQ) and 3,4-ethylenedioxythiophene (EDOT) was performed to fulfill a strategy in achieving fine-tuned electrochromic properties. The copolymer, P(HTQ-co-EDOT) was characterized via detailed studies of cyclic voltammetry and spectroelectrochemistry. Copolymer film has many superior properties compared to the parent homopolymer. E _g of the copolymer was calculated as 1.4 eV, which is substantially lower than the homopolymer’s (PHTQ) band gap, which was reported as 1.75 eV. Optical contrast of the resultant copolymer was shown to be 34%, which is nearly 10% higher than the PHTQ. The most striking achievement in the electrochromic properties was in switching times. The copolymer switches very rapidly between its neutral and the oxidized states and achieves a 34% optical contrast in less than 1 s, half of the value for the pristine polymer.     

Modification of polysulfones by click chemistry: Amphiphilic graft copolymers and their protein adsorption and cell adhesion properties

Well‐defined amphiphilic graft copolymer with hydrophobic polysulfone (PSU) backbone and hydrophilic poly(acrylic acid) (PAA) side chains were synthesized and characterized. For this purpose, commercially available PSU was converted to azido‐functionalized polymer (PSU‐N₃) by successive chloromethylation and azidation processes. Independently, poly(tert‐butyl acrylate) (PtBA) with an alkyne‐end‐group is obtained by using suitable initiator in atom transfer radical polymerization (ATRP). Then, this polymer was successfully grafted onto PSU‐N₃ by click chemistry to yield polysulfone‐graft‐poly(tert‐butyl acrylate), (PSU‐g‐PtBA). Finally, amphiphilic polysulfone‐graft‐poly(acrylic acid), (PSU‐g‐PAA), membranes were obtained by hydrolyzing precursor the PSU‐g‐PtBA membranes in trifluoroacetic acid. The final polymer and intermediates at various stages were characterized by ¹H NMR, FTIR, GPC, and SEM analyses. Protein adsorption and eukaryotic and prokaryotic cell adhesion on PSU‐g‐PAA were studied and compared to those of PSU‐g‐PtBA and unmodified PSU. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Diazonium salts for surface‐confined visible light radical photopolymerization

The surface chemistry of aryl diazonium salts has progressed at a remarkable pace in the last two decades, and opened many avenues in materials science. These compounds are excellent coupling agents for polymers to surfaces via several surface‐confined polymerization methods. For the first time, we demonstrate that diazonium salts are efficient for surface initiating radical photopolymerization in the visible light of methyl methacrylate (MMA) and 2‐hydroxyethyl methacrylate (HEMA) taken as model monomers. To do so, 4‐(dimethylamino)benzenediazonium salt was electroreduced on gold plates or flexible ITO sheets to provide 4‐(dimethylamino)phenyl (DMA) hydrogen donor layers; while excited state camphorquinone acted as the free hydrogen abstractor. In the same way, we co‐polymerized HEMA and MMA with ethylene glycol dimethacrylate in order to obtain crosslinked polymer grafts. We demonstrate by XPS that gold was efficiently screened by the polymer layers and that the wettability of the surfaces accounts for the hydrophilic or hydrophobic characters of the tethered polymers. Homo‐ and crosslinked PMMA grafts were found to resist removal by the paint stripper methyl ethyl ketone. The grafted DMA/camphorquinone system operating in the visible light holds great promises in terms of adhesion of in situ designed continuous or patterned polymer coatings on various substrates. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3506–3515     

Investigation of heat capacities of proteins by statistical mechanical methods

In this study additional heat capacity of the proteins in water dissociation have been investigated by statistical mechanical methods. For this purpose, taking electric field E$E$ and total dipole moment M$M$ as thermodynamical variables and starting with the first law of thermodynamics, an expression which reveals the thermodynamical relation between additional heat capacity in effective electric field Δ_CE$\mathrm{\Delta }{C}_E$ and additional heat capacity at the constant total dipole moment Δ_CM$\mathrm{\Delta }{C}_M$, has been obtained. It is found that, difference between the heat capacities depends linearly on temperature. To establish the hydration effect during the folding and unfolding of the proteins, physical properties of the apolar dissociation have been used [G. Oylumluoglu, et al., Physica A 361 (2006) 255–262]. In the thermodynamical investigation of the protein system, in order to introduce the chemical potential μ$\mu$ (here it takes place of pH), one has to consider the system as a macro-canonical ensemble. In this study, the macro-canonical ensemble is obtained from the canonical ensemble. In this approach the proteins are taken in a heat bath, and also it is supposed that the system is in a particle reservoir. When this reservoir reaches to an equilibrium the number of particles take an average value. In this study, with the purpose of revealing the additional effect to the heat capacity, the partition functions of the proteins obtained in single protein molecule approach are taken. In this way, additional free energy has been related to heat capacities. Calculating the heat capacity Δ_CE$\mathrm{\Delta }{C}_E$ and taking the heat capacity at constant total dipole moment Δ_CM$\mathrm{\Delta }{C}_M$ from the experimental data, the outcomes of the performed calculations have been investigated for Myoglobin and other proteins.     

Synthesis and pyrolysis of ABC type miktoarm star copolymers with polystyrene,poly(lactic acid) and poly(ethylene glycol) arms

An ABC type miktoarm star copolymer possessing polystyrene (PS), poly(lactic acid) (PLA) and poly(ethylene glycol) (PEG) arms was synthesized by combining Atom Transfer Radical Polymerization (ATRP) and Ring Opening Polymerization (ROP) with two click chemistries, namely thiol–ene and copper catalyzed azide–alkyne cycloaddition (CuAAC). For this purpose, a core 1-(allyloxy)-3-azidopropan-2-ol with allyl and azide functionalities was synthesized in two steps. Then, clickable polymers, polystyrene with thiol functionality (PS–SH) and poly(ethylene glycol) with alkyne functionality (PEG–acetylene) were independently prepared. As the first step of the grafting onto process, PS–SH was thiol–ene clicked onto the core to yield PS–N₃–OH. The second arm was then incorporated onto the core by the Ring Opening Polymerization (ROP) of l-(?)-Lactide (LA) using as PS–N₃–OH initiator and tin(II) 2-ethylhexanoate as catalyst. Finally, alkyne–PEG–acetylene was bonded to the resulting PLA–PS–N₃ using CuAAC click reaction. All intermediates, related polymers at different stages and final PS–PLA–PEG miktoarm star copolymer were characterized by ¹H NMR, FT-IR, SEC and DP-MS analyses. Direct pyrolysis mass spectrometry, (DP-MS) analyses of PS–PLA–PEG and all intermediate polymers indicated that the decomposition of PS and PEG chains occurred almost independently, following the degradation mechanisms of the corresponding homopolymers. On the other hand, during the pyrolysis of PS–PLA–PEG, elimination of H₂O during the decomposition of PEG chains at the early stages of pyrolysis caused hydrolysis of PLA chains and increased the yields of CO₂, CO and units involving unsaturation and/or crosslinked structure.