Specific features of the optical spectra in Tl2In2S3Se layered single crystals

The optical properties of Tl₂In₂S₃Se layered single crystals have been studied by means of transmission and reflection measurements in the wavelength range of 450‐1100 nm. The analysis of the absorption data revealed the presence of both optical indirect and direct transitions with energy band gaps of 2.16 and 2.42 eV, respectively. The observed coexistence of indirect and direct energy band gaps is related to the anisotropy of the Tl‐containing layered crystals. The dispersion of the refractive index is discussed in terms of the Wemple‐DiDomenico single‐effective‐oscillator model. The refractive index dispersion parameters: oscillator energy, dispersion energy, oscillator strength and zero‐frequency refractive index were found to be 4.78 eV, 43.58 eV, 13.18 × 10¹³ m^–2 and 3.18, respectively. From X‐ray powder diffraction study, the parameters of monoclinic unit cell were determined. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Refractive index, oscillator parameters and temperature-tuned energy band gap of Tl4In3GaS8-layered single crystals

Transmission and reflection measurements in the wavelength region 450-1100 nm were carried out on Tl₄In₃GaS₈-layered single crystals. The analysis of the room temperature absorption data revealed the presence of both optical indirect and direct transitions with band gap energies of 2.32 and 2.52 eV, respectively. The rate of change of the indirect band gap with temperature dE_gi/dT=-6.0×10⁻⁴ eV/K was determined from transmission measurements in the temperature range of 10-300 K. The absolute zero value of the band gap energy was obtained as E_gi(0)=2.44 eV. The dispersion of the refractive index is discussed in terms of the Wemple-DiDomenico single-effective-oscillator model. The refractive index dispersion parameters: oscillator energy, dispersion energy, oscillator strength and zero-frequency refractive index were found to be 4.87 eV, 26.77 eV, 8.48×10¹³ m⁻² and 2.55, respectively.     

Analysis of food for toxic elements

The levels of the toxic elements Al, As, Cd, Hg, Pb and Sn are routinely monitored in food to protect the consumer. Increasingly, the chemical forms of As and Hg are also monitored. Analyses are performed to enforce regulatory standards and to accumulate background levels for assessing long-term exposure. The analytical procedures used for these activities evolve as requirements to determine lower levels arise and as both the types and sheer number of different foods that need to be analyzed increase. This review highlights recent work addressing improvements in the analysis of toxic elements in food. The topics covered include contamination control, analytical sample treatment and the common analytical techniques used for food analysis.     

Optical constants of Tl4Ga3InSe8 layered single crystals

The optical properties of Tl₄Ga₃InSe₈ layered single crystals have been studied by means of transmission and reflection measurements in the wavelength range of 500–1100 nm. The analysis of the room temperature absorption data revealed the presence of both optical indirect and direct transitions with band gap energies of 1.94 and 2.20 eV, respectively. Transmission measurements carried out in the temperature range of 10–300 K revealed that the rate of change of the indirect band gap with temperature is γ=−4.1×10⁻⁴ eV/K. The absolute zero value of the band gap energy was obtained as E_gi(0)=2.03 eV. The dispersion of the refractive index is discussed in terms of the Wemple–DiDomenico single-effective-oscillator model. The refractive index dispersion parameters: oscillator energy, dispersion energy, oscillator strength and zero-frequency refractive index were found to be 4.10 eV, 23.17 eV, 6.21×10¹³ m⁻² and 2.58, respectively. From X-ray powder diffraction study, the parameters of monoclinic unit cell were determined.     

Treatment of silk production wastewaters by membrane processes for sericin recovery

Sericin protein, although a valuable resource for many industries including cosmetics, pharmaceutical and biomedical, has been discarded as a waste in silk industry, causing environmental pollution. This paper describes determination of a membrane-based process for sericin recovery from cocoon cooking wastewaters (CCW) that will enable value-added utilization of waste sericin. The iso-electric point (pI) of sericin was found as 5–6, whose MW was distributed as 180–200, 70–80, 30–40 and 10–25 kDa. Prior to membrane filtration, sericin was separated from other impurities via centrifugation (CFG) followed by microfiltration (MF) in the pre-treatment stage, which also helped minimize post membrane fouling. Ultrafiltration (UF) and nanofiltration (NF) were adopted at a pH equal to pI of sericin. UF achieved partial recovery of sericin polypeptides at 37–60%, which was attributed to increased transmission of uncharged sericin polypeptides at their pI. On the other hand, NF achieved sericin recovery as high as 94–95%, containing all MW fractions. Severe flux decline was the major problem due to protein–membrane interactions and high sericin concentrations, where concentration polarization mainly had a dominant effect. Although flux declines were as high as 58–88% in UF and 70–75% in NF, flux recovery by at least 83% was achieved by chemical cleaning using NaOH and free chlorine.     

Temperature and excitation intensity tuned photoluminescence in Tl4GaIn3S8 layered single crystals

Photoluminescence spectra of Tl₄GaIn₃S₈ layered crystals grown by Bridgman method have been studied in the wavelength region of 500–780 nm and in the temperature range of 26–130 K with extrinsic excitation source (λ_exc = 532 nm), and at T = 26 K with intrinsic excitation source (λ_exc = 406 nm). Three emission bands A, B and C centered at 514 nm (2.41 eV), 588 nm (2.11 eV) and 686 nm (1.81 eV), respectively, were observed for extrinsic excitation process. Variations in emission spectra have been studied as a function of excitation laser intensity in the 0.9‐183.0 mW cm^–2 range for extrinsic excitation at T = 26 and 50 K. Radiative transitions from the donor levels located at 0.03 and 0.01 eV below the bottom of the conduction band to the acceptor levels located at 0.81 and 0.19 eV above the top of the valence band were proposed to be responsible for the observed A‐ and C‐bands. The anomalous temperature dependence of the B‐band peak energy was explained by configurational coordinate model. From X‐ray powder diffraction and energy dispersive spectroscopic analysis, the monoclinic unit cell parameters and compositional parameters of Tl₄GaIn₃S₈ crystals were determined, respectively. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Preparation and characterization of a suite of ephedra-containing standard reference materials

The National Institute of Standards and Technology, the U.S. Food and Drug Administration, Center for Drug Evaluation and Research and Center for Food Safety and Applied Nutrition, and the National Institutes of Health, Office of Dietary Supplements, are collaborating to produce a series of Standard Reference Materials (SRMs) for dietary supplements. A suite of ephedra materials is the first in the series, and this paper describes the acquisition, preparation, and value assignment of these materials: SRMs 3240 Ephedra sinica Stapf Aerial Parts, 3241 E. sinica Stapf Native Extract, 3242 E. sinica Stapf Commercial Extract, 3243 Ephedra-Containing Solid Oral Dosage Form, and 3244 Ephedra-Containing Protein Powder. Values are assigned for ephedrine alkaloids and toxic elements in all 5 materials. Values are assigned for other analytes (e.g., caffeine, nutrient elements, proximates, etc.) in some of the materials, as appropriate. Materials in this suite of SRMs are intended for use as primary control materials when values are assigned to in-house (secondary) control materials and for validation of analytical methods for the measurement of alkaloids, toxic elements, and, in the case of SRM 3244, nutrients in similar materials.     

Determination of trapping parameters in n-Ga4Se3S by thermally stimulated current measurements

Thermally stimulated current (TSC) measurements were carried out on as-grown n-Ga₄Se₃S layered crystals in the temperature range 10–300 K. The experimental data were analysed by using different heating rates, initial rise, curve fitting and isothermal decay methods. The results of the analysis showed good agreement with each other. The measurements revealed the presence of one trapping level with activation energy of 23 meV. The corresponding capture cross-section and concentration of traps were found to be 2.2 × 10^?23 cm² and 2.9 × 10¹¹ cm^?3, respectively. TSC experiments showed the presence of an exponential distribution of electron-trapping states in Ga₄Se₃S crystal. The variation of one order of magnitude in the trap density for every 34 meV was obtained.     

Element and radionuclide concentrations in food: FDA Total Diet Study 1991-1996

Food purchased throughout the United States during 1991-1997 under the U.S. Food and Drug Administration's Total Diet Study (TDS) program were analyzed for elements and radionuclides. The program is described with emphasis on food analysis and quality control, including independent interlaboratory exercises. Analytical results are summarized for Cd, Pb, Ni, As, Hg, Se, Cu, Zn, Mn, Fe, Mg, Ca, P, K, and Na and for 137Cs, 131I, 106Ru, and 90Sr. Concentration data are provided to expand the information base used to support assessments of the safety and nutritive value of the U.S. food supply and for their potential use in food composition databases. For selected foods, comparisons were made with past TDS results and with those reported in the literature. An extensive listing of the analytical data is available on the FDA CFSAN Website.     

An arc cover–path-cover formulation and strategic analysis of alternative-fuel station locations

In this study, we present a new formulation of the generalized flow-refueling location model that takes vehicle range and trips between origin–destination pairs into account. The new formulation, based on covering the arcs that comprise each path, is more computationally efficient than previous formulations or heuristics. Next, we use the new formulation to provide managerial insights for some key concerns of the industry, such as: whether infrastructure deployment should focus on locating clusters of facilities serving independent regions or connecting these regions by network of facilities; what is the impact of uncertainty in the origin–destination demand forecast; whether station locations will remain optimal as higher-range vehicles are introduced; and whether infrastructure developers should be willing to pay more for stations at higher-cost intersections. Experiments with real and random data sets are encouraging for the industry, as optimal locations tend to be robust under various conditions.