Development of 1-(2-pyridylazo)-2-naphthol-modified polymeric membranes for the effective batch pre-concentration and determination of zinc traces with flame atomic absorption spectrometry

The development of 1-(2-pyridylazo)-2-naphthol (PAN)-modified polymeric membranes for the effective batch pre-concentration and determination of zinc traces with flame atomic absorption spectrometry (FAAS) is described. The method is based on the chemical bonding of the metal species with a suitable ligand, which has been immobilized into a water-insoluble cellulose acetate (CA) membrane followed by simple rinsing of the chelating agent-metal complex with an acidified methanolic solution. The latter is directly aspirated to the nebulizer of a FAA spectrophotometer without any other treatment. As an analytical demonstration, trace concentrations of Zn(II) were successfully detected in real samples, such as seawater, river and lake water, wastewater as well as in a reference material, without any laborious and time-consuming treatment. Several working parameters were investigated. A pre-concentration factor of 100 was achieved by simple immersing of a circular piece of the CA-PAN membrane (0.6 cm diameter) in the tested samples for 30 min at room temperature. The analytical curve was rectilinear up to 30 mug l(-1) zinc with detection limit of 0.7 mug l(-1), a quantitation limit of 2.0 mug l(-1) and a relative standard deviation lower than 2%.     

Gas chromatographic determination of 2-hydroxy-4-methoxybenzophenone and octyldimethyl-p-aminobenzoic acid sunscreen agents in swimming pool and bathing waters by solid-phase microextraction

A method has been developed for the trace determination of two sunscreen constituents (2-hydroxy-4-methoxybenzophenone and octyldimethyl-p-aminobenzoic acid) in water samples, which are commonly used in commercial formulations. The method employs solid-phase microextraction (SPME) and gas chromatography with flame ionization and mass spectrometric detection. The technique was developed with headspace and direct sampling in order to demonstrate the applicability of these SPME extraction modes for the identification of these two UV absorbing compounds in waters. The main parameters affecting the SPME process, such as desorption time, extraction time profile, salt additives, pH, and temperature, were investigated. The poly(dimethylsiloxane) 100-microm and polyacrylate 85-microm fiber coatings were found to be the most efficient for the extraction of these compounds from aqueous matrices. Linear calibration curves in the wide range of 10-500 microg/l were obtained for both compounds yielding typical RSD values of 5-9% for both extraction modes. The recoveries were relatively high, 82-98%, with quantitation limits below 1 microg/l. A comparison between the proposed methods and the conventional multiresidue solid-phase extraction revealed that the proposed technique(s) can be reliably used for sunscreen residue measurement in water samples with satisfactory results.     

Determination of phenolic compounds using spectral and color transitions of rhodium nanoparticles

This work reports a new approach for the determination of phenolic compounds based on their interaction with citrate-capped rhodium nanoparticles. Phenolic compounds (i.e., catechins, gallates, cinnamates, and dihydroxybenzoic acids) were found to cause changes in the size and localized surface plasmon resonance of rhodium nanoparticles, and therefore, give rise to analyte-specific spectral and color transitions in the rhodium nanoparticle suspensions. Upon reaction with phenolic compounds (mainly dithydroxybenzoate derivatives, and trihydroxybenzoate derivatives), new absorbance peaks at 350 nm and 450 nm were observed. Upon reaction with trihydroxybenzoate derivatives, however, an additional absorbance peak at 580 nm was observed facilitating the speciation of phenolic compounds in the sample. Both absorbance peaks at 450 nm and 580 nm increased with increasing concentration of phenolic compounds over a linear range of 0–500 μM. Detection limits at the mid-micromolar levels were achieved, depending on the phenolic compound involved, and with satisfactory reproducibility (<7.3%). On the basis of these findings, two rhodium nanoparticles-based assays for the determination of the total phenolic content and total catechin content were developed and applied in tea samples. The obtained results correlated favorably with commonly used methods (i.e., Folin-Ciocalteu and aluminum complexation assay). Not the least, the finding that rhodium nanoparticles can react with analytes and exhibit unique localized surface plasmon resonance bands in the visible region, can open new opportunities for developing new optical and sensing analytical applications.     

Book Reviews

Glossary On Air Pollution, Who Regional Publications European Series No. 9 (Director, Promotion of Environmental Health, WHO Regional Office for Europe, Scherfigsvej 8, DK-2100 Copenhagen θ) 1980, 114 pages (including an introduction, a list of reviewers and a list of the sources of definitions), stiff paper cover, format 239 ± 159 mm, ISBN 92-9020-109-6, WHO Health and Biomedical Information Programme, CH-1211 Geneva 27, SFr. 12.

Spektroskopische Methoden in Der Organischen Chemie (in German), by Manfred Hesse, Herbert Meier and Bernd Zeeh, 478 pages, including 169 figures and 86 tables, flexible paper cover, ISBN 3-13-576101-0, Georg Thieme Verlag, Stuttgart 1979, price DM 26.80.

Analysis of Polycyclic Aromatic Hydrocarbons in Environmental Samples, World Health Organisation/International Agency for Research on Cancer, IARC Publication No. 29 (Series: Environmental Carcinogens, Selected Methods of Analysis, Volume 3, edited by H. Egan, Laboratory of the Government Chemist, London, U.K. et al.) 1980, 240 pages (including 17 figures, 18 tables, many formulae, an annex with 8 methods of analysis and 29 pages of valuable references in two sections), linen, format 242 ± 186 mm, ISBN 92-8-321129-4, WHO Health and Biomedical Information Programme, CH-1211 Geneva 27, US$30 or SFr. 50.

Toxic Metals and Their Analysis by Eleanor Berman, Cook County Hospital, Chicago, Illinois, U.S.A., 304 pages (including an index of 5 pages, 29 tables and 5 figures), linen, format 241 × 163 mm, ISBN 0-85501-468-7, published 1980 by Heyden International Topics in Science, Spectrum House, Hillview Gardens, London NW4 2JQ, U.K., prices £12, US$27 or DM 56.     

Differential inhibition of postnatal brain,spinal cord and body growth by a growth hormone antagonist

Background  

Growth hormone (GH) plays an incompletely understood role in the development of the central nervous system (CNS). In this study, we use transgenic mice expressing a growth hormone antagonist (GHA) to explore the role of GH in regulating postnatal brain, spinal cord and body growth into adulthood. The GHA transgene encodes a protein that inhibits the binding of GH to its receptor, specifically antagonizing the trophic effects of endogenous GH.     

Design of a field flow system for the on-line spectrophotometric determination of phosphate, nitrite and nitrate in natural water and wastewater

This study describes the design and optimisation of a field flow system for the in-situ collection and on-line determination of phosphate, nitrate and nitrite by flow injection analysis-spectrophotometry. The method is based on the initial determination of phosphate as its phosphoantimonylmolybdenum blue complex which is then oxidized on-line by nitrite and the decrease in absorbance is monitored at 880 nm. Nitrate is determined as the difference between total and initial nitrite content in a separate flow after reduction to nitrite in a cadmium reductive column. The calibration curves were linear in the range 0–2.00 mg L⁻¹ P-phosphate, 0–10.00 mg L⁻¹ nitrite and 0–7.00 mg L⁻¹ nitrate with correlation coefficients of 0.9979, 0.9993 and 0.9995, respectively. The detection limits, calculated as 3S/N, were 0.15 mg L⁻¹ for P-phosphate, 0.17 mg L⁻¹ for nitrite and 0.09 mg L⁻¹ for nitrate. The reproducibility was below 3.0% (n = 7). Method validation in the analysis of natural water and wastewater samples revealed that it can efficiently be applied to the determination of the target analytes, with recoveries in the range of 92–108%. Correspondence: Athanasios G. Vlessidis, Laboratory of Analytical Chemistry, Department of Chemistry, University of Ioannina, Ioannina 45110, Greece     

Transfer measurements for the Ti+Ni systems at near barrier energies

Large enhancements have been observed in the sub-barrier fusion cross sections for Ti+Ni systems in our previous studies. Coupled channel calculations incorporating couplings to 2⁺ and 3⁻ states failed to explain these enhancements completely. A possibilty of transfer channels contributing to the residual enhancements had been suggested. In order to investigate the role of relevant transfer channels, measurements of one- and two-nucleon transfer were carried out for ^46,48Ti+⁶¹Ni systems. The present paper gives the results of these studies.     

Concentration of organic compounds in natural waters with solid-phase dispersion based on advesicle modified silica prior to liquid chromatography

The ability of vesicle-coated silica to aid the extraction of organic compounds from water prior to liquid chromatographic analysis is presented for the first time. The method is based on the formation of silica supported cationic multi-lamellar vesicles of gemini surfactants inherently ensuring the presence of hydrophilic and hydrophobic sites for the partitioning of analytes bearing different properties. Method development is illustrated by studying the adsolubilization of UV absorbing chemicals from swimming pool water. Due to the requirement for external energy input (intense shearing) a method based on solid-phase dispersion (SPD) was applied producing better results than off-line solid-phase extraction (SPE). Meticulous investigation of the experimental parameters was conducted in order to elucidate the mechanisms behind the proposed extraction pattern. Analyte recoveries were quantitative under the optimum experimental conditions offering recoveries higher than 96% with RSD values below 5%.     

Micelle mediated extraction of magnesium from water samples with trizma-chloranilate and determination by flame atomic absorption spectrometry

This article describes an analytical method for the determination of magnesium taking advantage of the cloud point phenomenon employing a suitable chelating agent (chloranilate) for Mg analysis. The method encompasses pre-concentration of the metal chelate followed by flame atomic absorption spectrometry (FAAS) analysis. The chelating agent chosen for this task is a newly synthesised salt of chloranilic acid, trizma-chloranilate, which reacts with Mg but at the same time has a very low affinity for other metallic cations like silicon, aluminium and sodium, which interfere with the determination of Mg in FAAS. The condensed surfactant phase with the metal chelate(s) is introduced into the flame of an atomic absorption spectrometer after its treatment with an acidified methanolic solution. In this way, complex and time-consuming steps for sample treatment are avoided while increased sensitivity is achieved by the presence of both methanol and surfactant in the aspirated sample. The analytical curve was rectilinear in the range of 5-220 mugl(-1) and the limit of detection was as low as 0.75 mugl(-1) with a standard deviation of 5.2%. The method was applied for the determination of Mg in natural and mineral waters with satisfactory results and recoveries in the range of 97-102%.     

Application of a novel chemometric approach to the determination of aqueous photolysis rates of organic compounds in natural waters

The utility of multivariate optimization methods in the determination of aqueous photolysis rates of organic compounds is examined in this study. A basic pursue was to designate the appropriate experimental design plan that extend the analytical utility of multivariate methods from qualitative data interpretation approaches, as applied thus far, to quantitative estimation methods. A three-level second-order central composite design with parameter concentrations (factor levels) beyond the environmental realistic concentrations was employed for that purpose enabling statistically significant effects to be determined. Method application is demonstrated in the first photodegradation study of two UV absorbing chemicals in natural waters. The results suggest that the proposed approach of enables a good approximation of the real behavior in terms of both qualitative and quantitative data interpretation with minimal loss of information.