Preparative isolation of (+)-beta-eudesmol fromAmyris balsamifera

Summary Optically pure (+)-beta-eudesmol is a possible starting material for the synthesis of several termite defense compounds. A two step procedure for the isolation of gram quantities of (+)-beta-eudesmol from commercially availableAmyris balsamifera oil (syn. West Indian sandalwood oil), containing 8% beta-eudesmol, was developed. Step one consisted of an efficient vacuum distillation of the total oil. Step two was a medium pressure LC separation with an AgNO₃ impregnated silica gel stationary phase. Several other separation procedures failed due to the presence of many closely related sesquiterpene alcohols (75% of the oil).     

Variation of surface properties and textural features of spinel ZnAl2O4 and perovskite LaMnO3 nanoparticles prepared via CTAB-butanol-octane-nitrate salt microemulsions in the reverse and bicontinuous states

Two binary oxides, a spinel, ZnAl2O4, and a typical perovskite, LaMnO3, have been prepared via CTAB-1-butanol-n-octane-nitrate salt microemulsion in the reverse and bicontinuous states. The exact point of the reverse and bicontinuous states of the microemulsion used in the synthesis was determined by conductivity experiments. The materials obtained after heating at 800 degrees C were characterized by XRD analysis for their crystal structure, N2 porosimetry for their surface area and porosity, and SEM and TEM photography for their texture. The ZnAl2O4 spinel obtained via the reverse microemulsion appears in SEM in a more fragmented form and with a higher specific surface area (143.7 m(2)g(-1)), compared to the corresponding solid prepared via the bicontinuous microemulsion, which appears more robust with lower surface area (126.7 m(2)g(-1)). Nevertheless both materials reveal in TEM a sponge-like structure. The perovskite materials LaMnO3 prepared via the reverse microemulsion showed in SEM a peculiar doughnut-like texture, each doughnut-like secondary particle having a diameter of 2 microm. The corresponding sample developed via the bicontinuous microemulsion showed in SEM uniform secondary particles of size approximately 0.2 microm. Both perovskite samples LaMnO3 appear well crystallized with relative low surface areas, 23.7 m(2)g(-1) for the reverse sample and 10.9 m(2)g(-1) for the bicontinuous one. The TEM photographs reveal that both of them, of reversed and bicontinuous origin, are made up of primary nanoparticles in the size range 40-100 nm. In SEM those materials showed a different secondary structure.     

Synthesis of a Novel Chitosan/Basil Oil Blend and Development of Novel Low Density Poly Ethylene/Chitosan/Basil Oil Active Packaging Films Following a Melt-Extrusion Process for Enhancing Chicken Breast Fillets Shelf-Life

An innovative process for the adsorption of the hydrophobic Basil-Oil (BO) into the hydrophilic food byproduct chitosan (CS) and the development of an advanced low-density polyethylene/chitosan/basil-oil (LDPE/CS_BO) active packaging film was investigated in this work. The idea of this study was the use of the BO as both a bioactive agent and a compatibilizer. The CS was modified to a CS_BO hydrophobic blend via a green evaporation/adsorption process. This blend was incorporated directly in the LDPE to produce films with advanced properties. All the obtained composite films exhibited improved packaging properties. The film with 10% CS_BO content exhibited the best packaging properties, i.e., 33.0% higher tensile stress, 31.0% higher water barrier, 54.3% higher oxygen barrier, and 12.3% higher antioxidant activity values compared to the corresponding values of the LDPE films. The lipid oxidation values of chicken breast fillets which were packaged under vacuum using this film were measured after seven and after fourteen days of storage. These values were found to be lower by around 41% and 45%, respectively, compared with the corresponding lipid oxidation values of pure LDPE film.     

Surface properties, textural features and catalytic performance for NO + CO abatement of spinels MAl2O4 (M = Mg, Co and Zn) developed by reverse and bicontinuous microemulsion method

Three typical spinels of general formula MAl₂O₄ (M = Mg, Co and Zn) have been successfully prepared via a microemulsion method both in the reverse and bicontinuous state. The final solids were characterized by X-ray diffraction followed by Rietveld analysis, N₂ adsorption-desorption porosimetry and SEM. Pore connectivity (c) was also calculated with Seaton's method. The analysis of all these properties shown that spinels prepared via reverse microemulsion route have better surface and textural properties than bicontinuous ones. The spinels were tested for NO + CO reaction and reverse spinels shown better catalytic activity than bicontinuous ones while the full sequence of catalytic activity is: ZnAl₂O₄-r > ZnAl₂O₄-b > MgAl₂O₄-r > MgAl₂O₄-b > CoAl₂O₄-r > CoAl₂O₄-b. The Rietveld analysis helped us to give an explanation about the catalytic activity and shown that the configuration of inverse spinel phase is the critical factor for the catalytic behavior of final solids. The reactants NO and CO react in a 2:1 ratio at low temperature but they convert in a 1:1 ratio at high temperatures. From the kinetic analysis the heats of NO adsorption are estimated and are in full agreement with the results of catalytic activity.     

Effect of composition on the conductivity of CTAB-butanol-octane-nitrate salts (Al(NO3)3 + Zn(NO3)2) microemulsions and on the surface and textural properties of resulting spinels ZnAl2O4

The conductivity σ of a microemulsion series consisting of CTAB + butanol + octane, in which a solution of Al(NO₃)₃ 0.8 M + Zn(NO₃)₂ 0.4 M was gradually added, was studied at room temperature as a function of its composition φ. The addition of nitrate salts solution took place in four different ratios of (butanol + CTAB):octane = 0.2, 0.4, 0.6 and 0.8. Initially, all those four systems are (water in oil, w/o) microemulsions and the gradual addition of the solution of the nitrate salts transforms them to bicontinuous ones. The conductivity increases gradually, but with different rate in each case, and the corresponding critical exponents at the percolation threshold were determined from the curves σ = f(φ). Next at three different compositions of microemulsions, corresponding to ratios (butanol + CTAB):octane = 0.4, 0.6 and 0.8 and ratio of the nitrate salts solution x ≈ 0.25, spinels ZnAl₂O₄ were isolated/prepared. XRD, SEM and N₂ adsorption-desorption measurements were used to determine the structure and texture of those solids. From those measurements the surface area (S_p), the pore volume (V_p), the size of crystallites and the average pore connectivity (c) were found. Those properties showed considerable variation and dependence on the composition of the original microemulsions employed in the preparation, a fact indicating that the structure and texture of the obtained solids can be manipulated at will via the composition of microemulsion used.     

Photocatalytic degradation of organophosphate flame retardant TBEP: kinetics and identification of transformation products by orbitrap mass spectrometry

The photocatalytic degradation of tris (2–butoxyethyl) phosphate (TBEP) flame retardant using visible light response catalysts TiO₂/V₂O₅, (N,F-doped)-TiO₂/V₂O₅, and N-doped-SrTiO₃ has been studied by high-resolution orbitrap mass spectrometry. TBEP degradation followed first-order kinetics with half-life values ranging between 9.8 and 83.5 min. N-doped-SrTiO₃ was the catalyst with better photocatalytic performance while activity for TiO₂/V₂O₅ composites followed the trend: N, F- TiO₂/V₂O₅ > N-TiO₂/V₂O₅> TiO₂/V₂O₅. The identified degradation products (DPs) revealed hydroxylation, further oxidation and dealkylation as major degradation pathways. Based on the identified DPs and scavenging experiments, ^?OH radical-mediated reactions can be considered for the degradation of TBEP using TiO₂ and SrTiO₃-based photocatalytic materials.     

Adsorption of Cr(VI) from aqueous solutions by HNO3-purified and chemically activated pyrolytic tire char

Pyrolytic tire char adsorbents either demineralized by nitric acid (purified char, PC) or activated with KOH-calcination (activated char, AC) were used for Cr(VI) removal from aquatic solutions and studied by adsorption kinetics, isotherms, and thermodynamics. Adsorbent’s physicochemical characteristics were studied by several techniques such as X-ray diffraction, porosimetry, scanning electron microscopy, elemental analysis, and Boehm titration. For PC, acid treatment leads partially to a mesoporous structure while for AC, KOH activation creates also a microporosity enhancing the specific surface area at 443 m²g^?1. Cr(VI) adsorption onto both adsorbents followed better second-order kinetics and Langmuir isotherm models and it was exothermic (ΔH < 0) and spontaneous (ΔG < 0). The maximum Cr(VI) adsorption capacity for AC and PC was 114 and 79.47 mg g^?1, respectively, at pH = 4. The present work reveals that AC and PC can be efficient sorbents for the removal of heavy metal ions, contributing both positively to wastewater treatment and waste tire pyrolysis plants.     

Investigations into beam monitors at the AEg ̄ IS experiment

Detailed diagnostic of antiproton beams at low energies is required for essentially all experiments at the Antiproton Decelerator (AD), but will be particularly important for the future Extra Low ENergy Antiproton ring (ELENA) and its keV beam lines to the different experiments. Many monitors have been successfully developed and operated at the AD, but in particular beam profile monitoring remains a challenge. A dedicated beam instrumentation and detector test stand has recently been setup at the AE \(\bar {g}\) IS experiment (Antimatter Experiment: Gravity, Interferometry, Spectroscopy). Located behind the actual experiment, it allows for parasitic use of the antiproton beam at different energies for testing and calibration. With the aim to explore and validate different candidate technologies for future low energy beam lines, as well as the downstream antihydrogen detector in AE \(\bar {g}\) IS, measurements have been carried out using Silicon strip and pixel detectors, a purpose-built secondary emission monitor and emulsions. Here, results from measurements and characterization of the different detector types with regard to their future use at the AD complex are presented.