Sorption characteristics of uranium onto composite ion exchangers

The composite ion exchangers were tested for their ability to remove UO₂ ²⁺ from aqueous solutions. Polyacrylonitrile (PAN) composites having natural zeolite, clinoptilolite, and synthetic zeolite, zeolite X, were used as an adsorbents. The influences of pH, U(VI) concentration, temperature and contact time on the sorption behavior of U(VI) were investigated in order to gain a macroscopic understanding of the sorption mechanism. The optimum adsorption conditions were determined for two composites. The sorption behaviors of uranium on both composites from aqueous systems have been studied by batch technique. Parameters on desorption were also investigated to recover the adsorbed uranium.     

Impact of biological factors on binding media identification in art objects: identification of animal glue in the presence of Aspergillus niger

The materials and especially organic materials used for creation of art objects can be utilized by various microorganisms for their growth and facilitate the microbial colonization of the object. An understanding of the chemical alterations in artefacts caused by the presence of microorganisms can be crucial for correct identification of the materials initially used for the artefact creation--nowadays an important step in restoration and/or art-historical investigation of the art object. The present article describes a model experiment in which we investigated the possible chemical alterations in animal glue films used as substrate for growth of the fungus Aspergillus niger. The sterilized animal glue solution was poured into Petri dishes, inoculated with Aspergillus niger, and subsequently incubated at 15 degrees C for 0, 7, 9, 14, and 28 days. After interruption of incubation, the content of the Petri dish was analyzed for amino acid composition by the GC-MS based method. It was found that the growth of Aspergillus niger on animal glue films did not cause significant changes in the amino acid composition of the film and had no impact on animal glue identification.     

A novel heterogeneous nanocatalyst: 2‐Methoxy‐1‐phenylethanone functionalized MCM‐41 supported Cu(II) complex for C‐S coupling of aryl halides with thiourea

An environmentally friendly copper‐based catalyst supported on 2‐Methoxy‐1‐phenylethanone functionalized MCM‐41 was prepared and characterized by FT‐IR, FE‐SEM, TEM, XRD, EDX, BET and ICP techniques. The catalyst was applied for the C?S cross‐coupling reaction of aryl halides with thiourea. Corresponding products were produced in good yields in aerobic conditions. The catalyst could be recovered and recycled for several times.     

Design and optimization of high-performance microring-based uni-traveling carrier photodiode for WDM optical systems

This paper presents the design principles of a novel optimized microring-based uni-traveling carrier photodiode (MR-UTC-PD), for wavelength division multiplexing (WDM) optical systems. The fundamental parameters for output characteristics such as quantum efficiency and 3-dB bandwidth of MR-UTC-PD are discussed. We analyze the effects of basic parameters as effective ring radius, definite coupling condition and the suitable cross section on the MR-UTC-PD main characteristics for high performance of the device. It is shown that the maximum quantum efficiency and most efficient performance of the device can be obtained at critical coupling condition. We show that the maximum 3-dB bandwidth and an efficient approach for high bandwidth-efficiency product can be achieved at overcoupling condition. In this regard, some design curves are presented for the optimized MR-UTC-PD.     

Enantioselective Diethylzinc Addition to Aromatic Aldehydes Catalyzed by Novel Ti(IV) Complex of Three-Dentate Chiral Sulfonamide Ligands

The synthesis of several novel three-dentate sulfonamide alcohol ligands is described, starting from camphorsulfonyl chloride. The influence of temperature and ligand structure on the asymmetric addition of dietylzinc to aromatic aldehydes has been studied. Enantioselectivities up to 76% have been obtained.     

Adsorption of Cu(II) and Zn(II) ions from aqueous solutions onto fine powder of Typha latifolia L. root: kinetics and isotherm studies

Fine powder of Typha latifolia L. root was used for adsorption of copper and zinc ions from buffered and nonbuffered aqueous solutions. The adsorption reached equilibrium in 60 min. During this time, more than 90 % of the adsorption process was completed. The effect of initial pH, initial concentration of metal ion, and contact time was investigated in a batch system at room temperature. The optimum adsorption performance was observed at pH 5.00 and 4.25 for nonbuffered solutions of Cu(II) and Zn(II), respectively, while for buffered solutions it occurred at pH 6.00. The total metal uptake decreased on application of ammonium acetate buffer, from 37.35 to 17.00 mg g^?1 and 28.80 to 9.90 mg g^?1 for Cu(II) and Zn(II) solutions, respectively, with 100 mg L^?1 initial concentration. The pseudo-first-order, pseudo-second-order, intraparticle diffusion, and Elovich models were used to describe the adsorption kinetics. The experimental data followed the pseudo-second-order kinetic model. The biosorption equilibrium was well described by Langmuir and Freundlich isotherm models.     

Spatial distribution and risk assessment of radioactivity and heavy metal levels of sediment,surface water and fish samples from Lake Van,Turkey

In this study, radioactivity levels of 228 lake water samples, 63 upper and depth sediment samples and 12 fish samples from Lake Van were investigated from 2005 to 2008 and the distribution patterns of the radionuclides were presented. Analysis included gross alpha–beta and total radium isotopes activities and uranium concentrations of the water, and gross alpha and gross beta activities and relevant ²³⁸U, ²³²Th and ⁴⁰K activity of the sediment and fish samples of the lake. Mean gross alpha, gross beta and radium isotopes activities of lake water were found 0.74 ± 0.46, 0.02 ± 0.01 and 0.06 ± 0.04 Bq/L, respectively. Mean gross alpha and beta activities in upper and depth sediments were found to be 41 ± 6 and 1,514 ± 74 Bq/kg; 77 ± 5 and 394 ± 24 Bq/kg at a 95 % confidence level, respectively. Mean activities of ²³⁸U, ²³²Th and ⁴⁰K activity concentrations in upper and depth sediments were determined to be 225 ± 22, 70 ± 7 and 486 ± 39 Bq/kg; 174 ± 4, 63 ± 3 and 263 ± 25 Bq/kg, respectively. The mean gross alpha and beta, ²³⁸U, ²³²Th and ⁴⁰K aktivities in fish samples were established as 47 ± 18, 470 ± 12, 0.57 ± 0.220, 0.022 ± 0.006, 319 ± 11 Bq/kg, respectively. The transfer factor from lake water to fish tissues, annual intake by humans consuming fish, and annual committed effective doses were estimated and evaluated.     

Preparation of ethylene/α-olefins copolymers using (2-RInd)2ZrCl2/MCM-41 (R:Ph,H) catalyst,microstructural study

(2-RInd)₂ZrCl₂ (R:Ph,H) catalyst was supported on MCM-41 and ethylene copolymerization behavior as well as microstructure of copolymers were studied. A steady rate–time profile behavior was observed for homo and copolymerization of ethylene using supported catalysts. It was noticed that increasing the comonomer content can result in lower physical properties. The obtained results indicated that (2-PhInd)₂ZrCl₂/MCM-41 had higher ability of comonomer incorporation than the non-substituted supported catalysts. The CCC, CCE, and ECC (C: comonomer, E: ethylene) triad sequence distribution in backbone of copolymers were negligible, that means no evidence could be detected for comonomer blocks. The polymer characterization revealed that utilizing 1-octene instead of 1-hexene as the comonomer leads to more heterogeneous distribution of chemical composition. The heterogeneity of the chemical composition distribution and the physical properties were influenced by the type of comonomer and catalyst. (2-PhInd)₂ZrCl₂/MCM-41 produced copolymers containing narrower distribution of lamellae (0.3–1 nm) than the copolymer produce using Ind₂ZrCl₂/MCM-41 (0.3–1.6 nm).