Spectrophotometric and AAS determination of trace amounts of cobalt after preconcentration by using alpha-benzilmonoxime-microcrystalline naphthalene.

The formed cobalt-a-benzilmonoxime complex was adsorbed onto microcrystalline naphthalene. Then it was determined by zero and first derivative spectrophotometry and by atomic absorption spectrophotometry (AAS) after dissolving into chloroform and methylisobutylketone (MIBK), respectively. Under optimum conditions, cobalt in the range of 1.0 - 20.0, 0.4 - 30.0 and 2.5 - 50.0 microg could be determined by spectrophotometry, first derivative spectrophotometry and AAS method, respectively. By the method, a preconcentration factor equal to approximately 30 for cobalt was obtained. The effect of diverse ions on the determination of 5.0 microg cobalt was also studied. The method was successfully applied to some pharmaceuticals and synthetic alloy samples.     

Simultaneous determination of cobalt, nickel and palladium in micellar media using partial least square regression and direct orthogonal signal correction

A simple, novel and sensitive spectrophotometric method was described for the simultaneous determination of cobalt, nickel and palladium. The method is based on the complex formation of Co, Ni and Pd with 1-(2-pyridylazo)-2-naphtol (PAN) in Tween-80 micellar media. All factors affecting on the sensitivity were optimized and the linear dynamic range for determination of Co, Ni and Pd was found. The experimental calibration matrix was designed by measuring the absorbance over the range of 520-700 nm for 21 samples of 0.10-1.0, 0.050-0.50 and 0.050-4.0 microg ml(-1) of Co, Ni and Pd, respectively. The partial least square (PLS) modeling based on singular value decomposition (SVD) was used for the multivariate calibration of the spectrophotometric data. The direct orthogonal signal correction was used for pre-processing of data matrices and the prediction results of model, with and without using direct orthogonal signal correction, were statistically compared. The effects of various anions and cations on selectivity of the method were investigated. The proposed method was successfully applied to the determination of Co, Ni and Pd in water and alloy samples.     

The inverse maximum dynamic flow problem

We consider the inverse maximum dynamic flow (IMDF) problem. IMDF problem can be described as: how to change the capacity vector of a dynamic network as little as possible so that a given feasible dynamic flow becomes a maximum dynamic flow. After discussing some characteristics of this problem, it is converted to a constrained minimum dynamic cut problem. Then an efficient algorithm which uses two maximum dynamic flow algorithms is proposed to solve the problem.     

Kinetic spectrophotometric method for the determination of trace amounts of oxalate by an activation effect.

A new, simple and inexpensive kinetic catalytic spectrophotometric method for the determination of oxalate is described. The method is based on an activation effect of oxalate on a catalytic effect of iron(II) on the oxidation of iodide by bromate. The reaction is monitored by measuring the absorbance of triiodide ion at lambda max = 352 nm. A calibration graph was obtained from 0.10 - 7.0 microg cm(-3) of oxalate with a detection limit of 0.080 microg cm(-3). The standard deviations for ten replicate determinations of 0.50, 1.0 and 5.0 microg cm(-3) of oxalate were 4.0, 2.6 and 1.8%, respectively. The applicability of the method was demonstrated by the determination of oxalate ion in real samples.     

Methylthiouracil‐modified Carbon Paste Electrode as a New Voltammetric Sensor Based on a 1,4‐Michael Addition Reaction for Detection of Dopamine

A sensitive dopamine sensor was constructed based on the modified carbon paste electrode with methylthiouracil as a nucleophile in the 1,4‐Michael addition reaction. An ECE mechanism was suggested for dopamine oxidation at the modified electrode. Design of experiments was used in the optimization of variables. Under the optimum conditions, calibration graph was linear in the range of 0.20–15.0 µM with a detection limit of 73 nM. The relative standard deviations (n=5) for 0.50 µM of dopamine was 3.83 %. The selectivity of the sensor was also studied. The developed sensor was applied for analysis of pharmaceutical and biological samples.     

Ultra-trace analysis of nitrite in food samples by flow injection with spectrophotometric detection

A flow injection system with spectrophotometric detection is proposed for the determination of low levels of nitrite based on its catalytic effect on the oxidation of gallocyanine by bromate in acidic media. Various analytical parameters such as acidity, reagent concentration, flow rate, sample size, time, temperature, and interfering species were studied. The calibration graph was linear for 0.020–0.500 μg/mL of nitrite. The method is successfully applied to food samples. Up to 30 ± 5 samples can be analyzed per hour. Received: 8 April 1998 / Revised: 3 June 1998 / Accepted: 31 July 1998     

Ultra-trace analysis of nitrite in food samples by flow injection with spectrophotometric detection

A flow injection system with spectrophotometric detection is proposed for the determination of low levels of nitrite based on its catalytic effect on the oxidation of gallocyanine by bromate in acidic media. Various analytical parameters such as acidity, reagent concentration, flow rate, sample size, time, temperature, and interfering species were studied. The calibration graph was linear for 0.020–0.500 μg/mL of nitrite. The method is successfully applied to food samples. Up to 30 ± 5 samples can be analyzed per hour. Received: 8 April 1998 / Revised: 3 June 1998 / Accepted: 31 July 1998     

H-Point Standard Addition Method for Simultaneous Determination of Palladium and Cobalt

The H-point standard addition method (HPSAM) has been applied to simultaneous determination of palladium and cobalt at trace levels, using 1-(2-pyridylazo)-2-naphthol (PAN) as a chromogenic reagent. Palladium and cobalt at neutral pH levels form green colored neutral complexes with PAN which are soluble in aqueous sodium dodecylsulfate (SDS) micellar media and can be monitored spectrophotometrically. Simultaneous determination of cobalt and palladium by HPSAM were performed spectrophotometrically and under optimum conditions. Absorbances at the two pairs of wavelengths, 597 and 650 nm or 566 and 612nm, were monitored while adding standard solutions of cobalt or palladium, respectively. The method is able to accurately determine a cobalt/palladium ratio of between 5:1 and 1:30 (wt/wt). The accuracy and reproducibility of the determination method for various known amounts of cobalt and palladium in their binary mixtures were evaluated. The effects of diverse ions on the determination of cobalt and palladium to investigate the selectivity of the method were also studied. The recommended procedure was applied to real water samples and synthetic sample solutions.     

Development of a Simple and Inexpensive Optical Absorption One‐Shot Sensor Membrane for Detection and Determination of Cyanide Ions in Water Samples

A new one‐shot optical cyanide ion sensor is proposed for determination of cyanide ions. The sensor was constructed by immobilizing crystal violet (CV) on triacetylcellulose membrane. The sensing mechanism involves reaction between cyanide ions and the immobilized CV at pH = 5.4, which results in a decrease in absorbance of the membrane at 600 nm. The sensor shows sufficient repeatability, reproducibility, operational lifetime of 3 weeks, and a response of less then 10 min under the optimum conditions and response time of 8 min. Cyanide can be determined in the concentration range of 50.0‐800 μg mL^‐1 with a detection limit of 5.0 μg mL^‐1. Most ions do not interfere with the determination of cyanide ions. The proposed sensor was successfully applied to the determination of cyanide in spiked water samples.     

Application of multiwalled carbon nanotubes for the preconcentration and determination of organochlorine pesticides in water samples by gas chromatography with mass spectrometry

A fast, sensitive, and convenient technique consisting of a miniaturized solid‐phase extraction method named microextraction in packed syringe coupled with gas chromatography and mass spectrometry was developed for the preconcentration and determination of some pesticides, including hexachlorobenzene, heptachlor, alachlor, aldrine, and metolachlore, in natural water samples. Carboxyl‐purified multiwalled carbon nanotubes were used as a sorbent in microextraction in packed syringe. Based on this technique, 6.0 mg of multiwalled carbon nanotubes was inserted in the syringe between two polypropylene frits. The analytes would be adsorbed on the solid phase, and would subsequently be eluted using organic solvents. The influence of some important parameters involved including the solution pH, type, and volume of the organic desorption solvent, and amount of the multiwalled carbon nanotubes sorbent on the extraction efficiency of the selected pesticides were investigated. The proposed method showed a good linearity in the range of 0.1–25.0 ng/mL and low limits of detection in the range of 0.02–0.19 ng/mL using the selected ion‐monitoring mode. Reproducibility of the method was in the range of 3.3–8.5% for the studied pesticides. Also to evaluate the matrix effect, the developed method was applied to the preconcentration and determination of the selected pesticides in different water samples.