Effect of the addition of a nonionic surfactant on the complex poly(asparagine)--cationic surfactant

Poly(asparagine) (pAsn) at 0.1wt % in the presence of dodecyltrimethylammonium bromide (DTAB) and pentaoxyethylene octyl ether (C(8)E(5)) at 1:1 molar ratio leads to the formation of mixed DTAB/C(8)E(5) micelle-like aggregates onto the polypeptide as a total surfactant critical association concentration (cac) is reached, as revealed by surface tension measurements and NMR chemical shifts. Two-dimensional nuclear Overhauser enhancement spectroscopy (NOESY) capable of revealing spatial relationships among proximal protons has been performed on the pAsn-DTAB-C(8)E(5)-water system to study structural details of the surfactant-polypeptide aggregates. NOESY cross-peaks at sample temperature of 298.15 K indicate that the polypeptide interacts with the DTAB/C(8)E(5) micelle-like aggregates. The NOE intermolecular effects also show direct interactions between surfactant and polypeptide in the pAsn-DTAB-water system, whereas no interaction has been revealed in the pAsn-C(8)E(5)-water system. Furthermore, the experimental evidence suggest that the DTAB-polypeptide complex is mainly driven by the polar attraction between the two molecules.     

Thermodynamic and Dynamic Properties of Micellar Aggregates of Nonionic Surfactants with Short Hydrophobic Tails

The densities and viscosities of binary aqueous mixtures of poly(ethylenoxide)hexanols [C₆H₁₃(OCH₂CH₂)_mOH, C₆E_m] (m= 3, 4, and 5) have been studied in the micellar composition range. For the same surfactants the self-diffusion coefficients in mixtures with heavy water have been determined by the spin-echo pulsed field gradient method. The volumetric data are interpreted by means of the phase separation model, and values of the CMC, volume change, and standard free energy change of micellization are obtained. From the viscosity data the hydration numbers of the surfactant hydrophilic head in the micellar state are computed; they are in agreement with those obtained from HDO self-diffusion data. The surfactant self-diffusion data are used to calculate the apparent micelle radius and the aggregation number. The micellization parameters obtained for the different surfactants are compared and discussed.     

Mixed micellar aggregates of nonionic and anionic surfactants with short hydrophobic tails: a microcalorimetric study

Apparent molar relative enthalpies were measured for the nonionic ethoxylated surfactant CH(3)-(CH(2))(5)-(OCH(2)-CH(2))(5)OH (C(6)E(5)) in aqueous solution at constant molality of the ionic surfactant CH(3)-(CH(2))(5)-SO(-)(3)Na(+)(C(6)SNa) at 25 degrees C. The experimental data obtained by a stepwise dilution process allowed evaluation of the C(6)E(5) first interaction parameter at several constant molalities of C(6)SNa. The C(6)E(5) critical micelle composition as a function of the C(6)SNa molality was also estimated. The experimental calorimetric data, together with the mixed micelles composition computed in the past by some of us [Ciccarelli et al., Langmuir 14, 7130 (1998)], allowed computation of the Deltah(Mic) of micellization. The experimental data are compared to those predicted by the ideal solution model and regular solution model of mixed micellization. From a calorimetric study performed on the water-hexanol-C(6)SNa and water-penthaethylene glycol-C(6)SNa model systems, it can be argued that the interactions among the hydrophilic heads in the C(6)E(5)-C(6)SNa mixed micelles prevail on the contribution of the hydrophobic tails in ruling the enthalpic properties of the system.     

Effect of glycerol on micelle formation by ionic and nonionic surfactants at 25 degrees C

The effect of glycerol on the micellization of the cationic surfactant cetyltrimethylammonium bromide (CTAB) and of the ethoxylated nonionic surfactant Brij 58 has been investigated by various experimental techniques. For both surfactants the critical micellar concentration (cmc), determined by surface tension measurements, is almost unaffected by the presence of glycerol in the mixture; only at high glycerol concentrations (>/=20% w/w) does the cmc significantly increase. The area per surfactant molecule at the air-solution interface, A, increases with increasing glycerol weight percentage, w(g). Fluorescence quenching measurements indicate that the presence of glycerol induces a lowering of the aggregation number of both surfactants. The glycerol intradiffusion coefficient has been measured by the pulsed-gradient spin-echo NMR technique as a function of glycerol content at constant surfactant concentration. It is almost unaffected by the presence of the surfactants, indicating that no direct glycerol-surfactant interaction occurs in the mixture. The surfactant intradiffusion coefficient has been also measured. In the case of CTAB, it increases with increasing glycerol concentration, a reflection of the decreased aggregation number. For Brij 58, in spite of the lowering of the aggregation number, the surfactant intradiffusion coefficient decreases with increasing glycerol concentration, suggesting an increase of the intermicellar interaction. The experimental evidence shows that for both surfactants the micellization is affected by the presence of glycerol through an indirect, solvent-mediated mechanism. In the case of CTAB, the main effect of glycerol is a lowering of the medium dielectric constant, which enhances the electrostatic interactions in solution. In the case of Brij 58, the results can be interpreted in terms of a salting-out effect according to which glycerol competes with the surfactant for water molecules, causing a dehydration of the surfactant ethoxylic headgroup.     

Effects of Salts on the Micellization of a Short-Tailed Nonionic Ethoxylated Surfactant: An Intradiffusion Study

In commercial formulations, surfactants are often co-formulated with inorganic electrolytes, which are included as inexpensive thickeners. Salts affect the surfactant’s aggregative and functional behavior. However, while the electrolyte effect on the self-aggregation of ionic surfactants can be rationalized in terms of electrostatic interactions, in the case of nonionic surfactants the molecular determinants are still unclear. In this work, we investigate the effects of alkali and alkaline–earth metal chlorides on the micellization of the nonionic surfactant hexyl penta(oxyethylene) ether, C₆E₅, in aqueous solution. To this aim, the C₆E₅ intradiffusion (also named self-diffusion) coefficient in aqueous mixtures of various alkali and alkaline–earth metal chlorides was measured by pulsed gradient spin-echo NMR. The results show that all the considered electrolytes cause a decrease of the surfactant critical micellar concentration, cmc, while the micellar size is almost unaffected. The experimental evidence can be interpreted in terms of de-hydration of the apolar alkyl tails with a minor contribution arising from the dehydration of the poly(ethylene oxide) headgroups. The order of effectiveness of the different cations follows the Hofmeister series, some aspects of which are briefly discussed.     

On the segregative tendency of ethoxylated surfactants in nonionic mixed micelles

The aqueous mixtures of two nonionic surfactants, pentaethyleneglycol monohexyl ether (C(6)E(5)) and hexyl dimethyl phosphine oxide (C(6)DMPO), were investigated by the pulsed-gradient stimulated-echo NMR technique. Quite unexpectedly, the results show that the mixture behavior significantly deviates from ideality. Particularly, analysis of the data indicates that, in the mixed aggregates, C(6)E(5) molecules prefer to be surrounded by other C(6)E(5) molecules, forming domains of hydrated ethoxilic chains on the micellar surface. Molecular reasons for the segregative tendency of ethoxylated surfactants and its applicative implications in formulation technology are discussed.     

Clickable functionalization of liposomes with the gH625 peptide from Herpes simplex virus type I for intracellular drug delivery

Liposomes externally modified with the nineteen residues gH625 peptide, previously identified as a membrane‐perturbing domain in the gH glycoprotein of Herpes simplex virus type I, have been prepared in order to improve the intracellular uptake of an encapsulated drug. An easy and versatile synthetic strategy, based on click chemistry, has been used to bind, in a controlled way, several copies of the hydrophobic gH625 peptide on the external surface of 1,2‐dioleoyl‐sn‐glycero‐3‐phosphocholine (DOPG)‐based liposomes. Electron paramagnetic resonance studies, on liposomes derivatized with gH625 peptides, which are modified with the 2,2,6,6‐tetramethylpiperidine‐1‐oxyl‐4‐amino‐4‐carboxylic acid (TOAC) spin label in several peptide positions, confirm the positioning of the coupled peptides on the liposome external surface, whereas dynamic light scattering measurements indicate an increase of the diameter of the liposomes of approximately 30 % after peptide introduction. Liposomes have been loaded with the cytotoxic drug doxorubicin and their ability to penetrate inside cells has been evaluated by confocal microscopy experiments. Results suggest that liposomes functionalized with gH625 may act as promising intracellular targeting carriers for efficient delivery of drugs, such as chemotherapeutic agents, into tumor cells.     

Multiple micro mirrors for X-ray focusing and collimation

A novel route for fabrication of compact optical system for X-rays is presented. It is based on the extensive use of tools developed for microelectronics and micromechanics: electron beam lithography, optical lithography and X-ray lithography. Virtually any shape can be obtained in order to match the system to the different needs. In this paper, we concentrate the attention on focusing system made by nested mirrors. A system for synchrotron radiation source and one for laboratory source have been designed and simulated by a ray-tracing code developed ad hoc. The main parameters and the fabrication tolerance errors have been evaluated. The first prototypes have been produced following different fabrication routes. They are presented here together with considerations for future developments.     

Chemistry of Lipid A: At the Heart of Innate Immunity

In many Gram‐negative bacteria, lipopolysaccharide (LPS) and its lipid A moiety are pivotal for bacterial survival. Depending on its structure, lipid A carries the toxic properties of the LPS and acts as a potent elicitor of the host innate immune system via the Toll‐like receptor 4/myeloid differentiation factor 2 (TLR4/MD‐2) receptor complex. It often causes a wide variety of biological effects ranging from a remarkable enhancement of the resistance to the infection to an uncontrolled and massive immune response resulting in sepsis and septic shock. Since the bioactivity of lipid A is strongly influenced by its primary structure, a broad range of chemical syntheses of lipid A derivatives have made an enormous contribution to the characterization of lipid A bioactivity, providing novel pharmacological targets for the development of new biomedical therapies. Here, we describe and discuss the chemical aspects regarding lipid A and its role in innate immunity, from the (bio)synthesis, isolation and characterization to the molecular recognition at the atomic level.     

Complete wetting of curved microscopic channels

We have measured the adsorption of argon films on arrays of microscopic nonlinear cusps and of semicircular channels. In the former case, we observe a distinct crossover from a planarlike to a geometry dependent growth behavior near liquid-vapor bulk coexistence, characterized by a growth exponent chi equal to -0.96+/-0.04 in very good agreement with the predictions of a recent scaling theory [C. Rascon and A. O. Parry, J. Chem. Phys. 112, 5175 (2000)]. The crossover location is also consistent with theory. Instead, on the concave channels we find a much steeper growth near saturation that may signal the formation of two menisci at both sides of the channel bottom.