Phenomena Affecting the Equilibrium of Al(III) and Zn(II) Extraction with Winsor II Microemulsions

The extraction of Al(III) and Zn(II) from an aqueous solution with two water-in-oil microemulsions, one containing di(2-ethylhexyl)phosphoric acid (DEHPA), was investigated to aid the understanding of the role of the extractant and the metal specific characteristics in the mechanism of microemulsion extraction. The extraction of Al with the DEHPA microemulsion increased by a factor of about 10 with respect to that in the conventional DEHPA system, whereas the extraction of Zn was lower than that in the single DEHPA system. Extraction with the DEHPA-free microemulsion was very low, showing that metal ion solubilization was not important in the mechanism of microemulsion extraction. It is proposed that the effect of the mixed microemulsion on the metal distribution coefficient is the result of the balance between a decrease in the complexation reaction yield due to the interaction between butanol and DEHPA, and the adsorption of the metal complex at the macro- and microinterfaces. The former leads to a decrease in Zn(II) extraction and the latter to Al(III) extraction synergism. Copyright 2000 Academic Press.     

A substituent effects study reveals the kinetic pathway for an interfacial reaction

This paper describes the use of a substituent effects study to understand the mechanistic basis for an interfacial Diels-Alder reaction that does not proceed with standard second-order kinetics. Cyclopentadiene (Cp) undergoes a Diels-Alder reaction with a chemisorbed mercaptobenzoquinone to yield an immobilized Diels-Alder adduct. The pseudo-first-order rate constants are not linearly related to the concentration of diene, but they reach a limiting value with increasing concentrations of diene. The results of a substituent effects study support a mechanism wherein the electrochemical oxidation of hydroquinone produces two states of quinone. The first form, Q*, either reacts with Cp or isomerizes to Q, a form that is significantly less reactive with the diene. The interfacial reaction reaches a maximum rate when the concentration of diene is sufficiently high so that Q* undergoes complete Diels-Alder reaction and does not isomerize to Q. This work provides an example of the use of physical organic chemistry to understand an interfacial reaction.     

机械泵驱动两相回路的实时动态模型分析

在航空航天领域,为了加速系统设计及测试进度,通常需要进行半实物实时仿真,即控制器用实物,受控对象采用数学模型。本文开发出了基于Matlab/Simulink的两相传热模块,并用其搭建了某机械泵驱动两相回路的实时动态模型。通过与实验的对比,验证了模型的可靠性,表明该模型满足实时要求,可以在下一步用于半实物仿真。     

Perfluorocarbon thin films and polymer brushes on stainless steel 316 L for the control of interfacial properties

Perfluorocarbon thin films and polymer brushes were formed on stainless steel 316 L (SS316L) to control the surface properties of the metal oxide. Substrates modified with the films were characterized using diffuse reflectance infrared Fourier transform spectroscopy (DRIFT), contact angle analysis, atomic force microscopy (AFM), and cyclic voltammetry (CV). Perfluorooctadecanoic acid (PFOA) was used to form thin films by self-assembly on the surface of SS316L. Polypentafluorostyrene (PFS) polymer brushes were formed by surface-initiated polymerization using SAMs of 16-phosphonohexadecanoic acid (COOH-PA) as the base. PFOA and PFS were effective in significantly reducing the surface energy and thus the interfacial wetting properties of SS316L. The SS316L control exhibited a surface energy of 38 mN/m compared to PFOA and PFS modifications, which had surface energies of 22 and 24 mN/m, respectively. PFOA thin films were more effective in reducing the surface energy of the SS316L compared to PFS polymer brushes. This is attributed to the ordered PFOA film presenting aligned CF(3) terminal groups. However, PFS polymer brushes were more effective in providing corrosion protection. These low-energy surfaces could be used to provide a hydrophobic barrier that inhibits the corrosion of the SS316L metal oxide surface.     

Polystyrene formation on monolayer-modified nitinol effectively controls corrosion

A surface-initiated polymerization of styrene on carboxylic acid terminated phosphonic monolayers was utilized to increase the corrosion resistance of nitinol and nickel oxide surfaces. Alkyl chain ordering, organic reactions, wettability, and film quality of the monolayers and polymers were determined by infrared spectroscopy, atomic force microscopy, matrix-assisted laser desorption ionization spectrometry, and water contact angles. The polystyrene film proved to be a better corrosion barrier than phosphonic acid monolayers by analysis with cyclic voltammetry and electrochemical impedance spectroscopy. The protection efficiency of the polystyrene film on nitinol was 99.4% and the monolayer was 42%.     

Adsorption and desorption of stearic acid self-assembled monolayers on aluminum oxide

Development of coatings to minimize unwanted surface adsorption is extremely important for their use in applications, such as sensors and medical implants. Self-assembled monolayers (SAMs) are an excellent choice for coatings that minimize nonspecific adsorption because they can be uniform and have a very high surface coverage. Another equally important characteristic of such coatings is their stability. In the present study, both the bonding mechanism and the stability of stearic acid SAMs on two aluminum oxides (single-crystal C-plane aluminum oxide (sapphire) and amorphous aluminum oxide (alumina)) are investigated. The adsorption mechanism is investigated by ex situ X-ray photoelectron spectroscopy and infrared (IR) spectroscopy. The results revealed that stearic acid binds to sapphire surfaces via a bidentate interaction of carboxylate with two oxygen atoms while it binds to alumina surfaces via both bidentate and monodentate interactions. Desorption kinetics of stearic acid self-organized on both aluminum oxide surfaces into water is explored by ex situ tapping mode atomic force microscopy, IR spectroscopy, and contact angle measurements. The results exhibit that the SAMs of stearic acid formed on sapphire are not stable in water and are continuously lost through desorption. Water contact angle measurements of SAMs that are immersed in water further indicate that the desorption rate of adsorbates from atomically smooth terrace sites is substantially faster than that of adsorbates from the sites of surface defects due to weaker molecular interaction with the smooth surface. A time-dependent desorption profile of SAMs grown on amorphous alumina reveals that contact angles decrease monotonically without any regional distinction, providing further evidence for the presence of adsorption sites with different types of affinity on the amorphous alumina surface.     

Study of the formation of self-assembled monolayers on nitinol

Shape memory alloys such as nitinol (NiTi) have gained interest due to their unique and unusual properties of thermal shape memory, superelasticity, and good damping properties. Nitinol is mainly used for medical purposes. In order to control the surface properties of this alloy, self-assembled monolayers (SAMs) were formed and characterized on the native oxide surface of nitinol for the first time. Factors which affect the formation of SAMs, such as head group functionality, chain length, and tail group functionality, were varied and analyzed. Functionalized alkyl phosphonic acid molecules (OH, COOH, and CH3) formed monolayers on the nitinol surface using a simple deposition method resulting in the molecules being ordered and strongly bound to the surface. Diffuse reflectance infrared spectroscopy (DRIFT), contact angle goniometry, atomic force microscopy (AFM), and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) were used to characterize the surfaces before and after organic modification.     

Self-assembled monolayers of alkanoic acids on the native oxide surface of SS316L by solution deposition

Stainless steel 316L is a widely used biomaterial substrate whose biocompatibility could be improved by surface modification. As a first step in this process, self-assembled monolayers of octanoic acid, octadecylcarboxylic acid, 16-hydroxyhexadecanoic acid, 12-aminododecanoic acid, and 1,12-dodecane dicarboxylic acid have been formed on the native oxide surface of stainless steel 316L by a simple, one-step solution deposition method. The ordering, close-packing, and coverage of the monolayers formed were characterized by diffuse reflectance infrared spectroscopy, contact angle measurements, and atomic force microscopy. The same procedure was applicable for all long alkyl chain carboxylic acids. This process formed chemically and mechanically stable monolayers. These carboxylic acids formed a bidentate bond with the stainless steel substrate. Robust chemical attachment of the acids to stainless steel through a simple process provides a stepping stone to improving the biocompatibility of stainless steel 316L.     

Formation of self-assembled monolayers of alkylphosphonic acid on the native oxide surface of SS316L

Phosphonate-steel interactions have been industrially significant for decades, but details of the phosphonate-steel interface have not yet been characterized. Self-assembled monolayers of phosphonic acids were formed on stainless steel 316L by room-temperature solution deposition. The acids are covalently bound to the surface as phosphonates in a bidentate manner, as determined by diffuse reflectance Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy. Complete coverage of the surface is confirmed by contact angle measurement and atomic force microscopic imaging. This method of monolayer formation contrasts the requirement for heating and long reaction times found to be necessary to form phosphonate monolayers on other metal oxide substrates, such as titanium and silicon.     

An approach to differentiating between multi‐ and monolayers using MALDI‐TOF MS

Analysis and confirmation of monolayer film thickness on metal oxide surfaces has proven to be challenging. XPS and AFM have been used to investigate the monolayer formation. However, these techniques are difficult to access and/or determine the composition of the organic molecules on the surfaces. Here we demonstrate the ability of MALDI‐TOF to characterize long alkyl chain phosphonic acid molecules in thin films on titanium, iron and stainless steel. These systems are known to be stable, strongly adhered films. The thin films were characterized by IR, AFM, contact angle measurements and the results were confirmed by MALDI‐TOF. Moreover, the MALDI‐TOF was used to differentiate between mono‐ and multilayers on planar surfaces. Copyright © 2007 John Wiley & Sons, Ltd.