Surface characterization of recycled tire rubber to be used in cement paste matrix

The surface modification of tire rubber after treatment with saturated NaOH aqueous solution was investigated by HATR infrared analysis, potentiometric titration, and contact angle measurements. Infrared analysis of the powdered treated rubber showed a decrease in absorption at 1540, 1450, and 1395 cm(-1). This decrease is attributed to the removal of zinc stearate, an additive present in tire formulations that often migrates and diffuses to the surface, resulting in poor adhesion between the rubber and other materials. The potentiometric titration of the suspension of powdered rubber in 0.1 M NaCl showed that more hydrochloric acid was consumed by the untreated rubber, most likely a result of the hyrdrolysis of the zinc stearate to the organic acid. Contact angles of flat tire pieces showed an homogeneity enhancement of the treated rubber surface. The decrease of the zinc stearate on the treated rubber surface explains the improvement in the adhesion of this material to the cement matrix, observed in a previous research. The promising results of this study are a starting point for future research on incorporating rubber particles into cementitious materials as a means of successfully utilizing the vast amounts of tire waste currently in landfills.     

Microchip capillary electrophoresis/electrochemistry

Microfabricated fluidic devices have generated considerable interest over the past ten years due to the fact that sample preparation, injection, separation, derivatization, and detection can be integrated into one miniaturized device. This review reports progress in the development of microfabricated analytical systems based on microchip capillary electrophoresis (CE) with electrochemical (EC) detection. Electrochemical detection has several advantages for use with microchip electrophoresis systems, for example, ease of miniaturization, sensitivity, and selectivity. In this review, the basic components necessary for microchip CEEC are described, including several examples of different detector configurations. Lastly, details of the application of this technique to the determination of catechols and phenols, amino acids, peptides, carbohydrates, nitroaromatics, polymerase chain reaction (PCR) products, organophosphates, and hydrazines are described.     

High-performance liquid chromatographic determination of BRB-I-28, a novel antiarrhythmic agent, in dog plasma and urine.

A sensitive reversed-phase high-performance liquid chromatographic (HPLC) technique with ultraviolet detection has been developed to determine the concentration of BRB-I-28 (I), a novel antiarrhythmic agent, in dog plasma and urine. The mobile phase was acetonitrile-methanol-37.5 mM phosphate buffer, pH 6.8-triethylamine (50:50:75:0.1, v/v). The compound was extracted from dog plasma and urine with chloroform after alkalinization with sodium hydroxide. The extraction recovery was 83% from plasma and 84% from urine. Good linearity (r > 0.996) was observed throughout the ranges 0.1-12.0 micrograms/ml (plasma) and 0.1-8.0 micrograms/ml (urine). Intra- and inter-assay variabilities were less than 4%. The lower limit of quantitation was 0.08 microgram/ml in either plasma or urine. HPLC analysis of plasma and urine samples from a dog treated with I has demonstrated that the method was accurate and reproducible.     

High-throughput manual parallel synthesis using SynPhase crowns and lanterns

The high-throughput manual solid-phase parallel synthesis of libraries comprising thousands of discrete samples using pellicular supports (i.e. SynPhase crowns and lanterns) and a suite of novel tools and techniques is described. Key aspects of this approach include the combination of a split-split-split synthesis strategy with spatial encoding to differentiate thousands of crowns, the rapid washing and filtration of up to 48 reaction vessels in parallel, the application of an inexpensive and environmentally friendly technique to remove trifluoroacetic acid from sixteen 96-well plates in parallel, and a high-throughput method for removing cleaved crowns from reusable pin racks. Tens of thousands of discrete samples have been produced in-house using this conceptually and operationally straightforward strategy.     

Effects of thermal energy deposition on material ejection in poly(methyl methacrylate)

The effects of absorption of 7.9 and 5.0 eV photons by the polymer poly(methyl methacrylate) are studied using molecular dynamics simulations. By rapidly depositing a critical amount of thermal energy in the surface region (greater than 0.03 eV Å⁻³), a pressure wave is formed which causes spallation of the substrate. If there is only one photon absorbed per monomer unit of the polymer, the 7.9 eV photons can supply sufficient energy density to initiate ejection.